DELL 1110 User Manual

							Unpacking Your Printer  
 
1. Select a location for your printer.  
 
l Leave enough room to open the printer tray, covers, doors, and options. It is also  important to allow enough space around the printer for proper 
ventilation.    
 
l Provide the proper environment:    
 
l A firm, level surface  
 
l Away from the direct airflow of air conditioners, heaters, or ventilators  
 
l Away from sunlight, extreme humidity, or wide fluctuations in temperature  
 
l A clean, dry, and dust - free location   
 
2. In addition to the  Dell Laser Printer 1110 , ensure that you have the following items in the box. If there is a missing item, contact Dell:    
 
 
a.   The appearance of the power cord may differ according to your countrys specifications.    
b.   The  Drivers and Utilities  CD contains the Dell printer driver, Dell™ Toner Management System, and an HTML User's Guide.    
3. Save the carton and packing material in case the printer needs to be repacked.  
 
4. Remove the packing tape from the  printer.  
 
 
   
 
 
About Your Printer    
These are the main components of your printer. The following illustrations show the standard Dell Laser Printer 1110:  
   
Front View    NOTE:  Leave the printer in the box until you are ready to set it up.
   
Starter Toner 
Cartridge       
Power Cord a
     
Drivers and Utilities  
CD b
   
   
Owners Manual    
Setup Diagram  
  NOTE:  The power cord must be plugged into a grounded power socket.  
						

							   
   
    
Rear View  
   
   
   
   
Operator Panel Button Functions  
The operator panel on the top right side of your printer has two LEDs and one button.    
 
LEDs  
   
Button  LED   Description  
    The operator panel LEDs signify different things, depending on their sequence. LEDs that are off, on, and/or blinking indicate printer 
conditions, such as printer status, intervention (for example, out of paper and jammed paper), or service. For more information on what the 
LEDs sequence means and what you can do, see Understanding the Operator Panel LEDs.  
Item   Description    
						

							   
Installing the Starter Toner Cartridge   
1. Open the front cover.  
 
 
   
 
2. Unpack the starter toner cartridge from its package and thoroughly shake the  cartridge from side - to - side 5 or 6 times to distribute the toner evenly 
inside the cartridge.  
 
   
Thoroughly rolling the cartridge will assure maximum copies per cartridge.  
2.
 
3. Pull the tape to remove the protective paper.  
 
 
 
 
4. Locate the cartridge slots inside the printer, one on each side.  
 
 To print a demo page  
In Ready mode, press and hold    for  2 seconds until both LEDs blink slowly, and release.   
Manual feeding  
Press    each time you load a sheet of paper in the tray, when you select  Manual Feed  for  Source  from your software 
application.  
For detailed information, see  Using Manual Feed Mode .  
To cancel a print job  
Press    during printing.     blinks red while the print job is cleared from both the printer and the computer, and the printer 
then returns to Ready mode. This may take some time depending on the size of the print job.   
In Manual Feed mode, you cant cancel the print job by pressing  .  
Manual Duplex feeding  
Press    each time you load the paper back in the tray after the first side of your job has printed while manual duplex printing.  
For detailed information, see  Printing on Both Sides of Paper (Manual Duplex) .  
  NOTE:  If toner comes into contact with your clothing,  wipe the toner off with a dry cloth and wash your clothing in cold water. Hot water 
sets toner into fabric.
  CAUTION :  To prevent damage to the toner cartridge, do not expose the toner cartridge to light for more than a few minutes.
  CAUTION :  Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area.    
						

							   
 
 
5. Unfold the toner cartridge handle and grasp it. Insert the cartridge into the printer until it snaps into place.  
 
 
   
 
 
6. Close the front cover. Make sure that the cover is securely closed. If the cover is not firmly closed, printing errors may occur.  
 
   
Loading Paper  
Load up to 150 sheets of plain paper in the paper tray.  
   
   
To load paper:  
1. Open the paper input tray. Pull on the length and width guides to extend the tray.  
 
 
   
 
 
2. Flex the sheets back and forth to loosen them, and then fan them out. Do not fold or crease the print media. Align the edges on a level surface.  
 
 
   
 
 
3. Load the paper stack in the paper tray  with the side to be printed on facing up .  
 
    NOTE:  When printing text at 5% coverage, you can expect a toner cartridge life of approximately 1,000 pages for the starter toner 
cartridge that is shipped with the printer (2,000 pages for a standard toner cartridge).
NOTE:  To print a document, set the paper type and size in your software application after loading paper into the paper tray. See  Paper Tab .  
						

							 
Make sure that all four corners are flat in the tray.  
4. Be careful not to overload the paper tray. Overloading may cause paper jams.  
 
5. Squeeze the length guide and slide it until it lightly touches the end of the paper stack.  
Squeeze the width guide and move it toward the stack of paper until it lightly touches the side of the stack.   
 
 
   
 
   
Connecting a Printer Cable  
   To print from your computer, you need to connect your printer to your computer with a Universal Serial Bus (USB) cable. USB cables are sold separately. 
Contact Dell to purchase a USB cable.   
   
To connect the printer to a computer:  
1. Make sure the printer, computer, and any other attached devices are powered off and unplugged.  
 
2. Connect a USB cable to the USB cable connector on your printer  
 
 
 
   
 
 
3. Insert the other end of the cable into an available USB port on the computer. Do not use the USB keyboard port.    
   
Powering On the Printer   NOTE:  Improper adjustment of paper guides can result in paper jams.    
   
  NOTE:  Connecting the printer to the USB port of the computer requires a certified USB cable. You will need to buy a USB 1.1 compliant cable that 
is 3 m or less in length.  
						

							   
To power on the printer:  
1. Plug one end of the power cord into the power cord connector at the back of the printer and the other end into a properly grounded outlet.   
 
2. Press the power switch to power on the printer.  
 
 
 
   
Printing a Demo Page    
Print a demo page to make sure that the printer is operating correctly.  
1. Wait approximately 30 seconds for the printer to warm up, then press and hold    on the operator panel for  2 seconds to print a demo page.  
 
 
   
 
 
2. The Demo page shows the printers current configuration.  
 
 
   
 
 
   
   
   
      CAUTION:  The fusing area at the rear part of the inside of your printer becomes hot once the  printer is powered on. Be careful not to be burned 
when you access this area.  
  CAUTION:  Do not disassemble the printer when it is powered on. If  you do, you may receive an electric shock.    
						

							Finding Information  
    What Are You Looking For?   Find It Here  
•   Drivers for my printer
•   My Users Guide Drivers and Utilities  CD    
   
You can use the  Drivers and Utilities  CD to install/uninstall/reinstall drivers and utilities or to access your  Users Guide . 
For details, see  Software Overview .  
Readme files may be included on your  Drivers and Utilities  CD to provide last - minute updates about technical changes 
to your printer or advanced technical reference material for experienced users or technicians.   
•   Safety information
•   How to use my printer
•   Warranty information Owners Manual    
 
  CAUTION:  Read and follow all safety instructions in your  Owners Manual prior to setting up and operating 
your  printer.  
How to set up my printer   Setup Diagram   
 
Express Service Code   Express Service Code   
   
Identify your printer when you use  support.dell.com  or contact technical support.  
Enter the Express Service Code to direct your call when contacting technical support. The Express Service Code is not 
available in all countries.  
•   Latest drivers for my printer
•   Answers to technical service and 
support questions
•   Documentation for my printer  Dell Support Website  
The Dell Support Website provides several online tools, including:  
You can access Dell Support at  support.dell.com . Select your region on the WELCOME TO DELL SUPPORT page, and 
fill in the requested details to access help tools and information.  •   Solutions -   Troubleshooting hints and tips, articles from technicians, and online courses 
•   Upgrades -   Upgrade information for components, such as memory
•   Customer Care -   Contact information, order status, warranty, and repair information
•   Downloads -   Drivers
•   Reference -   Printer documentation and product specifications     
						

							Maintenance   
     
   
 
Cleaning Your Printer  
  To maintain print quality, follow the cleaning procedures below, each time the toner cartridge is replaced or  if print quality problems occur .  
   
Cleaning the Exterior  
  Clean the printer cabinet with a soft, damp, and lint - free cloth. Do not let water drip onto the printer or inside the printer.  
   
Cleaning the Interior  
  Paper, toner, and dust particles can accumulate inside the printer and cause print quality problems, such as smearing or toner specks. Clean inside the printer 
to prevent these problems.  
1. Power the printer off and unplug the power cord. Wait approximately 10 minutes for the printer to cool down.  
 
2. Open the front cover.  
 
   
 
 
3. Gently pull the toner cartridge out, being careful not to scratch against the printer, and lift it up and away from the printer. Set it on a clean flat surface.  
 
   
 
4. With a dry and lint - free cloth, wipe away any dust and spilled toner from the toner cartridge area and the toner cartridge cavity.  
    Cleaning Your Printer
   Maintaining the Toner Cartridge 
   Ordering Supplies
NOTE:  Do not touch the transfer roller located under the toner cartridge when cleaning inside the printer. Oil from your fingers may cause print quality 
problems.
  CAUTION:  Cleaning solvents that contain alcohol or other strong substances may discolor or  crack the printer cabinet.  
  CAUTION:  To prevent damage to the toner cartridge, do not expose the toner cartridge to light for more than a few minutes.
  CAUTION:  Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area.  
						

							   
 
5. Reinsert the toner cartridge and close the front cover.  
 
6. Plug in the power cord and power the printer on.    
   
 
Maintaining the Toner Cartridge  
     
Storing the Toner Cartridge  
Store the toner cartridge in the original packaging until you are ready to install it.  
   
Do not store the toner cartridge in:   
   
l Temperatures greater than 40°C (104°Fyf  
 
     
l An environment with extreme changes in humidity or temperature  
 
     
l Direct sunlight  
 
     
l Dusty places  
 
     
l A car for a long period of time  
 
     
l An environment where corrosive gases are present  
 
     
l An environment with salty air  
 
   
Saving Toner  
   
To save toner, enable the Toner Save mode in the printer properties window. For details, see  Graphics Tab . Selecting this option will extend the life of the 
toner cartridge and reduce your cost per page, but will reduce print quality.  
   
Viewing Toner Levels   
   
You can check the level of toner remaining in the toner cartridge in the Printing Status window each time you send a print job to the printer. If you are having 
print quality problems, this can help you determine if the problem is caused by low toner.  
   
In the Printing Status window, you will see how much toner is remaining.  
    CAUTION:  Do not touch the transfer roller inside the printer. Oil from your fingers may cause print quality problems.  
						

							   
   
Redistributing Toner  
   
When the toner cartridge is near the end of its life, white streaks or light printing occur.    on the printers operator panel lights orange. Thoroughly shake 
the toner cartridge from side - to - side 5 or 6 times to distribute the toner evenly and temporarily improve print quality.  
1. Open the front cover.  
 
   
 
2. Gently pull the toner cartridge out, being careful not to scratch against printer, and lift it up and away from the printer. Thoroughly shake the cartridge 5 
or 6 times to distribute the toner evenly inside the cartridge.  
 
   
 
 
 
3. Reinstall the cartridge and close the front cover.  
 
     
Replacing the Toner Cartridge  
   
When the toner eventually runs out, only blank pages print. At this stage, the toner cartridge needs to be replaced.   
   
Order an extra toner cartridge so you will have it on hand when the current cartridge no longer prints satisfactorily. See  Ordering Supplies  for information on 
ordering toner cartridges.   
   
To replace the toner cartridge:  
1. Open the front cover.  
  NOTE:  If toner comes into contact with your clothing,  wipe the toner off with a dry cloth and wash your clothing in cold water. Hot water sets toner 
into fabric.
  CAUTION:  Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area.
  CAUTION:  For best results, use Dell toner cartridges. Print quality and printer reliability are not  guaranteed if you do not use Dell supplies.