Dell 1135n User Guide

Features of your new product
Your  new machine is equipped  with a  number of special features that  improve  the quality of the documents you print.
Special Features
Print with excellent quality and speed
You  can  print  with a  resolution of up  to  1200 x  1200 dpi  effective  output.
Your  machine prints A4-sized paper at up  to  22 ppm and letter -sized paper at up  to  23 ppm.
Handle many different types of printable material
Manual  tray  supports  plain paper in various sizes, letterhead,...

Scan  in color  and  use the precise compressions of JPEG, TIFF, and  PDF  formats.
Quickly  scan  and  send files  to  multiple destinations using  Networks scanning  (See For  network
connected machine).
Set a specific time to transmit a Fax
You  can  specify a  certain  time to  transmit the fax and  also  send the fax to  several  stored
destinations.
After the transmission, the machine may print  out the fax reports  according to  the setting.
IPv6
This machine supports  IPv6.
Features by Model
The...

Getting started
This chapter gives  you step-by-step instructions for setting  up  the USB  connected machine and  software.
This chapter includes:
Setting  up  the hardware
Supplied software
System  requirements
Installing USB  connected machine’s  driver
Sharing your  machine locally
Supported optional  devices and  features may differ according to  your  model.  Please  check  your  model name.
(See Features  by Model
).
Setting up the hardware
This section shows  the steps to  set  up  the hardware,...

5. Load paper (See Loading  paper in the tray).
6. Make sure  that  all cables are connected to  the machine.
7. Turn the machine on.
This equipment  will be inoperable  when  mains  power fails.
Supplied software
After you have  set  up  your  machine and  connected it  to  your  computer, you must  install the printer software using  the
supplied  CD. The  software CD provides  you with the following software.
OS Contents
Windows
Printer driver: Use  this  driver  to  take  full advantage  of your...

Windows® 7 Intel® Pentium®  IV  1 GHz 32 -bit or 64 -bit processor  orhigher 1 GB (2  GB) 16  GB
Support for Direct® 9 graphics with 128 MB  memory (to enable the Aero theme).
DVD-R/W Drive
Windows Server®
2008 R2 Intel® Pentium®  IV  1 GHz (x86)  or 1.4 GHz (x64)  processors
(2  GHz or faster) 512 MB  (2048
MB)10  GB
Internet  Explorer®  5.0 or higher  is the minimum requirement  for all Windows operating  systems.
Administrator rights are required  to  install the software.
Windows Terminal Services...

The  software CD should automatically run  and  an installation window  should appear.
If  the installation window  does  not appear,  click  Start and  then   Run.  Type  X:\ Setup.exe ,  replacing “X”
with the letter  which represents your  CD/DVD drive. Click   OK.
If  you use Windows Vista,  Windows 7, or Windows 2008 Server R2 click   Start > All programs  >
Accessories  > Run .
Type  X:\ Setup.exe  replacing “X”  with the letter  which represents your  CD/DVD drive  and  click   OK.
If  the...

If  your  machine is not connected to  the computer, the following window  will appear.
After connecting  the machine,  click  Next.
If  you don’t  want  to  connect the printer at this time,  click  Next,  and  No  on the following screen. The
installation starts  and  a  test page  will not print  at the end  of the installation.
The  installation window  in this user  guide may differ depending on the machine and  interface in use.
5. After the installation is finished,  a  window  asking you to...

driver  name > Maintenance .
3. Select the option as you wish,  follow  the instruction on the window.
Macintosh
The  software CD provides  the driver  files  that  allow you to  use the CUPS driver  for printing on a  Macintosh
computer.
Also, it  provides  you with the TWAIN driver  for scanning  on a  Macintosh  computer.
1. Make sure  that  the machine is connected to  your  computer  and  powered on.
2. Insert the supplied  software CD into your  CD/DVD drive.
3. Double -click  the CD-ROM icon that...

Linux  computer  easily  in UI based management tool.
1. Make sure  that  the machine is connected to  your  computer  and  powered on.
2. When  the Administrator Login  window  appears,  type in root in the  Login field and  enter the system  password.
You  must  log  in as a  super user  (root)  to  install the machine software.  If  you are not a  super user, ask your
system  administrator.
3. Insert the supplied  software CD into your  CD/DVD drive.
The  software CD will run  automatically.
If  the...