DELL 3330dn User Manual

Understanding printer messages
When Manual Feeder appears on the display, it refers to the multipurpose feeder.
List of status and error messages
Activating Menu Changes
Wait for the message to clear.
Busy
Wait for the message to clear.
Busy ...
Wait for the message to clear.
Calibrating
Wait for the message to clear.
Cancel not available
Wait for the message to clear.
Canceling
Wait for the message to clear.
Cartridge Low
The toner cartridge is low on toner.
Try one of the following:
Remove the toner...

Cartridge Life Exceeded
The toner cartridge is exhausted.
1Remove the used toner cartridge, and then install a new one.
2Press  to clear the message.
Change  to 
Press the down arrow button until Continue appears, and then press  if the paper was changed.
Press the down arrow button until Use Current appears, and then press the down arrow button to print
on the paper currently in the printer.
Cancel the current print job.
For more information, select Show Me.
Clearing job accounting statistics
Wait for...

DO NOT TOUCH Reading flash data DO NOT POWER OFF
As a part of this message, a bar graphic appears on one line of the display, indicating the percentage of processing
time completed.
Wait for the message to clear. The message displays until all code is received and the processing is complete.
Warning—Potential Damage: If your printer is connected to a computer by a USB cable, do not touch the printer
control panel while this message appears on the display. Do not turn the printer off while this message...

Load  with 
Try one or more of the following:
Load the tray or other source with the correct paper type and size.
Cancel the current job.
Maintenance
Replace the maintenance items and, if necessary, reset the printer maintenance counter.
For information on purchasing supplies, see “Ordering supplies” on page 126.
Menu access turned off by system administrator
The printer menus cannot be accessed because your system support person disabled the menus. Wait for the message
to clear.
Menus are Disabled
The...

No jobs to cancel
Wait for the message to clear.
Not Ready
The printer is not ready to receive or process data, or the printer ports are offline.
Parallel/Parallel 
The printer is connected to a parallel port. Parallel interface is the active communication link. Parallel indicates
that the printer is using the parallel port. Parallel  indicates the active interface is connected to the printer
through PCI connector x.
Note: The current interface displays on the menus settings page.
Wait for the message to...