Dell 5100MP Projector Owners Manual
Here you can view all the pages of manual Dell 5100MP Projector Owners Manual. The Dell manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
Connecting Your Projector11 Connecting a Computer with a D-sub to D-sub Cable NOTE: The USB cable can not be connected if the USB Dongle is used, for the USB dongle connection refer to page 37. 1Po w e r c o rd 2D-sub to D-sub cable
Page 12
www.dell.com | support.dell.com 12Connecting Your Projector Connecting to a DVD Player Connecting a DVD Player with an M1 to HDTV Cable Connecting a DVD Player with a D-sub to YPbPr Cable NOTE: The D-sub to YPbPr cable is not provided by Dell. Consult a professional installer for the cable. 1Po w e r c o rd 2M1 to HDTV cable 1Power cord 2 D-sub to YPbPr cable
Page 13
Connecting Your Projector13 Connecting a DVD Player with a RCA to RCA Cable NOTE: The RCA to RCA cable is not provided by Dell. Consult a professional installer for the cable. Connecting a DVD Player with an S-video Cable 1Power cord 2 RCA to RCA component cable 1Power cord 2 S-video cable
Page 14
www.dell.com | support.dell.com 14Connecting Your Projector Connecting a DVD Player with a Composite Cable Connecting a DVD Player with a BNC to VGA cable NOTE: The BNC to VGA cable is not provided by Dell. Consult a professional installer for the cable. 1Power cord 2 Composite video cable 1Power cord 2BNC to VGA cable
Page 15
Connecting Your Projector15 Professional Installation Options: Installation for Driving Automatic Screen 1Power cord 212V DC power cord 3 Automatic screen
Page 16
www.dell.com | support.dell.com 16Connecting Your Projector Installation for wired RS232 remote control: Connection with PC NOTE: The RS232 cable is not provided by Dell. Consult a professional installer for the cable. 1Power cord 2 RS232 cable
Page 17
Connecting Your Projector17 Connection with Commercial RS232 Control Box: NOTE: The RS232 cable is not provided by Dell. Consult a professional installer for the cable. 1Power cord 2 RS232 cable 3 Commercial RS232 control box
Page 18
www.dell.com | support.dell.com 18Connecting Your Projector
Page 19
Using Your Projector19 3 Using Your Projector Turning Your Projector On NOTE: Turn on the projector before you turn on the source. The power button light blinks blue until pressed. 1Remove the lens cap. 2Connect the power cord and appropriate signal cables. For information about connecting the projector, see page 9. 3Press the power button (see page 23 to locate the power button). The Dell logo displays for 30 seconds. 4Turn on your source (computer, DVD player, etc.). The projector automatically...
Page 20
www.dell.com | support.dell.com 20Using Your Projector Adjusting the Projected Image Raising the Projector Height 1Press the elevator button. 2Raise the projector to the desired display angle, and then release the button to lock the elevator foot into position. 3Use the tilt adjustment wheel to fine-tune the display angle. Lowering the Projector Height 1Press the elevator button. 2Lower the projector, and then release the button to lock the elevator foot into position. 1Elevator button 2Elevator...