Dell 1355cn User Guide

Dell Printer Configuration Web Tool149
Function Enabled
Purpose:
To enable the services to be password-enabled, and allow the user to change 
it.
 NOTE: This menu sets a password to limit the Copy, Scan, Fax, and USB-Print 
services. When you change the password for the Dell Printer Configuration Web 
Tool, click Set Password you change on the left frame and set the password.
Va l u e s :
Secure Receive
Purpose:
Enables you to set a password to secure the incoming faxes. When the Secure 
Receive feature...

150Dell Printer Configuration Web Tool
Copy Defaults
Purpose:
To create your own default Copy settings.
Va l u e s :
Copy Color Balance
Purpose:
To specify the default color balance level.
Va l u e s :
Copy Settings
Purpose:
To configure the Copy settings.
Re-enter 
PasswordEnter the new password again to confirm.
ColorSelects mode for color or black and white copying.
Reduce/EnlargeSets the default copy reduction/enlargement ratio.
Custom 
Reduce/EnlargeSets a custom reduction/enlargement ratio within...

Dell Printer Configuration Web Tool151
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Va l u e s :
Scan Defaults
Purpose:
To create your own default Scan settings.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Va l u e s :Multiple-Up Off*Does not perform multiple-up printing.
AutoAutomatically reduces the original pages to fit 
onto one sheet of paper.
ID CopyPrints the original pages onto one sheet of paper in 
the original size....

152Dell Printer Configuration Web Tool
Fax Defaults
Purpose:
To create your own default Fax settings.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Va l u e s :SharpnessSets the default sharpness level.
Auto ExposureSets whether to suppress the background of the original to enhance 
text on the scanned image.
Margin 
To p / B o t t o mSets the value of the top and bottom margins within the range of 0 
mm to 50 mm/0.0 to 2.0 inch.
Margin 
Left/RightSets the value of the...

Dell Printer Configuration Web Tool153
Fax Settings
Purpose:
To configure the basic fax settings.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Va l u e s :
Receive Mode TelephoneAutomatic fax reception is turned off. You can 
receive a fax by picking up the handset of the 
external telephone, pressing the remote receive code, 
and then pressing  .
Fax *Automatically receives faxes.
Te l e p h o n e /
FaxWhen the printer receives an incoming fax, the 
external telephone...

154Dell Printer Configuration Web Tool
Auto Receive 
Answer/FaxSets the interval at which the printer goes into the fax receive 
mode after the external answering machine receives an incoming 
call.
Line MonitorSets the volume of the line monitor, which audibly monitors a 
transmission through the internal speaker until a connection is 
made.
Ring Tone 
Vo l u m eSets the volume of the ring tone, which indicates that an 
incoming call is a telephone call through the internal speaker 
when Receive Mode is...

Dell Printer Configuration Web Tool155
Printer Maintenance
The Printer Maintenance tab contains the Pa p e r  D e n s i t y, Adjust BTR, Adjust 
Fuser
, Auto Registration Adjustment, Color Registration Adjustment, Clean 
Developer
, Adjust Altitude, Reset Defaults, Non-Dell Toner, Clock Settings, and 
Web Link Customization pages.
Paper Density
Purpose:
To specify the paper density.
Va l u e s :Prefix DialSpecifies whether to set a prefix dial number.
Prefix Dial 
NumberSets a prefix dial number of up to...

156Dell Printer Configuration Web Tool
Adjust BTR
Purpose:
To specify the optimum voltage settings for printing for the transfer roller 
(BTR). To lower the voltage, set negative values. To increase, set positive 
values.
The default settings may not give the best output on all paper types. If you 
see mottles on the print output, try to increase the voltage. If you see white 
spots on the print output, try to decrease the voltage.
 NOTE: The print quality changes depending on the values you select for...

Dell Printer Configuration Web Tool157
The default settings may not give the best output on all paper types. When 
the printed paper has curled, try to lower the temperature. When the toner 
does not fuse on the paper properly, try to increase the temperature.
 NOTE: The print quality changes depending on the values you select for this item.
Va l u e s :
Auto Registration Adjustment
Purpose:
To specify whether to automatically adjust color registration.
Color Registration Adjustment
Purpose:
To...

158Dell Printer Configuration Web Tool
To rotate the developer motor and stir the toner in the toner cartridge, to use 
up a toner cartridge when you need to replace it before the end of its life, or to 
stir the toner in a new toner cartridge.
Va l u e s :
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed. 
The discharge phenomenon for charging the photo conductor varies with 
barometric pressure. Adjustments are performed by specifying the altitude of 
the...