Dell 2150cdn User Guide

Understanding the Printer Menus299
LPD DisableDisables the LPD port.
Enable
*Enables the Line Printer Daemon (LPD) port.
Port9100 DisableDisables the Port9100 port.
Enable
*Enables the Port9100 port.
IPP DisableDisables IPP port.
Enable
*Enables IPP port.
SMB TCP/IP DisableDisables SMB TCP/IP port.
Enable
*Enables SMB TCP/IP port.
SMB NetBEUI DisableDisables SMB Net BEUI port.
Enable
*Enables SMB Net BEUI port.
WSD DisableDisables WSD port.
Enable
*Enables WSD port.
SNMP UDP DisableDisables the SNMP UDP...

300Understanding the Printer Menus
IP Filter
 NOTE: IP Filter feature is available only for LPD or Port9100.
Purpose:
To block data received from certain IP addresses through the wired or wireless 
network. You can set up to five IP addresses. The change becomes effective 
after the printer is turned off and then on again.
Va l u e s :
IEEE 802.1x
 NOTE: IEEE 802.1x feature is available only when the printer is connected using 
LAN cable and it is available only when the IEEE 802.1 authentication is...

Understanding the Printer Menus301
USB Settings
Use the USB Settings menu to change printer settings affecting a USB port.
USB Port
Purpose:
To specify whether to enable the USB port. The change becomes effective after 
the printer is turned off and then on again.
Va l u e s :
System Settings
Use System Settings to configure the power saving mode, warning tones, 
time-out duration, device display language, and job log auto print settings. 
 NOTE: Values marked by an asterisk (*) are the factory default...

302Understanding the Printer Menus
Select a high value if your printer is in constant use. In most circumstances, this 
keeps the printer ready to operate with minimum warm-up time. Select a value 
between 1 and 30 minutes for power save mode if you want a balance between 
energy consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver 
mode when it receives data from the computer. You can also change the status of 
the printer to the standby...

Understanding the Printer Menus303
Va l u e s :
Date & Time 
Purpose:
To specify the date and time formats.
Va l u e s :
Audio Tone
Purpose:
To configure settings for tones emitted by the printer during operation or when a 
warning message appears. 
Va l u e s :
OffDisables the job time-out.
On
*30sec*Sets the time the printer waits for data to arrive from the 
computer.
5–300 sec.
Set Date & Time Time ZoneSets the time zone.
Set DateSets the date.
Set TimeSets the time.
Date FormatSets the date format....

304Understanding the Printer Menus
mm / inch
Purpose:
To specify the default measurement unit displayed after the numeric value on 
the operator panel.
Va l u e s :
 NOTE: The default for mm/inch varies depending on other settings, such as 
Country and Document Size.
Def. Paper Size 
Purpose:
To specify the default paper size.
Va l u e s :
Job Completed Off Does not emit a tone when a job is complete.
On
*Emits a tone when a job is complete.
Fault Tone Off Does not emit a tone when a job ends...

Understanding the Printer Menus305
mm series
inch series
Auto Log Print
Purpose:
To automatically print a job history report after every 20 jobs.
Va l u e s :
Print logs can also be printed using the Admin Reports menu.
Print ID
Purpose:
To specify a location where the user ID is printed. 
Va l u e s :
A4*1
Letter
*1Denotes country-specific factory default values.
A4
Letter
*1
*1Denotes country-specific factory default values.
Off*Does not automatically print a job history report.
On
Automatically prints...

306Understanding the Printer Menus
 NOTE: When printing on DL size paper, a part of the user ID may not be printed 
correctly.
Print Text
Purpose:
To specify whether the printer outputs PDL data, which is not supported by the 
printer, as text when the printer receives it. Text data is printed on A4 or Letter 
size paper.
Va l u e s :
Banner Sheet
 NOTE: Banner Sheet feature is available only when the optional 250-sheet feeder 
is installed to Dell 2150cdn Color Printer.
Purpose:
To specify the position...

Understanding the Printer Menus307
Purpose:
To allocate memory to the RAM disk file system for the Secure Print, Mailbox 
Print, and Proof Print features. The change becomes effective after the printer is 
turned off and then on again.
Va l u e s :
 NOTE: Restart your printer when you change the settings for the RAM Disk 
menu.
Substitute Tray
Purpose:
Specifies whether to use paper of a different size when the paper that is loaded 
in the specified tray does not match the paper size settings for the...

308Understanding the Printer Menus
Secure Job Exp.
 NOTE: Secure Job Exp. feature is available only when RAM Disk is set to 
Enable.
Purpose:
To specify the date and time to delete the files stored as Secure Print in the RAM 
disk.
Va l u e s :
OnSets the time when printing is available.
Start Ti meSets the start time of the available time.
End TimeSets the end time of the available time.
RecurrenceSets the day of the week to repeat the setting.
Expiration Mode Off
*Does not set the date and time to...