DELL 3330dn User Manual

4Press the down arrow button until Network Setup Page appears, and then press .
After the network setup page prints, Ready appears.
5Check the first section on the network setup page, and confirm that Status is “Connected.”
If Status is “Not Connected,” the LAN drop may not be active or the network cable may be malfunctioning. Consult
a system support person for a solution, and then print another network setup page.
Additional printer setup
31
 

Loading paper and specialty media
This section explains how to load the paper trays and the multipurpose feeder. It also includes information about
paper orientation, setting the Paper Size and Paper Type, and linking and unlinking trays.
Setting the Paper Size and Paper Type
When the Paper Size and Paper Type settings are the same for any trays, the trays are automatically linked.
Note: If you load a tray with paper that is the same size as the paper that was previously loaded in the tray, you do
not...

4Press the down arrow button until Universal Setup appears, and then press .
5Press the down arrow button until Units of Measure appears, and then press .
6Press the down arrow button until  appears next to the correct unit of measure, and then press .
Submitting selection appears, followed by the Universal Setup menu.
Specify the paper height and width
Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows
the printer to support the size,...

2Squeeze and slide the guides to the correct position for the paper size you are loading.
Loading paper and specialty media
34
 

For long paper like A4 or legal, squeeze and slide the length guide backwards to accommodate the length of
paper you are loading.
If you are loading A6-size paper:
aSqueeze and slide the length guide toward the center of the tray to the A5 size position.
bRaise the A6 backstop.
Notes:
The standard tray accommodates only 150 sheets of A6-size paper. Notice the maximum fill line on the A6
backstop which indicates the maximum height for loading A6-size paper. Do not try to overload the tray.
A6-size paper...

3Flex a stack of paper back and forth to loosen the sheets, and then fan them. Do not fold or crease the paper.
Straighten the edges on a level surface.
4Load the paper stack toward the back of the tray as shown with the recommended print side facedown.
Note: The maximum fill line on the width guide indicates the maximum height for loading paper. Do not load
A6-size paper to the maximum fill line; the tray holds only 150 sheets of A6-size paper.
1Maximum fill line
Load letterhead with the top edge of the...

5Squeeze and slide the guides to lightly touch the side of the stack.
6Insert the tray.
7If the paper type you loaded differs from the type that was previously loaded in the tray, then change the Paper
Type setting for the tray.
Loading paper and specialty media
37
 

Using the multipurpose feeder
Opening the multipurpose feeder
1Grasp the handle, and pull the multipurpose feeder door down.
2Grasp the raised handle, and pull the extension forward.
3Grasp the handle, and pull the extension so it flips forward.
Loading paper and specialty media
38
 

4Guide the extension down gently so the multipurpose feeder is extended fully and open.
Loading the multipurpose feeder
1Squeeze the tab located on the right width guide, and move the guides out fully.
2Prepare the paper or specialty media for loading.
Flex sheets of paper or paper labels back and forth to loosen them, and then fan them. Do not fold or crease
the paper or labels. Straighten the edges on a level surface.
Hold transparencies by the edges, and then fan them. Straighten the edges on a level...

Flex a stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level
surface.
Note: Fanning prevents the edges of envelopes from sticking together. It also helps them feed properly to
avoid jams. Do not fold or crease envelopes.
3Load the paper or specialty media.
Notes:
Do not force any paper into the multipurpose feeder. Overfilling may cause jams.
Do not exceed the maximum stack height by forcing paper or specialty media under the stack height limiters
which are...