DELL 1110 User Manual

							   
 
If you have stored the overlay file you want to use on an external source, such as a CD or floppy disk, you can also load the file from that source when 
you access this Load Overlay window.   
After you select the file, click  Open . The file is now shown in the  Overlay List  box and is available for printing. Select the overlay from the  Overlay List  
box.   
   
6. If necessary,  select  Confirm Page Overlay When Printing   checkbox. When this box is checked, a message window appears each time you submit a 
document for printing, asking you to confirm that you want to print an overlay on your document.   
Answering  Yes  to the window means that the selected overlay will be printed with your document. Answering  No  to the window cancels the use of the 
overlay page.   
If this box is empty and an overlay has been selected, the overlay will be printed automatically with your document.   
7. Click  OK  or  Yes  until printing starts.   
 
The overlay is downloaded with your print job and printed on your document.   
   
Deleting a Page Overlay  
  You can delete page overlays that are no longer used.   
1. In the printer properties window, click the  Extras  tab.   
 
2. Click  Edit  in the  Overlay  section.   
 
3. Select the overlay you want to delete from the  Overlay List  box.   
 
4. Click  Delete Overlay .   
 
5. When a confirmation message window appears, click  Yes .  
 
6. Click  OK  until you exit the Print window.    
   
   
Setting Up a Locally Shared Printer   
You can connect the printer directly to a selected computer, called the host computer, on a network using a USB cable. Your printer can be shared by other 
users on the network through a Windows 98, Me, 2000, or XP network printer connection. Before you can share your printer, you must first set up a Microsoft 
Windows network.  
   
In Windows 98/Me  
Setting Up the Host Computer  
1. Start Windows.  
 
2. Click the  Start  button, select  Control Panel , and double - click the  Network  icon.  
 
3. Click the  File and Print Sharing  box, check the box next to  I want to be able to allow others to print to my printer , and click  OK .  
 
4. Click  Start  and select  Printers  from  Settings . Double - click your printer name.    
						

							 
5. Click  Properties  in the Printer menu.  
 
6. Click the  Sharing  tab and check the  Shared As  box. Fill in the  Share Name  field and then click  OK .  
 
 
Setting Up the Client Computer  
1. Right - click the  Start  button and select  Explore .   
 
2. Open your network folder in the left column.   
 
3. Right - click the shared name and click  Capture Printer Port .   
 
4. Select the port you want, check the  Reconnect at log on  box, and then click  OK .  
 
5. Click the  Start  button and select  Settings  and then  Printers .  
 
6. Double - click your printer icon.  
 
7. Click the  Printer  menu and point to  Properties .  
 
8. Click the  Details  tab, select the printer port, and then click  OK .    
     
In Windows 2000/XP  
Setting Up the Host Computer  
1. Start Windows.   
 
2. For Windows 2000, click the  Start  button    Settings   Printers .    
For Windows XP, click the  Start  button and select  Printers and Faxes .   
3. Double - click your printer icon.   
 
4. Click the  Printer  menu and select  Sharing .   
 
5. For Windows 2000, check the  Shared As  box.   
For Windows XP, check the  Share this printer  box.   
6. Fill in the  Share Name  field and click  OK .   
 
 
Setting Up the Client Computer  
1. Right - click the  Start  button and select  Explore .   
 
2. Open your network folder in the left column.   
 
3. Click the shared name. If you cant find the shared name, make sure that the user account for the client computer is registered on the host computer.   
 
4. For Windows 2000, from the  Start  button, click  Settings  and select  Printers .    
For Windows XP,   from the  Start  button, click and select  Printers and Faxes .  
5. Double - click your printer icon.   
 
6. Click the  Printer  menu and select  Properties .   
 
7. Click the  Ports  tab and select  Add Port .   
 
8. Click  Local Port  and select  New Port .   
 
9. Fill in the  Enter a port name  field and enter the shared name.   
 
10. Click  OK  and select  Close .   
 
11. Click  Apply  and select  OK .  
 
   
						

							Software Overview  
After setting up your printer and connecting it to your computer, you must install the drivers and utilities from the  Drivers and Utilities  CD included with your 
printer. If you purchased a Dell™ computer and your printer at the same time, the drivers and utilities are automatically installed. You don't need to install 
them. The  Drivers and Utilities  CD contains the following:  
   
l Dell Printer Driver –   allows your computer to communicate with your printer. To use your printer as a printer in Windows, you must install the printer 
driver. For information about installing the printer driver in Windows, see  Installing Software .  
 
     
l Dell   Toner Management System   –   displays the status of the printer and the name of the job when you send a job to print. The Dell   Toner Management 
System   window also displays the level of toner remaining and allows you to order replacement toner cartridges.   
 
     
l Users Guide –   HTML documentation provides detailed information about using your printer.  
 
   
Installing Software    
Before you begin, ensure that your system meets the minimum requirements.  
 
System Requirements  
   
Installing Dell Software  
   
A printer driver is software that lets your computer communicate with your printer. The procedure to install drivers depends on the operating system you are 
using.  
1. Make sure that the printer is connected to your computer and powered on. Close all unnecessary programs.   
 
 
2. Insert the  Drivers and Utilities  CD.  
 
   
 
 
3. If necessary,  select a language by pressing the  Language  button on the main screen.  
 
4. Select  Typical Installation  to install the  Users Guide , the printer driver, and Dell Toner Management System   as the default settings.  
 NOTE:  For Windows 2000/XP, the system administrator should install Dell software. 
Item Requirements  
Operating System   Windows 98/Me/2000/XP  
CPU   Windows 98/Me/2000 Pentium II 400 Mhz or higher
Windows XP Pentium III 933 Mhz or higher
RAM   Windows 98/Me/2000 64 MB or higher
Windows XP 128 MB or higher
Free Disk Space   Windows 98/Me/2000 300 MB or higher
Windows XP 1 GB or higher
Internet Explorer   5.0 or higher  
NOTE:  If you attach a USB printer cable while your printer and computer are powered on, the Windows hardware wizard launches immediately. Cancel 
the screen and use the  Drivers and Utilities  CD to install the Dell software.
NOTE:  If the printer is not connected to your computer when you install the CD - ROM, the No Printer Found screen appears. Follow the 
instructions to install the software.  
						

							To choose an individual component to install, select  Custom Installation . You can also change the destination folder.    
5. When the installation has been completed, you may print a test page. Click  Finish  to complete the installation and close the wizard. You are now ready 
to print.  
 
   
Uninstalling Software    
You should remove the printer driver  if you are upgrading the software or if your driver installation fails . You can remove the software using the  Drivers and 
Utilities  CD or the Windows uninstall.  
1. From the  Start  menu, select  Programs     Dell Printers    Dell Laser Printer 1110    Dell Printer Software uninstall .   
 
   
 
 
2. Select the software you want to remove and click  Next .  
 
The selected driver and all of its components are removed from your computer.    
3. Click  Finish .  
 
   
Using the Dell   Toner Management System  
   
Printing Status Window  
The Printing Status window displays the status of the printer (Printer Ready, Printer Offline, and Error - Check Printer), the name of the job currently being 
printed, and the toner level for your printer.   
  The Printing Status window launches when you send a print job to the printer. This appears only on the computer screen.    
 
   
Dell Toner Reorder Program  
The Dell Toner Reorder Program window can be launched from the Printing Status window, the Programs window, or the desktop icon.  
You can order toner by phone or from the Web. For details, see  Ordering Supplies .  
   
    NOTE:  Close all programs before uninstalling software.  
						

							Specifications   
     
   
Printer Specifications  
 
   
Paper Specifications  
 
Overview  
   
Your printer accepts a variety of print materials, such as cut - sheet paper (including up to 100 percent recycled - fiber content paper), envelopes, labels, 
transparencies, and custom - sized paper. Properties, such as weight, composition, grain, and moisture content, are important factors affecting the printers 
performance and the output quality. Paper that does not meet the guidelines outlined in this  Users Guide  can cause the following problems:  
   
l Poor print quality  
 
     
l Increased paper jams  
 
     
l Premature wear on the printer  
 
     Printer Specifications  
   Paper Specifications  
Item   Specifications and Description  
Print Speed   Up to 16 ppm in A4 (17 ppm in Letter)  
Resolution   600 x 600 dpi  
First Printing Time   10 seconds  
Warm - up Time   30 seconds  
Power Rating   AC 110~127 V (USA, Canada) / 220~240 V (Others), 50 / 60 Hz  
Power Consumption   300 W average during operation / Less than 6 W in sleep mode  
Acoustic Noise   Stand by: Less than 30 dB;  
Printing: Less than 50 dB;  
Sleep mode: Background noise  
Toner Supply   Single cartridge  
Toner Cartridge Life   Ships with 1,000 - page starter toner cartridge at ISO 19752 5% coverage (2,000 pages for a standard toner cartridge)  
Duty Cycle   Monthly: Up to 8,000 pages  
Weight   5.5 Kg (including Toner Cartridge)  
Package Weight   Paper: 1.2 Kg  
Plastic: 0.2 Kg  
External Dimensions  
(W x D x H)   358 x 299 x 217 mm / 14.1 x 11.8 x 8.5 in.  
Operating Environment   Temperature:10~32 ° C / 50~90 ° F; Humidity: 20~80% RH  
Emulation   GDI  
Random Access Memory (RAM)   2 MB (non expandable)  
Fonts   Windows fonts  
Interface   USB 1.1 (Compatible with USB 2.0)  
OS Compatibility   Windows 98/Me/2000/XP  
NOTE:  Some paper may meet all of the guidelines in this guide and still not produce satisfactory results. This may be the result of improper handling, 
unacceptable temperature and humidity levels, or other variables over which Dell has no control.
NOTE:  Before purchasing large quantities of paper, insure the paper meets the requirements specified in this  Users Guide .
  CAUTION:  Using paper that does not meet these specifications may cause problems, requiring  repairs. These repairs are not covered by the Dell 
warranty or service agreements.    
						

							Supported Sizes of Paper   
a.   The printer supports a wide range of media sizes.    
b.   Capacity may vary depending on print materials weight and thickness, and environmental conditions.    
   
   
Guidelines for Using Paper  
  For best results, use conventional 75 g/m ²   ( 20 lb) paper. Ensure that the paper is of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, 
wrinkles, voids, and curled or bent edges.  
   
If you are unsure of what type of paper you are loading, such as bond or recycled paper , check the label on the package.  Paper  
Dimensions a  
Weight  
Capacity b  
Plain Paper  
Letter      
8.5 x 11 in.  
(216 x 279 mm)  
   
• 60 to 90 g/m ² ond   
(16 to 24 lb) for the paper tray
• 60 to 163 g/m ²   bond(16 to 43 lb) for   
manual feed mode   • 150 sheets of 75 g/m ²   bond (20 lb) 
paper for the paper tray
• 1 sheet of paper for manual feed mode  A4   8.27 x 11.7 in.  
(210 x 297 mm)  
A5   5.83 x 8.27 in.  
(148 x 210 mm)  
Executive   7.25 x 10.5 in.  
(184.2 x 266.7 mm)  
Legal   8.5 x 14 in.  
(215.9 x 355.6 mm)  
JIS B5   7.17 x 10.1 in.  
(182 x 257 mm)  
ISO B5   6.93 x 9.84 in.  
(176 x 250 mm)  
A6   4.13 x 5.85 in.  
(105 x 148.5 mm)  
Oficio 8.50  x  13.50 in.  
(216  x  343 mm)
US Folio   8.5 x 13 in.  
(216 x 330 mm)  
Envelopes  
No.10      
4.12 x 9.5 in.  
(105 x 241mm)  
75 to 90 g/m ²   bond   
(20 to 24 lb) for   
manual feed mode  
1 sheet of paper for manual feed mode  DL   4.33 x 8.66 in.  
(110 x 220 mm)  
C5   6.38 x 9.01 in.  
(162 x 229 mm)  
C6   4.5 x 6.4in.  
(114 x 162 mm)  
Monarch   3.875 x 7.5in.  
(98.4 x 190.5 mm)  
Labels  
Letter      
8.5 x 11 in.  
(216 x 279 mm)   120 to 150 g/m ²   bond  
A4   8.3 x 11.7 in.  
(210 x 297 mm)  
Transparencies  
Letter      
8.5 x 11 in.  
(216 x 279 mm)   138 to 146 g/m ²   bond  
A4   8.3 x 11.7 in.  
(210 x 297 mm)  
Card Stocks  
Post Card      
4 x 6 in.  
(101.6 x 152.4 mm)   90 to 163 g/m ²   bond    
(16 to 43 lb) for manual feed mode  
Minimum Size (custom)   3 x 5 in.  
(76 x 127 mm)  
60 to 120 g/m ²   bond  
(16 to 32 lb) for manual feed mode  
Maximum Size (Legal)   8.5 x 14 in.  
(216 x 356 mm)  
NOTE:  You may experience jams when using print materials with a length of less than 127 mm (5 inches). For optimum performance, ensure that you 
are storing and handling the paper correctly. Please refer to  Printer and Paper Storage Environment .  
						

							   
The following problems may cause print quality deviations, jamming, or even damage to the printer:  
 
   
Paper Specifications   
   
Paper Output Capacity   
     
Printer and Paper Storage Environment  
  Paper storage conditions directly affect the feed operation.  
  Ideally, the printer and paper storage environment should be at or near room temperature, and not too dry or humid. Remember that paper is hygroscopic: it 
absorbs and loses moisture rapidly.    
  Heat works with humidity to damage paper. Heat causes the moisture in paper to evaporate, while cold causes it to condense on the sheets. Heating 
systems and air conditioners remove most of the humidity from a room. As paper is opened and used, it loses moisture, causing streaks and smudging. Humid 
weather or water coolers can cause the humidity to increase in a room. As paper is opened and used it absorbs any excess moisture, causing light print and 
dropouts. Also, as paper loses and gains moisture it can become distorted. This can cause paper jams.
  Care should be taken not to purchase more paper than can be used in a short time (about 3 months). Paper stored for long periods may experience heat and 
moisture extremes, which can cause damage. Planning is important to prevent damage to large supplies of paper.  
   
Unopened paper in sealed reams can remain stable for several months before use. Opened packages of paper have more potential for environment damage, 
especially if they are not wrapped with a moisture - proof barrier.  
   
The paper storage environment should be properly maintained to ensure optimum performance. The required condition is 20 C to 24 C (68 F to 75 F), with a 
relative humidity of 4 percent to 55 percent. The following guidelines should be considered when evaluating the papers storage environment:  
   
l Paper should be stored at or near room temperature.  
 
     
l The air should not be too dry or too humid.  
 
     Symptom   Problem with Paper   Solution  
Poor print quality or toner adhesion, problems 
with feeding   Too moist, too rough, too smooth, or embossed; 
faulty paper lot   Try another kind of paper, between 100 - 400 
Sheffield, 4%~5% moisture content.  
Dropout, jamming, curl   Stored improperly   Store paper flat in its moisture - proof wrapping.  
Increased gray background shading/printer 
wear   Too heavy   Use lighter paper; use the rear output slot.  
Excessive curl problems with feeding   Too moist, wrong grain direction, or short - grain 
construction   • Use the rear output slot.
• Use long - grain paper.
Jamming, damage to printer   Cutouts or perforations   Do not use paper with cutouts or perforations.  
Problems with feeding   Ragged edges   Use good quality paper.  
NOTE:  Do not use letterhead paper printed with low - temperature inks, such as those used in some types of thermography.
NOTE:  Do not use raised or embossed letterhead.
NOTE:  The printer uses heat and pressure to fuse toner to the paper. Insure that any colored paper or preprinted forms use inks that are compatible 
with this fusing temperature (200 C or 392 F for 0.1 second).
Category   Specifications  
Acid Content   5.5~8.0 pH  
Caliper   0.094~0.18 mm (3.0~7.0 mils)  
Curl in Ream   Flat within 0.02 in (5 mm)  
Cut Edge Conditions   Cut with sharp blades with no visible fray.  
Fusing Compatibility   Must not scorch, melt, offset, or release hazardous emissions when heated to 200 C (392 F) for 0.1 second.  
Grain   Long Grain  
Moisture Content   4%~6% by weight  
Smoothness   100~250 Sheffield  
Output Location   Capacity  
Paper Output Tray (Face Down)   100 sheets of 75 g/m ²   bond (20 lb) paper    
						

							l The best way to store an opened ream of paper is to rewrap it tightly in its moisture - proof wrapping. If the printer environment is subject to extremes, 
unwrap only the amount of paper to be used during the days operation to prevent unwanted moisture changes.  
 
     
						

							Dell   Laser Printer 1110 Users Guide  
   
Click the links to the left for information on the features, options, and operation of your printer. For information on other documentation included with your 
printer, see  Finding Information .  
   
To order replacement toner cartridges or supplies from Dell:  
1. Double - click the Dell Toner Reorder Program icon on your desktop.
 
 
   
 
OR    
2. Visit Dells website, or order Dell printer supplies by phone.  
 
www.dell.com/supplies  
   
Notes, Notices, and Cautions  
   
      NOTE:  A  NOTE  indicates important information that helps you make better use of your printer.
  NOTICE:  A  NOTICE  indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
  CAUTION:  A CAUTION indicates a potential for property damage, personal injury, or death.  
-----------------------------------------------------------------  
Information in this document is subject to change without notice.   
2005 Dell Inc.. All rights reserved.    
   
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.  
   
Trademarks used in this text:  Dell,   DELL  logo, and  Dell Toner Management System  are trademarks of Dell 
Inc.;  Microsoft  and  Windows  are registered trademarks of Microsoft Corporation.   
   
Adobe is a registered trademark of Adobe Systems Incorporated.  
   
Other trademarks and trade names may be used in this document to refer to either the entities claiming 
the marks or the names of their products. Dell Inc. disclaims any proprietary interest in trademarks and 
trade names other than its own.  
-----------------------------------------------------------------  
Model Dell 1110  
Mar 2006           SRV  XG041           Rev. A00  
						

							Troubleshooting   
   
   
Clearing Jams in the Paper Tray    
Occasionally, paper jams during a print job. Some causes could be:  
   
l The tray is overfilled.  
 
     
l The front cover or top cover has been opened during a print job.  
 
     
l The adjustable paper guides are not properly positioned.  
 
     
l Paper that does not meet paper specifications has been used. See  Paper Specifications .  
 
     
l Paper that is outside of the supported size range has been used. See  Paper Specifications .  
 
   
If a paper jam occurs,    on the operator panel lights red. Find and remove the jammed paper.  If you cannot see it,  look inside the printer.    
To avoid tearing the paper, pull the jammed paper out gently and slowly. Follow the steps below to clear the jam.  
   
Paper Feed Jam  
1. Remove any misfed paper by pulling it out by its visible edge. Make sure that all of the paper is properly aligned in the tray.  
 
   
 
 
2. Open and close the front or top cover to resume printing the document from failed pages.    
   
Paper Exit Jam  
1. If the paper jams as it exits to the output tray and a long portion of the paper is visible,  pull the paper straight out.  
Open and close the front or top cover to resume printing.  
    Clearing Jams in the Paper Tray 
   Understanding the Operator Panel LEDs 
   Troubleshooting Checklist 
   Solving General Printing Problems 
   Solving Print Quality Problems
NOTE:  Paper jams in this area may result in loose toner on the page. If you get any toner on your clothes, wash them in cold water as hot water will 
set the toner into the fabric.