Dell 2007fp Users Guide

 
Notes, Notices, and Cautions  
   
   
   
Information in this document is subject to change without notice.  
 
Reproduction in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  Dell , the  DELL  logo,  Inspiron ,  Dell Precision ,  Dimension ,  OptiPlex ,  Latitude, PowerEdge, PowerVault, PowerApp, and Dell OpenManage  are trademarks of 
DellInc;   Microsoft, Windows,  and  Windows   NT  are registered trademarks of Microsoft...

Back to Contents Page    
  
About Your Monitor   
 
Front View  
   
     
        
Back View  
     Front View  
   Back View  
   Side View  
   Bottom View      Monitor Specifications  
   Universal Serial Bus (USB) Interface  
   Plug and play capability  
   Caring for Your Monitor  
1 Input indicators  
2  Input Source Select  
3 OSD Menu / Select   
4 Down ( - )  
5 Up (+)    
6   Power button (with power light indicator)    

 
 
Side View  
                 
                                                           1 VESA mounting holes (100mm)  
(Behind attached base plate)   Use to mount the monitor.  
   
2  Connectors label Indicate the positions and types of connectors.
3 Barcode serial number label Refer to this label if you need to contact Dell for 
technical support.
4 Security lock slot Use a security lock with the slot to help secure your 
monitor.
5 Monitor Lock/Release Button Press to release the stand from the...

                           
                                                            Left side  
Bottom View    
 
   
Monitor Specifications  1 USB downstream ports
1 AC power cord connector  
2 DVI connector  
3 VGA connector  
4 Composite video connector  
5 S - Video connector
6 USB upstream port  
7 USB downstream ports  
8 DC power connector for Dell™ Soundbar  
General  
Model number 2007FP
Flat Panel  
Screen type Active matrix  -  TFT LCD  

Screen dimensions 20.1 inches (20.1 - inch viewable image size)
Preset display area:
Horizontal   408 mm (16.1 inches)
Vertical   306 mm (12.1 inches)
Pixel pitch 0.255 mm
Viewing angle +/ -   89° (verticalyfW\S/ -   89° (horizontalyfW\p  
Luminance output 300 cd/m  ² ( typ)  
Contrast ratio 800:1 (typ)  
Faceplate coating Antiglare with hard - coating 3H  
Backlight CCFL (6) edgelight system
Response Time 16ms typical  
Resolution  
Horizontal scan range 30 kHz to 81 kHz (automatic)
Vertical scan...

Power Management Modes  
If you have VESAs DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in 
use. This is referred to as Power Save Mode*. If activity from keyboard, mouse or other input devices is detected by the computer, the monitor will 
automatically wake up. The following table shows the power consumption and signaling of this automatic power saving feature:   
* Zero power consumption in OFF mode can only be...

VGA Connector  
 
   
 
  
Pin Number  
15 - pin Side of the Co nnected Signal Cable
1 Video - Red  
2 Video - Green
3 Video - Blue
4 GND
5 Self - test
6 GND - R
7 GND - G
8 GND - B
9 Computer 5V/3.3V  
10 GND - sync
11 GND
12 DDC data
13 H - sync
14 V - sync
15 DDC clock
 
Pin Number  
24 - pin Side of th e C o nnected  Signal Cable
1 TMDS RX2 -
2 TMDS RX2+
3 TMDS Ground
4 Floating
5 Floating
6 DDC Clock
7 DDC Data
8 Floating
9 TMDS RX1 -
10 TMDS RX1+
11 TMDS Ground
12 Floating
13 Floating  

S - video Connector   
          
Composite  V ideo Connector  
 
Universal Serial Bus (USB) Interface  
    
USB Upstream  C onnector  14 +5V / +3.3V power  
15 Self test 
16 Hot Plug Detect
17 TMDS RX0 -
18 TMDS RX0+
19 TMDS Ground
20 Floating
21 Floating
22 TMDS Ground
23 TMDS Clock+
24 TMDS Clock -
 
Pin Number  
5 - pin Side of the C o nnected  Signal 
Cable (Cable not included)
1 GND
2 GND
3 LUMA
4 CHROMA
5 GND
Pin Number 1 - p in Side of the C onnected  Signal Cable (cable not included)
1 LUMA...

   
    
USB Downstream  C onnector  
   
    
USB  P orts    
l 1 upstream  -  rear   
l 4 downstream  -  2 on rear; 2 on left side  
   
Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display 
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user 
can select different...