DELL 3330dn User Manual

USB menu
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PostScript emulation if the PS
Smartswitch setting is On. It uses the default printer language specified in the
Setup menu if the PS...

Menu itemDescription
ENA Address
...Sets the network address information for an external print server that is attached to
the printer using a USB cable
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
ENA Netmask
...Sets the netmask information for an external print server that is attached to the
printer using a USB cable
Note: This menu item is available only if the printer is attached to an external print
server through the USB port....

Menu itemDescription
Parallel Buffer
Disabled
Auto
3K to Sets the size of the parallel input buffer
Notes:
Auto is the factory default setting.
The Disabled setting turns off job buffering. Any jobs already buffered on the
disk are printed before normal processing is resumed.
The parallel buffer size setting can be changed in 1-K increments.
The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether Resource Save is set to On or Off.
To...

Menu itemDescription
Parallel with ENA
ENA Address
ENA Netmask
ENA GatewayENA Address sets the network address information for an external print server
that is attached to the printer using a parallel cable
ENA Netmask sets the netmask information for an external print server that is
attached to the printer using a parallel cable
ENA Gateway sets the gateway information for an external print server that is
attached to the printer using a parallel cable
Note: Parallel with ENA is available only if the...

Menu itemDescription
Device-Initiated E-mail
None
Use Device Credentials
User-Initiated E-mail
None
Use Device SMTP Credentials
Device Userid
Device password
Kerberos 5 Realm
NTLM DomainSpecifies server information
Notes:
The message boxes have a limitation of 512 characters.
None is the factory default setting for Device-Initiated E-mail and
User-Initiated E-mail.
Security menu
Miscellaneous menu
Menu itemDescription
Panel Logins
Login failures
Failure time frame
Lockout time
Login timeoutLimits the...

Menu itemDescription
Remote Logins
Login failures
Failure time frame
Lockout time
Login timeoutLimits the number and time frames of failed login attempts from a computer before
all remote users are locked out
Notes:
“Login failures” specifies the number of failed login attempts before users are
locked out. Settings range from 1–50. 3 attempts is the factory default setting.
“Failure time frame” specifies the time frame during which failed login attempts
can be made before users are locked out. Settings...

Menu itemDescription
Configure Log
Enable Audit
Yes
No
Enable Remote Syslog
No
Yes
Remote Syslog Facility
0–23
Severity of events to log
0–7Specifies whether and how the audit logs of print jobs are created:
Enable Audit determines if the printer records events in the secure audit log and
in the remote syslog.
Enable Remote Syslog determines if the printer sends logged events to a remote
server.
Remote Syslog Facility determines the facility value that the printer uses when
sending events to the remote...

Menu itemDescription
Enable NTP
On
OffEnables Network Time Protocol, which synchronizes the clocks of devices on a
network
Note: On is the factory default setting.
Settings menu
General Settings menu
Menu itemDescription
Display Language
English
Francais
Deutsch
Italiano
Espanol
Dansk
Norsk
Nederlands
Svenska
Portuguese
Suomi
Russian
Polski
Magyar
Turkce
Cesky
Simplified Chinese
Traditional Chinese
Korean
JapaneseSets the language of the text appearing on the display
Note: All languages may not be...

Menu itemDescription
Quiet Mode
Off
OnReduces the amount of noise produced by the printer
Notes:
Off is the factory default setting.
On configures the printer to produce as little noise as possible.
Run Initial setup
Yes
NoInstructs the printer to run the setup wizard
Notes:
Yes is the factory default setting.
After completing the setup wizard by selecting Done at the
Country select screen, the default setting becomes No.
Paper Sizes
US
MetricSets paper sizes to use the standard US sizes, which may also...

Menu itemDescription
Timeouts
Print Timeout
Disabled
1 sec–255 secSets the amount of time in seconds the printer waits to receive an
end-of-job message before canceling the remainder of the print
job
Notes:
90 seconds is the factory default setting.
When the timer expires, any partially printed page still in the
printer is printed, and then the printer checks to see if any new
print jobs are waiting.
Timeouts
Wait Timeout
Disabled
15 sec–65535 secSets the amount of time in seconds the printer waits for...