Dell 1350cnw User Guide

Dell Printer Configuration Web Tool127
Printer Settings
The Printer Settings  tab contains the  System Settings, USB Settings, and 
Secure Settings  pages.
System Settings
Purpose:
To configure the basic printer settings.
Va l u e s :
Printer Settings Click the Start button to print the printer settings page.
Device Settings Click the Start button to print the device settings page.
Job History Click the Start button to print the Job History report.
Error History Click the Start button to print the Error...

128Dell Printer Configuration Web Tool
USB Settings
Purpose:
To change the USB settings on your printer.
Va l u e s :
Secure Settings
Pa n e l  L o c k
Purpose:
To restrict access to Admin Menu and Report/List  with a password, and 
to set or change the password.
Va l u e s :
*1 Enter 5 in  Sleep to put the printer in the Sleep mode five minutes after it finishes a 
job. This uses less energy, but requires more  warm-up time for the printer. Enter 5 if 
your printer shares an electrical circuit with room...

Dell Printer Configuration Web Tool129
 NOTE: This menu sets a password to lock the operator panel. When you change 
the password for the  Dell Printer Configuration Web Tool, click Set Password  on the 
left frame and set the password.
Login Error
Purpose:
To set the maximum number of failed lo gin attempts before an administrator 
is denied access to  Admin Menu and Report/List .
 NOTE: This item is available only when  Panel Lock Set is set to Enable.
Printer Maintenance
The Printer Maintenance  tab...

130Dell Printer Configuration Web Tool
Va l u e s :
Adjust Fuser
Purpose:
To specify the optimum temperature settings for printing for the fuser. To 
lower the temperature, set negative values. To increase, set positive values.
The default settings may not give the be st output on all paper types. When 
the printed paper has curled, try to lo wer the temperature. When the toner 
does not fuse on the paper properly , try to increase the temperature.
 NOTE: The print quality changes depending on the values...

Dell Printer Configuration Web Tool131
Auto Registration Adjustment
Purpose:
To specify whether to automatically adjust color registration.
Color Registration Adjustments
Purpose:
To specify whether to manually adjust color registration.
Color registration adjustments need to be  made during the initial setup of the 
printer or when the printer is  moved to a different location.
 NOTE: The Color Registration Adjustments  feature can be configured when  Auto 
Registration Adjustment  is set to Off.
Va l u...

132Dell Printer Configuration Web Tool
Clean Developer
Purpose:
To rotate the developer motor and stir the toner in the toner cartridge, to use 
up a toner cartridge when you need to replace it before the end of its life, or to 
stir the toner in a new toner cartridge.
Va l u e s :
BTR Refresh
Purpose:
To specify whether to automatically execute counter measures for curling/
separating discharge of the paper.
Maintenance Chart
Purpose:
To print various charts that can be  used for diagnosing your...

Dell Printer Configuration Web Tool133
Reset Defaults
Purpose:
To initialize NVM (non-volatile memory) for system parameters. After 
executing this function and rebooting the printer, all the menu parameters, 
except the parameters for the network,  are reset to their default values.
Va l u e s :
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
 NOTE: Using non-Dell-brand toner cartridges may make some printer features 
unusable, reduce print quality and decrease the reliability of...

134Dell Printer Configuration Web Tool
The discharge phenomenon for charging the photo conductor varies with 
barometric pressure. Adjustments are performed by specifying the altitude of 
the location where the printer is being used.
 NOTE: An incorrect altitude adjustment sett ing leads to poor printing quality, 
incorrect indication of remaining toner.
Web Link Customization
Purpose:
To specify a link used for ordering co nsumables, which can be accessed from 
Order Supplies at:  in the left frame.
Va...

Dell Printer Configuration Web Tool135
Va l u e s :
Ethernet*1Ethernet 
SettingsDisplays the current settings of Ethernet 
transmission rate and the duplex settings.
Current 
Ethernet 
Settings Displays the current Ethernet settings.
MAC Address Displays the Media Access Control (MAC) 
address of the printer.
Wireless 
Settings
*2Wireless LAN Displays whether to enable wireless connection.
SSID Displays the name that identifies the network.
Network Type Displays the network type from either the Ad-Hoc...

136Dell Printer Configuration Web Tool
TCP/IP 
SettingsIP Mode
Displays the IP mode.
Host Name Displays the host name.
IPv4
*3IP Address Mode Displays the IP address mode.
IP Address Displays the IP address.
Subnet Mask Displays the subnet mask.
Gateway Address Displays the gateway address.
IPv6
*4Enable Stateless 
Address Displays whether to enable the 
stateless address.
Use Manual 
Address Displays whether to set the IP 
address manually.
Manual 
Address
*5Displays the IP address.
Stateless Address...