Dell 1320 C Manual

   
back to contents page    

back to contents page  
Understanding Tool Box Menus   
   
The Tool Box allows you to view or specify the printer settings. You can also diagnose the printer settings by using the Tool Box.  
   
The Tool Box consists of the  Printer Settings Report ,  Printer Maintenance , and  Diagnosis  tabs.  
   Printer Settings Report  
   Printer Maintenance  
   Diagnosis  
Printer Settings Report  
   
The  Printer  Settings Report  tab includes the  Printer Information ,  Menu Settings ,  Reports , and  TCP/IP...

Values:  
 
Reports  
    System Settings   Power Saver Timer 
Mode 1   Displays the amount of time before the printer enters the Power Saver Timer Mode 1 (sleep mode) after a 
print job is complete.  
Power Saver Timer 
Mode 2   Displays the amount of time before the printer enters the Power Saver Timer Mode 2 (deep sleep mode) 
when the times specified in Power Saver Timer Mode 1 and Power Saver Timer Mode 2 elapses after a print 
job is complete.  
Control Panel Tone   Display whether the printer...

Purpose:  
   
To print various types of reports and lists.  
   
The reports are printed in the paper size specified in Printer Settings. The default is A4 or Letter.  
   
Values:  
 
TCP/IP Settings  
   
Purpose:  
   
To display the current settings of TCP/IP (Transmission Control Protocol/Internet Protocol) protocol.  
   
Values:  
 
Printer Maintenance  
   
The  Printer Maintenance  tab includes the  System Settings ,  Paper Density ,  Adjust BTR ,  Adjust Fuser ,  Registration Adjustment ,...

Paper Density  
   
Purpose:  
   
To specify the paper density.  
    Power Saver 
Timer Mode 2 *1
  5 - 60 min   Specifies the amount of time before the printer enters the Power Saver Timer Mode 2 (deep sleep mode) when 
the times specified in Power Saver Timer Mode 1 and Power Saver Timer Mode 2 elapses after a print job is 
complete.  
10 min*  
Alert Tone   Control Panel 
Tone   Off*   Does not sound an alert when you press a button on the panel.  
On   Sounds an alert when you press a button on the...

   
Values:  
 
Adjust BTR  
   
Purpose:  
   
To specify the reference voltage settings for the transfer roller.  
   
Values:  
 
Adjust Fuser  
   
Purpose:  
    Plain   Normal*  
Light  
Label   Normal*  
Light  
Apply New Settings   After you complete the settings, press the  Apply New Settings  button to apply the changes.  
Restart printer to apply new settings   Press the  Restart printer to apply the new settings  button to apply the changes.  
NOTE:  The print quality changes depending on the...

   
To specify the temperature settings value for the fuser.  
   
Values:  
 
Registration Adjustment  
   
Purpose:  
   
To print the color registration chart and to adjust the color registration by using the chart. This function is required after the printer is set up or moved.  
   
Values:  
  Plain   - 2 - 2   Sets the temperature settings for the fuser for plain paper.  
0*  
Plain Thick   - 2 - 2   Sets the temperature settings for the fuser for thick plain paper.  
0*  
Covers   - 2 - 2   Sets...

Adjust Altitude  
   
Purpose:  
   
To adjust the height of the location to install the printer.  
   
Values:  
 
Reset Defaults  
   
Purpose:  
   
To initialize the non - volatile memory (NVM). After executing this function to automatically restart the printer, all the menu parameters are reset to their default 
values.  
   
Values:  
 
Non - Dell Toner  
   
When Non - Dell toner is used, the printer may be severely damaged and may not be covered by your warranty.  
   
Purpose:  
   
To specify...

Initialize PrintMeter  
   
Purpose:  
   
To initialize the data for the print meter. After executing this function to automatically restart the printer, the value of the meter resets to 0.   
   
Values:  
 
Web Link Customization  
   
Purpose:  
   
To configure the link used for ordering supplies.  
   
Values:  
 
TCP/IP Settings  
   
Purpose:  
   
To specify the TCP/IP settings for the network.  
   
Values:  
  Non - Dell Toner   Off*   Disables the use of refilled toner cartridges.  
On...

EWS (Embedded Web Server or Dell Printer Configuration Web Tool)  
   
Purpose:  
   
To print the server settings for the  Dell Printer Configuration Web Tool .  
 
Set Password  
   
Purpose:  
   
To set a password to limit access to the menus.  
   
Values:  
 
Diagnosis  
   
The  Diagnosis  tab includes the  Chart Print ,  Machine Check ,  Paper Wrinkle Check Mode ,  Environment Sensor Info ,  Developer Stir Mode , and  Refresh 
Mode  pages.  
Chart Print  
   
Purpose:  
   
To print the chart...