Dell 2150cdn User Guide

Understanding the Printer Menus309
ColorTrack Mode
Purpose:
To specify who has access to color printing.
Va l u e s :
NoAcct User Prt
Purpose:
To specify whether to permit the printing of data without authentication information. 
Va l u e s :
Col. Tra Err Rep
Purpose:
To specify whether to automatically print error-related information if printing with 
ColorTrack results in an error.
Va l u e s :
LetterH Dup Mode
 NOTE: LetterH Dup Mode feature is available only for Dell 2150cdn Color 
Printer.
Purpose:...

310Understanding the Printer Menus
To specify whether to print on both sides when using letterhead.
Va l u e s :
Low Toner Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Va l u e s :
Maintenance
Use the Maintenance menu to initialize the NV (non-volatile) memory, 
configure the plain paper quality adjustment settings, and configure the security 
settings.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
F/W Version
Purpose:
To confirm the...

Understanding the Printer Menus311
Paper Density
Purpose:
To specify paper density settings.
Va l u e s :
Adjust BTR
 NOTE: The print quality changes depending on the setting values you select for 
this item.
Purpose:
To specify the transfer roller voltage adjustment for each paper type.
Va l u e s :
Plain Light
Normal
*
Label Light
Normal
*
 

312Understanding the Printer Menus
Adjust Fuser
 NOTE: The print quality changes depending on the setting values you select for 
this item.
Purpose:
To adjust the fuser temperature setting for each paper type.
Va l u e s :
Plain 0*Sets the transfer roller voltage in increments of 1. The 
default settings may not give the best output on all paper 
types. If you see mottles on the print output, try to increase 
the voltage. If you see white spots on the print output, try to 
decrease the voltage. -6 to +6...

Understanding the Printer Menus313
Auto Reg Adj
Purpose: 
To specify whether to automatically perform color registration adjustment.
Va l u e s :
Color Reg Adj
Purpose:
To manually perform color registration adjustment.
Plain 0*Sets the fuser temperature in increments of 1. The default 
settings may not give the best output on all paper types. 
When the printed paper has curled, try to lower the 
temperature. When the toner does not fuse on the paper 
properly, try to increase the temperature. -6 to +6...

314Understanding the Printer Menus
Manual Color Registration Adjustments are required when the printer is initially 
installed and after the printer is moved. 
 NOTE: The Color Reg Adjust feature can be configured when Auto 
Reg Adjust
 is set to Off.
Va l u e s :
 NOTE: Ensure that you remove the paper from the single sheet feeder before 
performing 
Auto Correct.
Clean Developer
Purpose:
To stir the toner in a new toner cartridge.
Va l u e s :
Auto Correct Are You Sure?Press the (Set) button to...

Understanding the Printer Menus315
Toner Refresh
Purpose:
To clean the toner in each toner cartridge.
Va l u e s :
Drum Refresh
Purpose:
To clean the surface of the PHD unit.
Va l u e s :
Reset Defaults
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and 
rebooting the printer, all the menu parameters are reset to their default values.
Va l u e s :
Init PrintMeter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the 
meter...

316Understanding the Printer Menus
Purpose:
To clear all files stored as Secure Print, Mailbox Print, Proof Print, and Stored 
Print in the RAM disk.
Va l u e s :
Non-DELL Toner
Purpose:
To use toner cartridge of another manufacturer.
 NOTICE: Using a non-Dell toner cartridge may severely damage your printer. 
The warranty does not cover damages caused by using non-Dell toner cartridges.
Va l u e s :
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed. 
The...

Understanding the Printer Menus317
Secure Settings
Use the Secure Settings menu to set a password to limit access to the 
menus. This prevents items from being changed accidentally.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
See also:
Panel Lock
Panel Lock
Purpose:
To set the limited access to Admin Menu with a password, and to set or change 
the password. 
Va l u e s :
Login Error
 NOTE: Login Error feature is available only when Panel Lock Set is set to 
Enable....

318Understanding the Printer Menus
Tray Settings
Use the Tray Settings menu to define the print media loaded in the 
standard 250-sheet tray and the optional 250-sheet feeder.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Tray 1
Purpose:
To specify the paper loaded in the standard 250-sheet tray.
Va l u e s :
Off*Does not allow an administrator to log in after one error entry attempt.
On 5Sets the number of error entry attempts allowed when an administrator 
logs in.
1-10