Dell 3007wfp Users Guide

							- HC Flat Panel Monitor Users Guide  
 
Information in this document is subject to change without notice.  
 
Reproduction in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:   and  Dell | EMC  are trademarks of 
Dell Inc;   Microsoft, Windows  and  Windows NT  are registered trademarks of Microsoft Corporation;  Adobe  is a trademark of Adobe Systems Incorporated, which may be registered in 
certain jurisdictions.   ENERGY STAR  is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product 
meets the ENERGY STAR guidelines for energy efficiency.  EMC  is a registered trademark of EMC Corporation.  
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own.  
November 2006 Rev. A00    About Your Monitor  
Front View    
Back View   
Side View   
Bottom View   
Monitor Specifications  
Dell Soundbar (Optional) Specifications    
Caring for Your Monitor    
Using Your Adjustable Monitor Stand  
Organizing Your Cables  
Using the Tilt, Swivel, Height Adjustment   
Setting Up Your Monitor  
Connecting  Your Monitor  
Installing the Utility Tool (Microsoft ®  Windows ®  Operation Systems)  
Using the Front Panel Buttons  
Using the OSD  
Using the Dell Soundbar (Optional)   Solving Problems  
General Problems  
Product Specific Problems  
USB Problems  
Troubleshooting Your Soundbar  
   
   
   
Appendix  
CAUTION: Safety Instructions  
FCC Identification Information  
Contacting Dell  
     
						

							Back to Contents Page    
 
About Your Monitor   
- HC Flat Panel Monitor Users Guide  
   Front View  
   Back View  
   Bottom View  
   Side View  
   Card Reader Specificatoins  
   Monitor Specifications  
   Dell Soundbar (Optional) Specifications  
   Caring for Your Monitor  
 
Front View  
 
 
Back View  1. Decrease Brightness button
2.  Increase Brightness button
3. Power button (with power light indicator)  
						

							Bottom View  
 
Side View  1.   Dell Soundbar mounting brackets  —   Attach the optional Dell Soundbar.  
2.   Security lock slot  —    Attach a lock to secure your monitor.  
3.   VESA mounting holes (100mm [Behind attached base plate])  —   Use to mount the monitor.
4.   Regulatory rating label  —   Lists the regulatory approvals.
5. Cable management hole  —   Organize cables by placing them through the hole.
6. Service tag label —   Refer to this label if you need to contact Dell for technical support.
7. Barcode serial number label 
8. Lock down/release button  —   Push the monitor down, press the button to unlock the monitor, and then lift the 
monitor to the desired height.
1. Power  -  Connect the power 
2. Dell Soundbar power connector  -  Connect for the Soundbar (optional)
3. DVI connector  -  Connect your computer DVI cable
4. USB upstream port  -  Connect the  USB cable that came with your monitor to the monitor and the computer. Once this cable is connected you can use the 
USB connectors on the side and bottom of the monitor. 
5. USB downstream port  -  Connect your USB devices. You can only use this port after you have connected the USB cable to the computer and USB upstream 
port on the monitor.
   
						

							   
     
Monitor Specifications  
Power Management Modes  
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in 
use. This is referred to as Power Save Mode*. If input from keyboard, mouse, or other input devices is detected by the computer, the monitor automatically 
resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:   
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.  
ENERGY STAR ®  is a U.S. registered mark. As an  ENERGY STAR ®  Partner, DELL has determined that this product meets the  ENERGY STAR ® 
guidelines for energy efficiency.   
Pin Assignments  
24 pin digital - only DVI - D connector:   
   
Left side   Right side  
1. Card reader supports the following card types:
- Compact Flash (CF I/II)
- Microdrive 
- Security Digital (SD/Mini SD)
- Memory Stick (MS/MS Pro, MS Pro Duo)
- Smart Media (SM)
- Multimedia Card (MMC)
2. USB downstream port 
VESA Modes Horizontal Sync Vertical Sync  Video Power Indicator Power Consumption
Normal operation( with Dell Soundbar and USB active) Active Active Active  Blue 147 W (maximum)
Normal operation Active Active Active  Blue 117 W (typical)
Active - off mode Inactive Inactive Blanked Amber Less than 3 W
Switch off -   -   -   Off Less than 1 W
This monitor is  ENERGY STAR ® - compliant as well as TCO 99 power management compatible.  
						

							 
The following table shows pin assignments in the DVI connector:  
Universal Serial Bus (USB) Interface  
USB ports:    
l 1 upstream  -   rear   
l 4 downstream  -   2 on rear; 2 on left side  
Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended 
Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. 
Most monitor installations are automatic; you can select different settings, if desired.  
Card Reader Specifications  
Overview  
l The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.   
    
l The Flash Memory Card Reader is automatically recognized by Windows ®  2000, XP and Vista.   
    
l Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.   
    
l All standard file operations (copy, delete, drag - and - drop, etc.) can be performed with this drive.   
Features  
The Flash Memory Card Reader has the following features:  
l Supports Windows 2000, XP and Vista operating systems.  
     Pin 1 is at the top right. 
Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment
1 T.M.D.S. Data 2 - 9 T.M.D.S. Data 1 - 17 T.M.D.S. Data 0 -
2 T.M.D.S. Data 2+ 10 T.M.D.S. Data 1+ 18 T.M.D.S. Data 0+
3 T.M.D.S. Data 2/4 Shield 11 T.M.D.S. Data 1/3 Shield 19 T.M.D.S. Data 0/5 Shield
4 T.M.D.S. Data 4 - 12 T.M.D.S. Data 3 - 20 T.M.D.S. Data 5 -
5 NT.M.D.S. Data 4+ 13 T.M.D.S. Data 3+ 21 T.M.D.S. Data 5+
6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock Shield
7 DDC Data 15 Ground (for +5V) 23 T.M.D.S. Clock +
8 No Connect 16 Hot Plug Detect 24 T.M.D.S. Clock  -
This monitor supports High - Speed Certified USB 2.0 interface.* 
 
  Data Rate  Power Consumption
High speed  480 Mbps  2.5W (Max., each portyf
Full speed  12 Mbps  2.5W (Max., each portyf
Low speed  1.5 Mbps  2.5W (Max., each portyf
NOTE:   USB 2.0 capability requires 2.0 capable computer.
Monitors USB interface works ONLY when monitor is Powered ON (or in Power Save Mode). Switching your monitor OFF and then ON would re -
enumerate its USB interface; attached peripherals may take a few seconds to resume normal functionality.   
						

							l No Windows 9X support from Dell.   
    
l Mass Storage Class device (No drivers are required under Windows 2000, XP and Vista).   
    
l USB - IF certification.   
    
l Supports various memory card media.  
 
 
    
   
   
   
   
   
   
   
The following table lists the slot to support what kind of memory card:  
   Slot Number Flash memory cards type
1 Compact Flash type I/II Card (CF I/II)/CF form factor ATA hard drives to USB 2.0 bus
2  
Smart Media Card (SMC)  
Memory Stick Card (MS) / High Speed Memory Stick (HSMS) / Memory Stick Pro Card (MS PRO) / Memory Stick Duo (with Adapter)  
Secure Digital Card (SD)/ Mini Secure Digital (with Adapter)/ TransFlash Card (with Adapter)  
MultiMedia Card (MMC) / Reduced Size MultiMedia Card (with Adapter)  
Cards Type
Support Specification Memory Card Spec 
Version Max. capacity
CF  
SD   
MS  
MS PRO  
MD Duo  
SM  
SM  
SM  
MMC   CompactFlash Specification  
SD Memory Card Specifications   
Memory Stick Standard Format Specification  
Memory Stick Pro Standard Format Specifications  
Memory Stick Duo Standard Format Specifications  
SmartMedia™ Electrical Specification  
SmartMedia™ Physical Format Specifications  
SmartMedia™ Logical Format Specifications  
MultiMediaCard System Specification   2.0
2.0  
1.40 - 00  
1.01 - 01  
1.10 - 00  
1.40  
1.40  
1.30  
4.2   128 GB   
32 GB  
128 MB  
32 GB  
128 MB/32 GB  
256 MB  
256 MB  
256 MB  
32 GB  
NOTE:   MSPRO : MSPRO includes MSPRO Duo and MS Micro.
NOTE:   SD : SD includes MiniSD.
General  
Model number 3007WFP - HC
Flat Panel  
Screen type Active matrix  -  TFT LCD
Screen dimensions 30 inches (30 - inch viewable image size)
Preset display area:
Horizontal   641.28 mm (25.25 inches)
Vertical   400.8 mm (15.78 inches)
Pixel pitch 0.2505 mm x 0.2505 mm 
Viewing angle 178° (verticalyfW\S
						

							Resolution  
Horizontal scan range 49.31 kHz and 98.71 kHz (automatic)
Vertical scan range 60 Hz 
Optimal preset resolution 2560 x 1600 at 60 Hz
Highest preset resolution 2560 x 1600 at 60 Hz
Preset Display Modes  
Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical)
VESA, 1280 x 800 49.31 59.91 71 - /+
VESA, 2560 x 1600  98.71 59.97 134.25 - /+
Electrical  
Video input signals Digital DVI - D TMDS (Dual Link), 600mV for each differential line, positive polarity at 100 
ohm input impedance with HDCP Support
AC input voltage / frequency / current 100 to 240 VAC / 50Hz/60 Hz  +  3 Hz / 1.6A (Max.)
Inrush current
120V:30A (Max.) at 0 o
c  
240V:60A (Max.) at 0 o
c
Physical  Characteristics  
Connector type DVI - D, white connector
Signal cable type Digital: Detachable, DVI - D (Dual Link), Solid pins
Dimensions (with stand):
Height (fully extended in landscape mode)   559.7 mm (22 inches)
Height (compressed/locked in landscape mode)   469.7 mm (18.49 inches)
Width   690 mm (27.16 inches)
Depth   200 mm (7.87 inches)
Panel Dimensions: (without stand)      
Height    449.55 mm (17.7 inches)
Width   690 mm (27.16 inches)
Depth   74.4 mm (2.93 inches)
Stand dimensions:      
Height (Compressed)   306.7 mm (12.07 inches)  
Height (Extended)   396.7 mm (15.62 inches)
Width   404 mm (15.9 inches)  
Depth   200 mm (7.87 inches)  
Weight (monitor only) 11.38 Kg (25.07 lbyf
Weight (with packaging) 16 Kg (35.24 lbyf
Environmental    
						

							               
   
Dell Soundbar (Optional) Specifications  
Caring for Your Monitor  
l To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen - cleaning tissue or solution suitable for 
the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.   
l Use a slightly - dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.    
l If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.   
l Handle your  monitor with care as darker - colored plastics may scratch and show white scuff marks more than lighter - colored monitor.    
l Tohelp maintain the best image quality on your monitor, use a dynamically changing screen saver and power off yourmonitor when not in use.   
     
Back to Contents Page  
    Temperature:
Operating   5° to 35°C (41° to 95°Fyf
Nonoperating   Storage:  - 20° to 60°C ( - 4° to 140°Fyf  
Shipping:  - 20° to 60°C( - 4° to 140°Fyf
Humidity:
Operating   10% to 80% (noncondensing)
Nonoperating   Storage: 5% to 90% (noncondensing)  
Shipping: 5% to 90%(noncondensing)
Altitude:
Operating   3,657.6m (12,000 ft) max
Nonoperating   12,192 m (40,000 ft) max
Thermal dissipation 501.92  BTU/hour (maximum)  
399.5  BTU/hour (typical)  
System Frequency Response 95 Hz to 20 kHz @ 10 dB below avg. SPL
Total Power Output 10 W continuous average power (all speakers operating) @ 10% (THD+N), 1 kHz (FTC rated) 
Headphone Jack   
Output Power 40 mW continuous average power (RL = 32 Ω ) @  10% (THD+N), 1 kHz
Input Sensitivity for   
Rated Output 500  ±   50 mVrms @ 1 kHz
Input Impedance >10k Ω 
Maximum Input Signal 
Voltage 2 Vrms 
Controls Power On/Off Volume Control
Input Cables 3.0 m  ±   0.1 m AWG26 black cable attached to enclosure, with 3.5 mm lime green stereo plug
Power Requirements DC12V, 1.5A +/ - 10%
Operating Temperature 
Range 10°C to 40°C
Humidity, Non - condensing 95yb5+#
						

							Back to Contents Page    
 
Appendix   
- HC Flat Panel Monitor Users Guide  
   CAUTION: Safety Instructions  
   FCC Notice (U.S. Only)  
   Contacting Dell  
   Your Monitor Setup Guide  
   
CAUTION: Safety Instructions  
Use the following safety guidelines to help ensure your own personal safety and to help protect your computer and working environment from potential 
damage.  
l   To help avoid damaging your computer, be sure that the voltage selection switch on the power supply for the computer is set to match the alternating 
current (AC) power available at your location:   
 
  115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries such as Japan, South Korea (also 220 volts (V)/60 
hertz (Hz)), and Taiwan.   
 
  230 volts (V)/50 hertz (Hz) in most of Europe, the Middle East, and the Far East.   
 
l   Always be sure that your monitor is electrically rated to operate with the AC power available in your location.   
 
NOTE:  This monitor does not need or have a voltage selection switch for setting the AC voltage input. It will automatically accept any AC input voltage 
according to the ranges defined in the Electrical Specifications section in the Users Guide.   
l   Do not store or use the monitor in locations that are exposed to heat, direct sunlight, or extreme cold.   
 
l   Avoid moving the monitor between locations with large temperature differences.   
 
l   Do not subject the monitor to severe vibration or high impact conditions. For example, do not place the monitor inside a car trunk.   
 
l   Do not store or use the monitor in locations exposed to high humidity or dusty environment.   
 
l   Do not allow water or other liquids to spill on or into the monitor.   
 
l   Keep flat panel monitor in room temperature conditions. Excessive cold or hot conditions can have an adverse effect on the liquid crystal of the display.   
 
l   Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock.   
 
l   To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor case.   
 
l   Never use your monitor if the power cable has been damaged. Ensure that nothing rests on your computers cables and that the cables are not located 
where they can be stepped on or tripped over.   
 
l   Be sure to grasp the plug, not the cable, when disconnecting the monitor from an electric socket.   
 
l   Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Avoid using the 
monitor on a bed, sofa, rug, or other soft surface, as doing so may block the ventilation openings in the bottom of the cabinet. If you place the monitor 
in a bookcase or an enclosed space, be sure to provide adequate ventilation and air flow.   
 
l   Place your monitor in a location with low humidity and minimum dust. Avoid places similar to a damp basement or dusty hallway.   
 
l   Do not expose the monitor to rain or use it near water (in kitchens, next to swimming pools, etc.). If the monitor accidentally gets wet, unplug it and 
contact an authorized dealer immediately. You can clean the monitor with a damp cloth when necessary, being sure to unplug the monitor first.   
 
l   Place the monitor on a solid surface and treat it carefully. The screen is made of glass and can be damaged if dropped or hit sharply.   
 
l   Locate your monitor near an easily accessible electric outlet.   
 
l   If your monitor does not operate normally  -  in particular, if there are any unusual sounds or smells coming from it  -  unplug it immediately and contact an 
authorized dealer or service center.   
 
l   Do not attempt to remove the back cover, as you will be exposed to an electrical shock hazard. The back cover should only be removed by qualified 
service personnel.   
 
l   High temperatures can cause problems. Dont use your monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources 
of heat.   
 
l   Unplug the monitor when it is going to be left unused for an extended period of time.   
 
l   Unplug your monitor from the electric outlet before any service is performed.   
 
l     LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR 
MORE INFORMATION, GO TO  WWW.DELL.COM/HG  OR CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT  WWW.EIAE.ORG .   CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, 
electrical hazards, and/or mechanical hazards.   
						

							FCC Notice (U.S. Only)  
FCC Class B  
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer ’ s instruction 
manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital 
device pursuant to Part 15 of the FCC Rules.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
1 This device may not cause harmful interference.  
2 This device must accept any interference received, including interference that may cause undesired operation.  
These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be 
determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:  
l Reorient the receiving antenna.   
l Relocate the system with respect to the receiver.   
l Move the system away from the receiver.   
l Plug the system into a different outlet so that the system and the receiver are on different branch circuits.   
If necessary, consult a representative of Dell Inc. or an experienced radio/television technician for additional suggestions.  
The following information is provided on the device or devices covered in this document in compliance with FCC regulations:  
l Product name: 3007WFPt   
l Model number: 3007WFPt   
l Company name:   
Dell ™  Inc.  
Worldwide Regulatory Compliance & Environmental Affairs.  
One Dell™ Way  
Round Rock, Texas 78682 USA  
512 - 338 - 4400  
NOTE:   For further regulatory information, see your  Product Information Guide .   
Contacting Dell  
To contact Dell electronically, you can access the following websites:  
l www.dell.com  
 
l support.dell.com  (support)  
For specific web addresses for your country, find the appropriate country section in the table below.   
 
NOTE:  Toll - free numbers are for use within the country for which they are listed.   
 
NOTE:  In certain countries, support specific to Dell XPS™ portable computers is available at a separate telephone number listed for participating countries. 
If you do not see a telephone number listed that is specific for XPS portable computers, you may contact Dell through the support number listed and your call 
will be routed appropriately.  
When you need to contact Dell, use the electronic addresses, telephone numbers, and codes provided in the following table. If you need assistance in 
determining which codes to use, contact a local or an international operator.  
NOTE:  The contact information provided was deemed correct at the time that this document went to print and is subject to change.   
  NOTICE:  The FCC regulations provide that changes or modifications not expressly approved by Dell ™  Inc. could void your authority to operate this equipment. 
Country (City)  
International Access Code Country 
Code  
City Code Department Name or Service Area,  
Website and E - Mail Address   Area Codes,  
Local Numbers, and 
Toll - Free Numbers  
  Anguilla   Website:  www.dell.com.ai  
E - mail: la - [email protected]