Dell 2408wfp Users Guide

   
Universal Serial Bus (USB) Interface  
USB Upstream  C onnector  
   
    
USB Downstream  C onnector  
   
     Operating   5° to 35°C  (41° to 95°F )  
Nonoperating   Storage: 0° to  60°C  (32° to  140°F )  
Shipping:  - 20° to  60°C ( - 4° to  140°F )  
Humidity      
Operating   10% to 80% (noncondensing)  
Nonoperating   Storage: 5% to 90% (noncondensing)  
Shipping: 5% to 90%(noncondensing)  
Altitude      
Operating   3,657.6 m  ( 12,000 ft ) max  
Nonoperating   12,192 m  ( 40,000 ft ) max...

USB  P orts  
l 1 upstream  -  rear   
l 4 downstream  -  2 on rear; 2 on  left  side  
Card Reader Specifications  
Overview  
l The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.   
     
l The Flash Memory Card Reader is automatically recognized by Windows ®  2000, XP and Vista.   
     
l Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.   
     
l All standard file...

   
General   
Performance    
Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display 
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If required, the 
user can select different settings, but in most cases monitor installation is automatic.  
Maintenance Guidelines    
Caring for Your Monitor...

Back to Contents Page    
 
Appendix  
 
   Safety Instructions  
   FCC Notice (U.S. Only)  
   Contacting Dell™  
CAUTION: Safety Instructions  
Read and follow these instructions when connecting and using your computer monitor:   
l To help avoid damaging your computer, be sure that the voltage selection switch on the power supply for the computer is set to match the alternating 
current (AC) power available at your location:   
 
115 volts (V)/60 hertz (Hz) in most of North and South America and some...

FCC Class B  
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturers instruction 
manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital 
device pursuant to Part 15 of the FCC Rules.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
1. This device may not cause...

Back to Contents Page    
 
Setting Up Your Monitor   
 
If you have a Dell  desktop or a Dell  portable computer with internet access  
1.  Go to   http://support.dell.com ,  enter your service tag, and download the latest driver for your graphics card.    
2.  After installing the drivers for your Graphics Adapter, attempt to set the resolution to   1920x1200  again.  
   
Back to Contents Page  NOTE:  If you are unable to set the resolution to  1920x1200,  please contact Dell ™  to inquire about a...

Back to Contents Page    
 
Setting Up Your Monitor   
 
If you have non Dell  desktop, portable computer, or graphic card  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3.  Select   Advanced .  
4.  Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).   
5.  Please refer to the graphic card provider website for updated driver (for example,   http://www.ATI.com  OR   http://www.NVIDIA.com  )....

Back to Contents Page    
 
Operating the Monitor   
 
   Using the Front Panel Controls  
   Using the On - Scree Display (OSD) Menu  
   Setting the Optimal Resolution  
   Using the Dell Soundbar (Optional)  
   Using the Tilt, Swivel and Vertical Extension  
    Rotating the Monitor  
   Adjusting the Rotating Settings of Your Operating System  
Using the Front Panel  
Use the buttons on the front of the monitor to adjust the image settings.   
   
   
A
 
Input Source Select   Use Input Source...

   
Using the OSD Menu  
1.  Push the MENU button to launch the OSD menu and display the main menu.   
Main Menu for Analog (VGA) Input  
   
    
B
 
PIP/PBP Select   Use this button to activate PIP (Picture - in - Picture)/PBP (Picture - by - PictureyfPRGHVDGMXVWPHQW 
Pressing this button continually cycles the monitor through the following modes : OFF -- >PIP -- >PBP. You will see the following messages 
corresponding to the mode selected.  
 
 
       
   
C
 
OSD Menu/Select    The Menu button is...

Or  
Main Menu for non Analog (non VGA) Input  
 
2.   Push the   and   buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table 
for a    
      complete list of all the options available for the monitor.   
3.   Push the MENU button once to activate the highlighted option.    
4.   Push   and   button to select the desired parameter.   
5.   Push MENU to enter the slide bar and then use the    and   buttons, according to the...