Dell 2408wfp Users Guide
Have a look at the manual Dell 2408wfp Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Notes, Notices, and Cautions Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, notices, and cautions, and they are used as follows: Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the caution is mandated by regulatory authority. Information in this document is subject to change without notice. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell , the DELL logo are trademarks of DellInc; Microsoft and Windows either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. Model 2408WFP December 2007 Rev. A00 About Your Monitor Product Features Identifying Parts and Controls Monitor specifications Universal Serial Bus (USB) Interface Card Reader Specifications Plug and Play Capability Maintenance Guidelines Setting Up the Monitor Attaching the Stand Connecting the Monitor Organizing the Cables Attaching the Soundbar (optional) Removing the Stand Operating the Monitor Using the Front Panel Controls Using the On - Scree Display (OSD yf Setting the Optimal Resolution Using the Dell Soundbar (Optional) Using the Tilt, Swivel and Vertical Extension Rotating the Monitor Adjusting the Rotating Settings of Your Operating System Solving Problems Troubleshooting Your Monitor Common Problems Video Problems Product Specific Problems Universal Serial Bus (USB) Specific Problems Troubleshooting the Dell™ Soundbar (Optionalyf Card Reader Troubleshooting Appendix CAUTION: Safety Instruction FCC Notice (U.S. Only) Contacting Dell™ NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates the potential for property damage, personal injury, or death.
Back to Contents Page Product Features Identifying Parts and Controls Monitor Specifications Universal Serial Bus (USB) Interface Card Reader Specifications Plug and Play Capability Maintenance Guidelines Product Features The 2408WFP flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 24 - inch (609.6 mm) viewable area display. ■ 1920 x 1200 resolution, plus full - screen support for lower resolutions. ■ Wide viewing angle to allow viewing from a sitting or standing position, or moving side - to - side. ■ Tilt, swivel, vertical extension and rotate adjustment capabilities. ■ Removable pedestal and Video Electronics Standards Association (VESA) 100 mm mounting holes for flexible mounting solutions. ■ Plug and play capability if supported by your system. ■ On - Screen Display (OSD) adjustments for ease of set - up and screen optimization. ■ Software and documentation CD includes an information file (INF), Image color Matching File (ICM), and product documentation. ■ Energy Saver feature for Energy Star compliance. ■ Security lock slot. Identifying Parts and Features Front View Front View Front panel controls Label Description 1 Input Source Select 2 Picture In Picture ( PIP )/ Picture By Picture ( PBP ) Select 3 OSD Menu/Select 4 Brightness & Contrast/ Down ( - )
Back View Side View 5 Auto - adjust/ Up (+) 6 Power button (with power light indicator) Label Description/Use 1 VESA mounting holes (100mm) (Behind attached base plate) T o mount the monitor. 2 Connectors label To indicate the positions and types of connectors. 3 Barcode serial number label T o contact Dell for technical support. 4 Security lock slot T o help secure your monitor. 5 Stand release button T o release the stand from the monitor. 6 Regulatory rating label Lists the regulatory approvals. 7 Dell Soundbar mounting brackets To attach the optional Dell Soundbar. 8 Lock down/release button Push the monitor down, press the button to unlock the monitor, and then lift the monitor to the desired height. 9 Cable management slot T o organize cables by placing them through the slot.
Bottom View Bottom view Left side Label Description 1 Card reader. See Card Reader Specifications for more information. 2 USB downstream ports Label Description 1 AC power cord connector 2 DC power connector for Dell™ Soundbar 3 DisplayPort connector 4 HDMI connector 5 DVI connector - 1 6 DVI connector - 2 7 VGA connector 8 Composite video connector 9 S - Video connector 10 Component video connectors 11 Audio out 12 USB upstream port 13 USB downstream ports
Monitor Specifications The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor. Power Management Modes If you have VESAs DPMS compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode*. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically wake up. The following table shows the power consumption and signaling of this automatic power - saving feature: Activate the computer and wake up the monitor to gain access to the OSD . Pin Assignments VGA Connector VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Normal operation Active Active Active Green 110 W (maximum)* 57 W (normal)** Active - off mode Inactive Inactive Blanked Amber Less than 2 W Switch off - - - Off Less than 1 W * With Audio and USB ** Without Audio and USB NOTE: This monitor is ENERGY STAR ® - compliant as well as TCO 99/TCO 03 power management compatible. NOTE: Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. Pin Number 15 - pin Side of the Connected Signal Cable 1 Video - Red 2 Video - Green 3 Video - Blue 4 GND 5 Self - test 6 GND - R 7 GND - G 8 GND - B 9 Computer 5V/3.3V 10 GND - sync 11 GND 12 DDC data 13 H - sync 14 V - sync 15 DDC clock
S - video Connector Composite V ideo Connector Pin Number 24 - pin Side of the Connected Signal Cable 1 TMDS RX2 - 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1 - 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5V/+3.3V power 15 Self test 16 Hot Plug Detect 17 TMDS RX0 - 18 TMDS RX0+ 19 TMDS Ground 20 Floating 21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock - Pin Number 5 - pin Side of the C o nnected Signal Cable (Cable not included) 1 GND 2 GND 3 LUMA 4 CHROMA 5 GND
Luma composite chroma Component Video Connector DisplayPort Connector Pin Number 3 - pin Side of the C onnected Signal Cable (Cable not included) 1 Y (Luminance signal) 2 Pb (Color differential signal) 3 Pr (Color differential signal) Pin Number 20 - pin Side of the Connected Signal Cable 1 ML0(p) 2 GND 3 ML0(n) 4 ML1(p) 5 GND 6 ML1(n) 7 ML2(p) 8 GND 9 ML2(n) 10 ML3(p) 11 GND 12 ML3(n) 13 GND 14 GND 15 AUX(p) 16 GND 17 AUX(n) 18 HPD 19 Re - PWR 20 PWR
HDMI Connector Pin Number 19 - pin Side of the Connected Signal Cable 1 TMDS DATA 2+ 2 TMDS DATA 2 SHIELD 3 TMDS DATA 2 - 4 TMDS DATA 1+ 5 TMDS DATA 1 SHIELD 6 TMDS DATA 1 - 7 TMDS DATA 0+ 8 TMDS DATA 0 SHIELD 9 TMDS DATA 0 - 10 TMDS CLOCK 11 TMDS CLOCK SHIELD 12 TMDS CLOCK - 13 Floating 14 Floating 15 DDC CLOCK (SDA) 16 DDC DATA (SDA) 17 GROUND 18 +5V POWER 19 HOT PLUG DETECT Flat Panel Specifications Screen type Active matrix - TFT LCD Screen dimensions 24 inches (24 - inch diagonal viewable image size) Preset display area: Horizontal 518.4 mm (20.4 inches) Vertical 324 mm (12.7 inches ) Pixel pitch 0.27 mm Viewing angle 178° (VerticalyfW\SLFDO
Resolution Horizontal scan range 30 kHz to 83 kHz (automatic) Vertical scan range 56 Hz to 75 Hz Optimal preset resolution 1920 x 1200 at 60 Hz Highest preset resolution 1920 x 1200 at 60 Hz Video Supported Modes Video display capabilities (DVI playback) 480p/576p/720p/1080p (Supports HDCP) Video display capabilities (Composite playback) NTSC/PAL Video display capabilities (S - Video playback) NTSC/PAL Video display capabilities (HDMI playback) 480i/480p/576i/576p/720p/1080i/1080p Video display capabilities (Component playback) 480i/480p/576i/576p/720p/1080i /1080p Preset Display Modes The following table lists the preset modes for which Dell guarantees image size and centering: Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) VGA, 720 x 400 31.5 70.1 28.3 - /+ VGA, 640 x 480 31.5 59.9 25.2 - / - VESA, 640 x 480 37.5 75.0 31.5 - / - VESA, 800 x 600 37.9 60.3 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 - / - VESA, 1024 x 768 60.0 75.0 78.8 +/+ VESA, 1152 x 864 67.5 75.0 108.0 +/+ VESA, 1280 x 1024 64.0 60.0 108.0 +/+ VESA, 1280 x 1024 80.0 75.0 135.0 +/+ VESA, 1600 x 1 200 75.0 60.0 162.0 +/+ VESA, 1920 x 1200 74.5 60.0 154.0 +/ - Electrical The following table lists the electrical specification: Video input signals Analog RGB, 0.7 Volts +/ - 5ybRKPLQSXWLPSHGDQFH Digital DVI - D TMDS, 600mV for each differential line, 50 ohm input impedance HDMI, 600mV for each differential line, 100 ohm input impedance per differential pair DisplayPort, 600mV for each differential line, 100 ohm input impedance per differential pair S - video, Y input 1 volt(p - p), C input 0.286 volt(p - p), 75 ohm input impedance Composite, 1 volt(p - p), 75 ohm input impedance Component: Y, Pb, Pr are all 0.5~1volt(p - p), 75 ohm input impedance Synchronization input signals separate horizontal and vertical, 3.3V CMOS or 5V TTL level, positive or negative sync. SOG (Sync on green) AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.) Inrush current 120V: 40A (Max.) 240V: 80A (Max.)
Physical Characteristics The following table lists the physical characteristics: Connector type l D - sub: blue connector l DVI - D: white connector l DisplayPort: black connector l S - video l Composite l Component l HDMI Signal cable type l D - sub: Detachable, Analog, 15pin, shipped attached to the monitor l DVI - D: Detachable, Digital, 24pin, shipped detached from the monitor l DisplayPort: Detachable, Digital, 20pin, shipped detached from the monitor l S - video l Composite l Component l HDMI NOTE: The S - video, composite, component, and HDMI cables are not included with the monitor. Dimensions (with stand) Height (Compressed) 396.8 mm ( 15.62 inches) Height ( Extended ) 496.8 mm ( 19.56 inches) Width 559.7 mm (22.04 inches) Depth 207 .6 mm ( 8.17 inches) Dimensions (without stand) Height 359.6 mm ( 14.4 inches) Width 559.7 mm (22.04 inches) Depth 87.5 mm ( 3.44 inches) Stand Dimensions Height (Compressed) 338.2 mm ( 13.31 inches) Height (Extended) 379.2 mm ( 14.93 inches) Width 432 mm ( 17.01 inches) Depth 207.6 mm ( 8.17 inches) Weight with packaging 11.7 kg ( 26.41 lb ) Weight with stand assembly and cables 9.58 kg ( 21.74 lb ) Weight without stand assembly (For wall mount or VESA mount considerations - no cables) 6.74 kg ( 15.48 lb ) Weight of stand assembly 2.16 kg ( 4.76 lb ) Environmental The following table lists the environmental limitation: Temperature