Land Rover Defender 90 110 Workshop Book 1 Rover

Lubrication nipples 
(hubs, ball joints, 
etc.) ~~. ., - ßP Castrol  Duckhams  Esso  Mobil- Fina  Shell Marfak Energrease LM Grease LU 10 Multi- grease  MP  Marson Ketinax A All purpose L2 pumosc HTL 2 Grease 
Cooling system 
Anti
-freeze  Universal Anti-freeze 
See  under  Anti-freeze  section 09. 
RECOMMENDED LUBRICANTS  AND FLUIDS 
Service instructions for temperate climates - ambient temperature range -10°C to 35°C 
COMPONENTS BP I CASTROL PETROFINA I SHELL I TEXACÖ~ DUCKHAiMS 
Duckhams 15W/S0...

COMPONENTS I BP 
retention clips Door lock striker 
Windscreen 
washers H 
All Seasons  Screen Washer  Fluid  ~~ 
Door 
locks 
(anti-burst) 
Inertia  reels  ~ 
~~ ~ 
- 
~~~~ 
DO NOT LUBRICATE. These 
components  are life  lubricated  at the  manufacturing  stage 
API  service 
levcls SE or SF or SEICC or SFICC or SEICD or SFKD or the CCMC 
requirements  API 
service  levels 
CC or CD or SEICC or SE/CD or SFICC or SFICC or the CCMC 
requirements 
09 I RECOMMENDED LUBRICANTS, FLUIDSAND CAPACITIES...

RECOMMENDED LUBRICANTS, FLUIDS AND CAPACITIES 109 I 
- . !.. 
:.. .!, 
.I I, .. .. I. ....... I. . 
. _. .... .. .. ..... .. I .., .... :. : ....... 
. (. . ....... ., ..,? , . .... ..... 
ANTI-FREEZE 
Use  only UNIVERSAL  Anti-freeze or an  Ethylene  Glycol based  anti-freeze,  containing no methanol, with 
non-Phosphate  corrosion inhibitors suitable  for use  in cast  iron  and aluminium  alloy engines  to ensure  protection of 
the cooling  system against  frost and corrosion. 
Percentage 
Engine...

MAINTENANCE I 10 I 
MAINTENANCE SCHEDULES 
Revised Maintenance  Schedules are introduced  with the commencement  of the Land Rover  Ninety V8 model range. 
The  new  schedules  also apply  to four
-cylinder,  petrol and diesel  models,  and  feature  a reduced  10.000 km 
(6,000  miles)  service. The new  schedules  supersede  previous issues. 
Efficient  maintenance  is one 
of the  biggest  factors in ensuring  continuing  reliability  and efficiency. For  this  reason 
the  following  detailed...

El MAINTENANCE 
Every  Every 1O.ooO km 20.000 km (6.000 miles) (12.000 miles) or 6 months or I2 months 
0 Renew fuel filter  element (Diesel) - 60 
Every  Every IO.o(K) km 2O.ooO km (6.000 miles) ~12.ooO miles) or 6 months br 12 months 
61 
62 
0 Cleardadjust spark  plugs 
63 
0 Renew  spark plugs 
64 
0 Renew air  cleaner elements 
65 
66 
24,001) ml Renew  engine breather  filter (V8) 
67 0 Clean engine  breather  filter (all models 
except 
V8) 
Checkladjust valve  clearance (all models 
except V8) 
0...

MAINTENANCE Gi 
,;:,,.::.>, T LUBRICATION a;,-;;. :? . ., ... . . .. 
This first part of the maintenance  section  covers 
renewal 
of lubricating  oils for the  major  units  of the 
vehicle  and other  components  that require lubrication, 
as  detailed 
in the ‘Maintenance  schedules’. Refer to the 
‘General  specification  data’ for  capacities  and 
recommended  lubricants. 
Vehicles  operating  under  severe conditions  of dust, 
sand, mud  and water should  have  the oils changed and 
lubrication...

1x1 MAINTENANCE 
Renew oil filter - 2.25 petrol  and diesel engine 
RENEW MAIN AND TRANSFER  GEARBOX OILS 
DRAIN 
AND REFILL LT77mm MAIN  GEARBOX 
4
-cylinder engines 
@ 8. Place  oil tray  under  engine. 
9.  Unscrew  filter retaining bolt. 
10.  Remove  the container. 
11. Remove the element. 
12.  Discard  the used  filter  element and  large  rubber 
washer. 
13. Wash the container  in kerosene. 
14.  Place  the new  filter  element  in the  container  and 
reassemble  the unit,  using  the new...

MAINTENANCE 110 I 
DRAIN AND  RENEW  230R  AND  230T TRANSFER 
GEARBOX 
(4-cylinder engine) 
1. Drive  the vehicle  to level  ground  and place a 
container  under the  gearbox to catch the old oil. 
2. Remove  the  drain  plug and allow  the oil to drain. 
Fit  the  plug  using  a new  washer, 
if necessary,  and 
tighten  to the correct  torque. 
3.  Remove  the  filler
-level plug and  inject  the 
approximate quantity 
of the  recommended  oil until 
it  begins  to run  from  the plug  hole.  Fit the...

El MAINTENANCE 
RENEW SWIVEL  PIN HOUSING OIL 
1. Drive  the vehicle to level ground  and  place a 
container  under  each  swivel housing  to  catch  the 
used 
oil. 
2. Remove  the  drain  plug and allow  the oil to drain 
completely and  clean and refit  the plugs. 
3. Remove  the oil  filler-level  plug and  inject  the 
recommended  make  and  grade 
of oil  until  oil 
begins  to run  from  the level  hole.  Clean  and fit the 
level plugs  and wipe  away  any surplus  oil. 
LUBRICATE  PROPELLER...

MAINTENANCE I 10 I 
L7Xp :. 
..:? Diesel engine 
TOP
-UP 
BRAKE  VACUUM  PUMP OIL - 2.25 litre 
TOP-UP CARBURETTER  PISTON DAMPER - V8 
only . .. . ..-I 1.1, 
1. Slacken the drive  belt,  and  the pump  pivot bolts 1. Unscrew  the  cap on top  of both  suction  chambers 
and  withdraw  the damper. 
2. Move  the  pump to an upright  position  and 2. Top-up the reservoir  with engine  oil to within 
12 mm (0.5 in)  from  the top  of the  hollow  piston 
rod.  Refit 
the damper  and secure  the cap. 
and...