DELL 1350cnw User Manual

Connecting Your Printer37
 

38Connecting Your Printer
 

Setting the IP Address39
6
Setting the IP Address
Assigning an IP Address (for IPv4 mode)
 NOTE: When you assign an IP address manually in IPv6 mode, use the Dell Printer 
Configuration Web Tool . To open the Dell Printer Configuration Web Tool , use the 
link local address. To check a link local  address, see Printing and Checking the 
Printer Settings Page on page 42.
An IP address is a unique number that  consists of four sections that are 
delimited by a period and can include up  to three digits in...

40Setting the IP Address
5Press the   button until TCP/IP appears, and then press the   button.
6Press the   button until IPv4 appears, and then press the   button.
7Ensure that  Get IP Address appears, and then press the   button.
8Ensure that Panel appears, and then press the   button.
9Press the   button and ensure that Get IP Address appears.
10Press the   button until IP Address appears, and then press the   
button.
The cursor is located at the  first digit of the IP address.
11Press the   or...

Setting the IP Address41
24Turn off and turn on the printer.
The Tool Box
 NOTE: 
 NOTE: When you use IPv6 Mode for network printing, the Tool Box cannot be used 
to assign an IP address.
1Click Start All Programs Dell Printers Dell 1350cnw Color 
Printer
 Tool Box.
 NOTE: The  Select Printer  dialog box opens in this step, when multiple printer 
drivers are installed on your computer . In this case, click the name of Dell 
1350cnw Color Printer  listed in Printer Name, and then click  OK.
The Tool...

42Setting the IP Address
2Look under the TCP/IP heading on the printer settings page to ensure 
that the IP address, subnet mask, and gateway are appropriate.
To verify if the printer is active on  the network, run the ping command in 
your computer:
1
Go to MS DOS Prompt.
2Ty p e  cmd, and then press the OK.
3On the black window that appears, type ping xx.xx.xx.xx (where 
xx.xx.xx.xx is the IP address of your printer).
4Reply from the IP address denotes printer is active on the network.
Printing and...

Setting the IP Address43
3Select Reports from the list at the left side of the page. 
The 
Reports page is displayed. 
4Click the Printer Settings button.
The printer settings page is printed.
If the IP address is  0.0.0.0 (the factory default) or  169.254.xx.xx, an 
IP address has not been assigned. To assign an IP address for your printer, see 
Assigning an IP Address (f or IPv4 mode) on page 39.
 

44Setting the IP Address
 

Loading Paper45
7
Loading Paper
 NOTE: To avoid paper jams, do not remove the priority sheet inserter while a 
printing is in progress.
 
NOTE: Use only laser print media. Do not use ink jet paper in your printer.
 
NOTE: For printing envelopes, see Loading Print Media on page 165.
Loading Print Media in the Multipurpose Feeder 
(MPF)
1Open the front cover by pulling out the instruction sheet.
2Pull the priority sheet inserter (PSI) out.
3Remove the instruction sh eet attached to the PSI with adhesive...

46Loading Paper
 NOTE: Before you use the PSI, ensure that you to read the instruction sheet.
4Pull the length guide forward until it stops.
5Pull the MPF extension forward until it stops.
6Adjust the paper width guides to their maximum width.