Dell 2707wfp Users Guide
Have a look at the manual Dell 2707wfp Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Notes, Notices, and Cautions Information in this document is subject to change without notice. 2007 Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell , the DELL logo, Inspiron , Dell Precision , Dimension , OptiPlex , Latitude, PowerEdge, PowerVault, PowerApp, and Dell OpenManage are trademarks of DellInc; Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation; Adobe is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. Mod el 2707WFP June 2007 Rev. A01 About Your Monitor Front View Back View Side View Bottom View Monitor Specifications Universal Serial Bus (USB) Interface Card Reader Specifications Plug and play capability Caring for Your Monitor Using Your Adjustable Monitor Stand Organizing Your Cables Using the Tilt, Swivel and Vertical Extension Setting Up Your Monitor Connecting Your Monitor Using the Front Panel Buttons Using the OSD Using the Dell Soundbar (Optional) Setting the Optimal Resolution Solving Problems Monitor Specific Troubleshooting Common Problems Video Problems Product Specific Problems Universal Serial Bus (USB) Specific Problems Dell Soundbar (Optional) Troubleshooting Card Reader Troubleshooting Appendix FCC Notice (U.S. Only) Safety Instructions Contacting Dell Your Monitor Setup Guide Product Information Guide NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Back to Contents Page About Your Monitor Dell 2707WFP Flat Panel Monitor Users Guide Front View Front View Back View Side View Bottom View Monitor Specifications Universal Serial Bus (USB) Interface Card Reader Specifications Plug and play capability Caring for Your Monitor 1 Input indicators 2 Input Source Select 3 PIP (Picture In Picture) / PBP (Picture By Picture) Select 4 OSD Menu / Select 5 Brightness / Contrast Hotkey and Down ( - ) button 6 Auto Adjust and Up (+) button 7 Power button (with power light indicator)
Back View Side View Bottom View 1 Barcode serial number label Indicates the service part number for the monitor. 2 Security lock slot Use a security lock with the slot to help secure your monitor. 3 Dell Soundbar mounting brackets Attach the optional Dell Soundbar. 4 Regulatory rating label List the regulatory approvals. 5 Service tag label Refer to this label if you need to contact Dell for technical support. 6 Connectors label Indicate the positions and types of connectors. 7 VESA mounting holes (100mm) Use to mount the monitor. 8 Cable management hole Help organize cables by placing them through the hole. Left side Right side 1 Card reader: for details please refer to Card Reader Specifications 2 USB downstream ports
Monitor Specifications 1 AC power cord connector 2 DC power connector for Dell Soundbar 3 DVI connector 4 VGA connector 5 Composite video connector 6 Component video connector - Y 7 S - Video connector 8 USB upstream port 9 USB downstream ports 10 Component video connector - Pr 11 Component video connector - Pb General Model number 2707WFP Flat Panel Screen type Active matrix - TFT LCD Screen dimensions 27 inches (27 - inch viewable image size) Preset display area: Horizontal 581.96 mm (22.9 inches) Vertical 363.60 mm (14.30 inches) Pixel pitch 0.303 mm Viewing angle +/ - 89° (verticalyfW\S/ - 89° (horizontalyfW\p Luminance output 450 cd/m ² ( typ) Contrast ratio 1000:1 (typ) Faceplate coating Antiglare with hard - coating 3H Backlight 16 CCFLs Direct - type backlight, 92% wide color gamut Response Time 6 ms typical (Grey to GreyyfPVW\SLFDO %ODFNWR:KLWH\f Resolution Horizontal scan range 30 kHz to 81 kHz (automatic) Vertical scan range 56 Hz to 76 Hz, exception 1680 x 1200 & 1920 x 1200 at 60 Hz only Optimal preset resolution 1920 x 1200 at 60 Hz (VESA CVT - R Mode) Highest preset resolution 1920 x 1200 at 60 Hz (VESA CVT - R Mode)
Video Supported Modes Video display capabilities (DVI playback) 480p/576p/720p/1080p(Supports HDCP) Video display capabilities (Composite playback) NTSC/PAL Video display capabilities (S - Video playback) NTSC/PAL Video display capabilities (Component playback) 480i/480p/576i/576p/720p/1080i Preset Display Modes Dell guarantees image size and centering for all preset modes listed in the following table. Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) VGA, 720 x 400 31.5 70.1 28.3 - /+ VGA, 640 x 480 31.5 59.9 25.2 - / - VESA, 640 x 480 37.5 75.0 31.5 - / - VESA, 800 x 600 37.9 60.3 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 - / - VESA, 1024 x 768 60.0 75.0 78.8 +/+ VESA, 1152 x 864 67.5 75.0 108.0 +/+ VESA, 1280 x 1024 64.0 60.0 108.0 +/+ VESA, 1280 x 1024 80.0 75.0 135.0 +/+ VESA, 1600 x 1200 75.0 60.0 162.0 +/+ VESA, 1920 x 1200 74.0 60.0 154.0 +/ - Electrical Video input signals Analog RGB, 0.7 Volts +/ - 5ybRKPLQSXWLPSHGDQFH Digital DVI - D TMDS, 600mV for each differential line, 50 ohm input impedance with HDCP support. S - video, Y input 1 volt (p - p), C input 0.286 volt (p - p), 75 ohm input impedance Composite, 1 volt (p - p), 75 ohm input impedance Component: Y, Pb, Pr are all 0.5~1volt (p - p), 75 ohm input impedance Synchronization input signals separate horizontal and vertical, 3.3V CMOS or 5V TTL level, positive or negative sync. SOG (Sync on green) AC input voltage / frequency / current 100 to 240 VAC / 50 or 60 Hz + 3 Hz / 3.0A Inrush current 120V: 40A (Max.) 240V: 80A (Max.) Physical Characteristics Signal cable type D - sub: Detachable, Analog, 15pin, shipped attached to the monitor DVI - D: Detachable, Digital, 24pin, shipped detached from the monitor S - video: Not included with display Composite: Not included with display Component: Not included with display Dimensions (with stand): Height (Fully extended ) 532.75 mm (20.97 inches) Height (Compressed) 441.80 mm (17.39 inches) Width 634.00 mm (24.96 inches) Depth 243.15 mm (9.57 inches)
Power Management Modes * Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. Pin Assignments VGA Connector Weight Monitor (Stand and Head) 12.5 Kg (27.5 lb) Monitor Flat panel only (VESA Mode) 8.5 Kg (18.7 lb) Weight with packaging 16.0 Kg (35.28 lb) Environmental Temperature: Operating 5° to 35°C (41° to 95°Fyf Non - operating Storage: 0° to 60°C (32° to 140°Fyf Shipping: - 20° to 60°C ( - 4° to 140°Fyf Humidity: Operating 10% to 80% (non - condensing) Non - operating Storage: 5% to 90% (non - condensing) Shipping: 5% to 90% (non - condensing) Altitude: Operating 3,657.6 m (12,000 ft) max Non - operating 12,192 m (40,000 ft) max Thermal dissipation 375.0 BTU/hour (maximum) 195.0 BTU/hour (typical) If you have VESAs DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as Power Save Mode*. If activity from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically wake up. The following table shows the power consumption and signaling of this automatic power saving feature: VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Normal operation Active Active Active Blue 140W (maximum)* 75W (normal)** Active - off mode Inactive Inactive Blanked Amber Less than 2 W Switch off - - - Off Less than 1 W (at 230 V) * With Audio + USB ** Without Audio + USB This monitor is ENERGY STAR ® - compliant.
Pin Number 15 - pin Side of the Co nnected Signal Cable 1 Video - Red 2 Video - Green 3 Video - Blue 4 GND 5 Self - test 6 GND - R 7 GND - G 8 GND - B 9 Computer 5V/3.3V 10 GND - sync 11 GND 12 DDC data 13 H - sync 14 V - sync 15 DDC clock Pin Number 24 - pin Side of th e Co nnected Signal Cable 1 TMDS RX2 - 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data/span> 8 Floating 9 TMDS RX1 - /span> 10 TMDS RX1+ 11 TMDS Ground 12 Floating
S - video Connector Composite V ideo Connector Component Video Connector Universal Serial Bus (USB) Interface 13 Floating 14 +5V / +3.3V power 15 Self test 16 Hot Plug Detect 17 TMDS RX0 - 18 TMDS RX0+ 19 TMDS Ground 20 Floating 21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock - Pin Number 5 - pin Side of the C o nnected Signal Cable (Cable not included) 1 GND 2 GND 3 LUMA 4 CHROMA Pin Number 1 - p in Side of the C onnected Signal Cable (cable not included) 1 LUMA COMPOSITE CHROMA Pin Number 3 - pin Side of the C onnected Signal Cable (Cable not included) 1 Pr (Color differential signal) 2 Pb (Color differential signal) 3 Y (Luminance signal)
USB Upstream C onnector USB Downstream C onnector USB P orts l 1 upstream - rear l 4 downstream - 2 on rear; 2 on left side Card Reader Specifications Overview l The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card. This monitor supports High - Speed Certified USB 2.0 interface. Data Rate Power Consumption High speed 480 Mbps 2.5W (Max., each portyf Full speed 12 Mbps 2.5W (Max., each portyf Low speed 1.5 Mbps 2.5W (Max., each portyf Pin Number 4 - pin Side of the Connector 1 DMU 2 VCC 3 DPU 4 GND Pin Number 4 - Pin Side of the Signal Cable 1 VCC 2 DMD 3 DPD 4 GND NOTE: USB 2.0 capability requires 2.0 capable computer NOTE: The monitors USB interface works only when the monitor is on or in power save mode, If you switch the monitor off and then on, attached peripherals may take a few seconds to resume normal functionality.
l The Flash Memory Card Reader is automatically recognized by Windows ® 2000 and XP. l Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter. l All standard file operations (copy, delete, drag - and - drop, etc.) can be performed with this drive. Features The Flash Memory Card Reader has the following features: l Supports Windows 2000 and XP operating systems l No Windows 9X support from Dell l Mass Storage Class device (No drivers are required under Windows 2000 and XP) l USB - IF certification l Supports various memory card media General Performance Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user can select different settings; but in most cases, monitor installation is automatic. Slot Number Type of Flash Memory Card 1 Compact Flash type I/II Card (CF I/II) / CF form factor ATA hard drives to USB 2.0 bus 2 Smart Media Card (SMC) Memory Stick Card (MS) / H igh Speed Memory Stick (HSMS) / Memory Stick Pro Card (MS PRO) / Memory Stick Duo (with Adapter) Secure Digital Card (SD)/ Mini Secure Digital (with Adapter)/ TransFlash Card (with Adapter) MultiMedia Card (MMC) / Reduced Size MultiMedia Card ( with Adapter) Connection type USB 2.0 High Speed Device (USB Full Speed Device compatible) Supported OS Windows 2000 and XP Transfer Speed Read: 480 Mb/s (max.) Write: 480 Mb/s (max.)