Dell 2707wfp Users Guide

   
To connect your monitor to the computer, perform the following steps/instructions.  
l Turn off your computer, and disconnect the power cable.   
l Connect either the white (digital DVI - DyfRUWKHEOXHDQDORJ9*$\f display connector cable to the corresponding video port on the back of your computer. Do 
not use both cables on the same computer.   The only case in which both cables can be used is if they are connected to two different computers with appropriate 
video systems. (Graphics are for...

If either VGA or DVI - D input is selected and both VGA and DVI - D cables are not connected, a floating dialog box as shown below appears.
If either S - Video or Composite input is selected and both cables are not connected or the video source is turned off, the screen does not have an 
image. If any button is pressed (except power button), the monitor displays the following message:  
 
      OR
    
  OR  
B
 
   
PIP / PBP Select   Use this button to activate PIP (Picture - in - Picture) / PBP...

   
Using the OSD  
Accessing the Menu System  
    
1.   Push the MENU button to launch the OSD menu and display the main menu.  
Main Menu for PC (Analog (VGA), Digital (DVI - D)) Input  
Or  
Main Menu for Non PC (Analog (VGA), Digital (DVI - D))  Input  
 
2.   Push the    and   buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table for a 
complete list of all the options available for the monitor.   
3.   Push the MENU button...

 
 
 
 
  Back  
Brightness  
Contrast  
Exit Menu   Push    to go back to the main menu.
Brightness adjusts the luminance of the backlight.   
Push the   button to increase brightness and push the   button to decrease brightness (min 0 ~ max 100).   
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.  
Push the   button to increase contrast and push the   button to decrease contrast (min 0 ~ max 100).   
The Contrast function adjusts the degree of difference...

 
 
 
 
  Composite
Component
Scan for Sources  
Exit Menu   Select Composite input when you are using composite video connector. Push   to select the composite input source. 
Select Component input when you are using component video connector. Push   to select the component input source. 
Push   to scan for available input signals.
Push   to exit the OSD main menu.
 
 
 
  
 
  COLOR SETTINGS  
BACK
Color Settings Mode  
(VGA/DVI - D )
Color Adjustment
  
 
  Color Settings adjusts the color setting...

  Color Format  
(Video/DVI - HD)  
Hue
 
 
Saturation
 
 
Color Reset
Exit Menu To achieve the different color domain for PC RGB and HD YPbPr (HD YPbPr is suitable for HD video playback over DVI. PC RGB is suitable for normal PC graphics display 
over DVI.)
This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color. Use 
makes video image shade into greenish  
makes video image shade into purplish  
 NOTE:  Hue adjustment only available for...

    
   
 
  
Back  
Wide Mode  
H Position  
V Position  
Sharpness  
Zoom  
Horizontal Pan  
 
   
Pixel Clock  
Phase  
 
Audio Option  
Display Info  
Display  
Exit Menu  
    Push   to go back to the main menu.
Adjust the image ratio as 1:1, aspect(16:10) or full screen.  
Use  the  and   buttons to adjust image left and right. Minimum is 0 ( - ). Maximum is 100 (+).  
Use  the  and  buttons to adjust image up and down. Minimum is 0 ( - ). Maximum is 100 (+).
This feature can make the image look...

   
   
   
   
     
Back  
Language  
Menu Horizontal 
Position 
 
Menu Timer  
Transparency  
Menu Lock  
Factory Reset  
DDC/CI  
Exit Menu   Push  to go back to the main menu.
Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, Japanese).
and   buttons move OSD left and right.  
 and   buttons move OSD up and down.  
OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.  
Use the   and    buttons...

   
OSD Warning Messages    
Back  
Mode  
When  PIP/PBP activated  
PIP/PBP Source  
PIP Position  
PIP Size  
PIP/PBP Contrast  
PIP /PBP  Hue/Tint  
PIP /PBP  Saturation  
Exit Menu   PIP/PBP submenu when PIP/PBP ON (main source is VGA/DVI - D 
input)                 PIP/PBP submenu when PIP/PBP ON (main source is Video input)
      OR
Push     to go back to the main menu.
There are  two modes: PIP (Picture in Picture)  and PBP (Picture By Picture)  
Use   and   to browse and   to select Off, PIP or...

   
   
   
See  Solving Problems  for more information.   
   
Using the Dell Soundbar (Optional)  This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See  Monitor Specifications  for the Horizontal and 
Vertical frequency ranges addressable by this monitor. Recommended mode is  1920 X 1200.  
   
You will see the following message before the DDC/CI function is disabled.   
 
   
When monitor enters Power Save mode, the following message appears :...