Dell 2330dn User Guide

3.  Press  the button on the base  of the imaging  drum and  pull the toner cartridge assembly up  and  out using  the handle.
4 .  Lift the base  of the imaging  drum kit  and  gently  pull it  up  and  slide it  out of the printer.
5 .  Remove the jammed  paper.
6 .  Install the toner cartridge assembly into the imaging  drum kit  by aligning  the white rollers on the toner cartridge with
the white arrows on the tracks of the imaging  drum kit  and  pushing  the toner cartridge in as far as it  will...

7.  Install the imaging  drum kit  with the toner cartridge assembly into the printer by aligning  the blue arrow guides  of the
imaging  drum kit  with the blue arrows found  in the printer and  pushing  the imaging  drum into the printer as far as it
will go.  The  imaging  drum kit  clicks  into place  when  correctly  installed.
8 .  Close  the front cover.
9 .  Turn the printer back  on.
10 . Send the print  job to  the printer again.
201 Paper Jam
There is a  paper jam  between  the printer input...

4.  Lift the base  of the imaging  drum kit  and  gently  pull it  up  and  slide it  out of the printer.
5 .  Remove the jammed  paper.
6 .  Install the toner cartridge assembly into the imaging  drum kit  by aligning  the white rollers on the toner cartridge with
the white arrows on the tracks of the imaging  drum kit  and  pushing  the toner cartridge in as far as it  will go.  The
cartridge  clicks into place  when  correctly  installed.
7 .  Install the imaging  drum kit  with the toner cartridge...

8.  Close  the front cover.
9 .  Turn the printer back  on.
10 . Send the print  job to  the printer again.
202 Paper Jam
There is a  paper jam  at the printer exit  sensor.
1.  Turn the printer off before checking the printer.
2 .  Open the rear exit.
3 .  Remove the jammed  paper.
4 .  Close  the rear exit.
5 .  Turn the printer back  on.
6 .  Send the print  job to  the printer again.
231 Paper Jam — Check Duplex
There is a  paper jam  in the rear of the duplex  paper path.
1.  Turn the printer off...

3.  Remove the jammed  paper.
4 .  Close  the rear exit.
5 .  Turn the printer back  on.
6 .  Send the print  job to  the printer again.
233 Paper Jam — Check Duplex
There is a  paper jam  in the front of the duplex  unit.
1.  Turn the printer off before checking the printer.
2 .  Remove Tray 1.
3 .  Remove the jammed  paper.
CAUTION: The  inside  of  the printer might  be  hot. To reduce the risk  of  injury from a  hot  component,
allow  the surface to cool before touching it.
 

4.  Replace Tray 1.
5 .  Turn the printer back  on.
6 .  Send the print  job to  the printer again.
234 Paper Jam — Check Duplex
There is a  paper jam  in the duplex  unit, but the printer cannot identify the location.
1.  Turn the printer off before checking the printer.
2 .  Remove Tray 1.
3 .  Remove any jammed  paper.
CAUTION: The  inside  of  the printer might  be  hot. To reduce the risk  of  injury from a  hot  component,
allow  the surface to cool before touching it.
 

4.  Replace Tray 1.
5 .  Open the rear exit.
6 .  Remove any jammed  paper.
7 .  Close  the rear exit.
8 .  Turn the printer back  on.
9 .  Send the print  job to  the printer again.
235 Paper Jam — Check Duplex
There is a  paper jam  at the output bin  because  the paper used was  too  narrow  for the duplex  unit.
1.  Turn the printer off before checking the printer.
 

2.  Open the rear exit.
3.  Remove the jammed  paper.
4 .  Close  the rear exit.
5 .  Replace the narrow  paper in Tray 1 with a  wider paper.
6 .  Turn the printer back  on.
7 .  Send the print  job to  the printer again.
24x Paper Jam — Check Tray 
Jam  in Tray 1
1.  Turn the printer off before checking the printer.
2 .  Pull Tray 1 out.
3 .  Remove the jam.
CAUTION: The  inside  of  the printer might  be  hot. To reduce the risk  of  injury from a  hot  component,
allow  the surface to cool before...

4.  Insert the tray.
5 .  Turn the printer back  on.
6 .  Send the print  job to  the printer again.
Jam  in Tray 2
1.  Turn the printer off before checking the printer.
2 .  Pull Tray 2 out.
3 .  Remove the jam.
CAUTION: The  inside  of  the printer might  be  hot. To reduce the risk  of  injury from a  hot  component,
allow  the surface to cool before touching it.
 

4.  Insert the tray.
5 .  Turn the printer back  on.
6 .  Send your  print  job to  the printer again.
251 Paper Jam — Check Multipurpose Feeder
1.  Turn the printer off before checking the printer.
2 .  Remove the paper from  the multipurpose feeder.
3 .  Flex the sheets  of paper back  and  forth to  loosen them, and  then  fan  them. Do not fold  or crease  the paper. Straighten
the edges on a  level surface.
4 .  Load the paper into the multipurpose feeder.
5 .  Slide the paper guide toward the...