Dell 1355cnw User Guide

Dell Printer Configuration Web Tool169
Security 
SettingsEncryptionSelect the security method from the list.
No Security
*Specifies No Security to 
configure the wireless setting 
without specifying a security 
method from WEP, WPA-
PSK AES/WPA2-PSK AES, 
and WPA-PSK TKIP.
WEP 64 Bit 
ASCII (5 Bytes)Specifies the WEP 64 Bit 
ASCII to use through the 
wireless network.
WEP 128 Bit 
ASCII (13 Bytes)Specifies the WEP 128 Bit 
ASCII to use through the 
wireless network.
WEP 64 Bit Hex 
(10 Bytes)Specifies...

170Dell Printer Configuration Web Tool
 NOTE: This item is available only when the printer is connected with a wireless 
network.
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer. 
Va l u e s :WEP Key 4Enter the WEP key when WEP is selected from 
Encryption.
Re-enter WEP Key 4Enter the WEP key 4 again to confirm.
Tr a n s m i t  K e ySpecifies the transmit key type from the list.
Pass PhraseSpecifies the pass phrase.
Re-enter Pass PhraseEnter the pass phrase...

Dell Printer Configuration Web Tool171
TCP/IP 
SettingsHost NameSpecifies the host name.
IP ModeSpecifies the IP mode.
IPv4 IP Address ModeSelects the IP address mode.
Manual IP 
AddressManually sets the IP address.
Manual Subnet 
MaskManually sets the subnet 
mask.
Manual Gateway 
AddressManually sets the gateway 
address.
IPv6 Use Manual 
AddressTo set the IP address 
manually.
Manual AddressManually sets the IP address. 
To specify an IPv6 address, 
enter the address followed by 
a slash (/) and then...

172Dell Printer Configuration Web Tool
DNS DNS Domain 
NameSpecifies the domain name of the domain name 
server. Up to 255 alphanumeric characters, 
periods, and hyphens can be used. If you need to 
specify more than one domain name, separate 
them using a comma or semicolon.
IPv4 Get DNS Server 
Address from 
DHCPSpecifies whether to get the 
DNS server address 
automatically from the 
DHCP server.
Manual DNS 
Server AddressSets the DNS server address.
IPv6 Get DNS Server 
Address from...

Dell Printer Configuration Web Tool173
E-Mail Alert
Purpose:
To configure settings for E-Mail Alert. This page can also be displayed by 
clicking 
E-Mail Alert in the left frame.
Va l u e s :WSD Port NumberSets the port number. This must be 80 or between 
8000 and 9999.
Receive 
Ti me-OutSets the receive time-out period from 1 to 65535 
seconds.
Notification 
Delivery Time-
OutSets the notification time-out period from 1 to 60 
seconds.
Maximum 
Number of TTLSets the maximum number of TTL from 1 to 10....

174Dell Printer Configuration Web Tool
E-Mail Server 
SettingsPrimary SMTP 
GatewaySets the primary SMTP gateway.
SMTP Port 
NumberSpecifies the SMTP port number. This must be 
25, 587 or between 5000 and 65535.
E-Mail Send 
AuthenticationSpecifies the authentication method for outgoing 
e-mail.
SMTP Login 
UserSpecifies the SMTP login user. Up to 63 
alphanumeric characters, periods, hyphens, 
underscores, and at symbols (@) can be used. If 
specifying more than one address, separate them 
using...

Dell Printer Configuration Web Tool175
SNMP
Purpose:
To configure the detailed settings of SNMP.
Va l u e s :E-Mail Alert 
SettingsE-Mail List 1Sets acceptable e-mail addresses for the E-Mail 
Alert feature using up to 255 alphanumeric 
characters.
Select Alerts for 
List 1Supplies AlertsSpecifies whether to receive an 
e-mail alert for consumables.
Paper Handling 
AlertsSpecifies whether to receive an 
e-mail alert for paper handling.
Service CallSpecifies whether to receive an 
e-mail alert for service...

176Dell Printer Configuration Web Tool
Community 
NameCommunity 
Name 
(Read only)Specifies the community name to access (read 
only) data using up to 31 alphanumeric 
characters.
The original setting will remain valid if nothing is 
entered. Characters entered for community name 
in the previous settings will not be displayed on 
the screen. The default Read Community is 
public.
Re-enter 
Community 
Name (Read only)Enter the community name to access (read only) 
data again to confirm.
Community 
Name...

Dell Printer Configuration Web Tool177
Scan to PC
Purpose:
To specify the client when scanning data.
Va l u e s :Tr a p  
Notification 
1-4Trap Address TypeSelect the trap address type from the list. 
Selecting Off clears the settings in Trap Address, 
Po r t  N u m b e r, and Notify, and does not notify 
trap occurrence. Selecting IPv4 or IPv6 allows 
you to enter Trap Address.
Trap AddressSpecifies the IP address and IP socket in the 
following format:
•IPv4
Specifies the IP address and IP socket in...

178Dell Printer Configuration Web Tool
Other Features
The Other Features tab contains the Set Password and Reset Print Server pages.
Set Password
Purpose:
To set or change the password that is required to access the setup parameters 
of the printer from the 
Dell Printer Configuration Web Tool.
This page can also be displayed by clicking 
Set Password in the left frame.
Va l u e s :
 
NOTE: If you forgot your password, initialize NVM (non-volatile memory) to restore 
the password to the default (NULL)....