Dell 1130n User Guide

12. Click  Add on the  Printer List .
For  Mac OS X  10.5~10.6, click  the “ +” icon; a  display  window  will pop  up.
13. For  Mac OS X  10.3, select the  IP  Printing tab.
For  Mac OS X10.4, click   IP  Printer.
For  Mac OS X  10.5~10.6, click   IP.
14. Select  Socket/HP Jet  Direct  in Printer Type .
When  printing a  document containing  many pages, printing performance  may be enhanced  by choosing
Socket for Printer Type  option.
15. Enter  the machine’s  IP  address in the  Printer Address...

7. 
8. When  the add  printer is done, click  Finish.
IPv6 Configuration
TCP/IPv6  is supported properly  only  in Windows Vista or higher.
If  the IPv6  network seems not working,  set  all the network setting  to  the factory defaults and  try again.  (See
Restoring  factory default settings .)
To use the IPv6  network environment, follow  the next procedure to  use the IPv6  address:
The  machine is provided  with IPv6  feature  on.
1. Connect your  machine to  the network with a  network cable.
2....

3. Enter  the IPv6  addresses. (ex:  http://[FE80::215:99FF:FE66:7701])
Address must  be enclosed in []  brackets.
 

Basic setup
After installation is complete,  you may want  to  set  the machine’s  default settings. Refer to  the next section if you would
like to  set  or change  values. This chapter gives  you step-by-step instructions for setting  up  the machine.
This chapter includes:
Altitude adjustment
Setting  the default tray  and  paper
Changing font setting  (Dell 1130n only)
Altitude adjustment
The  print  quality is affected by atmospheric  pressure, which is determined by the height of the machine above...

In the computer
Windows
1. Click  the Windows Start menu.
2. For  Windows 2000, select  Settings > Printers .
For  Windows XP/Server 2003, select  Printer and Faxes.
For  Windows Server 2008/Vista,  select  Control  Panel > Hardware  and Sound   > Printers .
For  Windows 7, select  Control  Panel > Hardware  and Sound   > Devices and Printers .
For  Windows Server 2008 R2,  select  Control  Panel > Hardware   > Devices and Printers .
3. Right-click  your  machine.
4. For  Windows XP/Server 2003/Server...

Your  machine has  preset font setting  depending on your  region or country.
If  you want  to  change  the font or set  the font for special condition,  such as the DOS environment, you can  change  the
font setting  as follows:
1. Ensure  that  you have  installed  the printer driver  with the provided  software CD.
2. If  you are a  Windows user, you can  launch it  from  the Start menu,  select  Programs or All Programs  > Dell  >
Dell  Printers  > your printer driver  name  > Printer Settings...

Media and tray
This chapter provides  information  on how to  load  print  media into your  machine.
This chapter includes:
Selecting  print  media
Changing the tray  size
Loading  paper in the tray
Printing  on special media
Using the output support
Selecting print media
You  can  print  on a  variety of print  media,  such as plain paper, envelopes, labels,  and  transparencies. Always use print
media that  meet the guidelines for use with your  machine.
Guidelines to select the print media
Print media...

1. Support guide
2. Paper  length guide
3. Guide lock
4. Paper  width guide
1. With one  hand press  and  hold the guide lock,  and  with the other hand,  hold the paper length guide and  support
guide together. Slide the paper length guide and  support guide to  locate them  in the correct paper size slot.
2. Flex or fan  the edge  of the paper stack to  separate  the pages before loading papers.  Insert the paper into the tray.
3. After inserting paper into the tray, adjust  the support guide so that...

Do not use a  paper with more  than  6
Loading paper in the tray
Tray 1
1. Pull out the paper tray  .  And  adjust  the tray  size to  the media size you are loading. (See Changing the tray  size.)
2. Flex or fan  the edge  of the paper stack to  separate  the pages before loading papers.
3. And  place  paper with the side  you want  to  print  facing  down.
4. Set  the paper type and  size for the traySetting  the default tray  and  paper .)
If  you experience problems with paper feeding, check  whether...

Do not force  the paper beyond  the surface with mark  when  loading.
When  printing the special media,  you must  follow  the loading guideline. (See Printing  on special
media.)
When  papers overlap when  printing using  manual tray, open tray  1 and  remove overlapping papers
then  try printing again.
When  paper does  not feed well while  printing, push the paper in manually until it  starts  feeding
automatically.
2. Squeeze  the manual tray  paper guides  and  adjust  them  to  the width of the...