Daewoo Fr 291 Service Manual
Have a look at the manual Daewoo Fr 291 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 51 Daewoo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 9. FAN MOTOR FR – 291 MODEL DAI-6122-DESFD TYPE SHADED POLE RATING 230V/50HZ INPUT 5.0W POLE 2 POLE RPM 2000 ± 150 rpm 10. R-THERMOSTAT FR – 291 MODEL GNF-175D-01F(1) RATING AC 250V/60Hz ON/OFF TEMP. 2.5 ± 2.5 ℃ 11. DOOR SWITCH FR – 291 TYPE 1 BUTTON 2 PIN RATING AC 250V/0.5A MODEL WDS 001C-01 12. CONTL BOX HEATER FR – 291 RATING AC 220V / 4W RESISTANCE 12100 Ω
13 NO PART CODE PA R T N A M E Q’TY REAMRK 1 3010815700 CABINET URT AS 1 2 3011755200 DOOR S/W AS 1 WDS001C-01 3 3012924600 HINGE *T AS 1 4 3016000301 SPECIAL BOLT 3 M5 x L14 5 3001400000 COVER *T HI 1 PP 6 3012924500 HINGE *M AS 1 7 3016004000 SPECIAL BOLT 2 M6 x L10 8 3012924700 HINGE *U AS 1 9 7650602511 BOLT HEX 2 M6 x L25 10 3012105300 FOOT ADJ AS 2 PP+INSERT 11 3001400200 COVER FAN A 1 HIPS 12 3013412000 KNOB F CONTL 1 HIPS-c 13 4017Z42312 FAN 1 ABS ID3.17 Ø100 14 3001400600 COVER SCREW 2 HIPS 15 7112401211 SCREW TAPPING 4 T1TRS 4x12 MFZN 16 3018921800 LOUVER F 1 PP-c 17 3015917200 MOTOR F AS 1 230V/50Hz 18 3012024600 FIXTURE MOTOR A 1 PP 19 7122401211 SCREW TAPPING 2 T2TRS 4x12 20 3017062000 EVA SAS 1 21 3014120100 PAD EVA *L 1 F-PS 22 3014120200 PAD EVA *R 1 F-PS 23 3017202500 FUSE TEMP AS 1 105T,AC250V/10A 24 3018128700 SWITCH BIMETAL 1 PST-3SW- 25 4016N03280 CLAMP CABLE 3 NYLON-66, W3.6xL146 26 3012820200 HEATER SHEATH SAS 1 AC 220V, 175W 27 3010549100 BOX CONTL 1 HIPS 28 3013358100 INSU R DUCT *T 1 F-PS 29 3013358200 INSU R DUCT *U 1 F-PS 30 3018128310 SWITCH TIMER 1 220V/50Hz, 12HR 31 3018304900 THERMOSTAT 1 32 3013412100 KNOB R CONTL 1 HIPS 33 3017906700 SOCKET R LAMP AS 1 220V/15W 34 7112401011 SCREW TAPPING 2 T1TRS 4x10 MFZN
14 35 3015511000 WINDOW R 1 GPPS 36 3011187300 CASE ICING 1 PP 37 3017843700 SHELF F 1 GPPS 38 3017843600 SHELF R 2 GPPS 39 3001400700 COVER VEGETB CASE 1 GPPS 40 3011187600 CASE VEGETB 1 GPPS 41 3019027900 POCKET F 2 GPPS 42 3012319500 GASKET F DR AS 1 PVC-S+MAGNET 43 3011766900 DOOR F URT AS 1 44 3011187200 CASE EGG 1 PP 45 3019027800 POCKET EGG 1 GPPS 46 3019028200 POCKET UTILITY 1 GPPS 47 3019028000 POCKET JUMBO 1 GPPS 48 3019028100 POCKET R 1 GPPS 49 3012319600 GASKET R DR AS 1 PVC-S+MAGNET 50 3011767000 DOOR R URT AS 1 51 3956158K50 COMPRESSOR 1 YX58LHP5 52 4019H09030 SPECIAL WASHER 2 SK-5, T0.8 53 3010103400 ABSORBER WASHER 4 NR H=40 54 3010342100 BASE COMP SAS 1 GI, T1.0 55 3001400400 COVER HOUSING 1 HIPS(n) 56 3016404700 CAPACITOR RUNNING 1 400VAC, 4㎌, CLASS C 57 3816100110 CLAMP BAND RELAY 1 58 3018130300 SWITCH P RELAY AS 1 4TM129SHBYY-52 59 3811400503 COVER RELAY 1 PP 60 3011348011 CORD POWER AS 1 61 3013225100 HOSE DRN A 1 PP 62 3011187400 CASE VAPORI 1 PP 63 3016808200 DRYER AS 1 XH-9, 10g 64 3016003300 SPECIAL BOLT 2 M6.5x20 65 7650601511 BOLT HEX 2 M6x15 66 3017843500 SHELF CHILLED CASE 1 GPPS 67 3011112011 CASE CHILLED 1 GPPS
15 9. Methods of exchanging main parts. 1. F LOUVER PART - Remove the screw cap, and unscrew the fixing screw(2EA). - Pull the louver forward, grasping at the fan cover and upper corner of louver. - Disassemble fan motor harness and remove Louver As.. - Unscrew the fixing screw at the back of louver(hidden under Al tape). - To remove the fan cover, pull the bottom of fan cover.
16 2. EVAPORATOR PART - Pull the suction pipe and capi. Tube forward, with care not to bend the pipes sharply. - Hold up evaporator and pull it forward. - Remove the evaporator pad. - To remove defrost heater, cut the clamp cable first, disassemble the harness then pull down the heater. - The assembling procedure of new heater is the reverse of disassemble steps.
17 - To exchange the Bi-Metal, first cut the clamp cable then disassemble the harness. - Extract the Temp. Fuse in the evaporator then disassemble the harness . - The new Temp. Fuse should be located in the same position in the evaporator. 3. CONTROL BOX PART - To remove the temperature control dail, Pull it down.
18 - Unscrew the fixing screw(1EA) . - Pull down the control box, then disassemble the harness. - Remove the lamp cover with screwdriver etc. pushing the front hooker part of the cover then lift up the cover. - Unscrew the fixing screw of the lamp socket.
19
- Pull the lamp forward, then disassemble the
connector.
- The assembling procedure of new lamp is
the reverse of disassemble steps.
4. DOOR SWITCH PART
- In removing the door switch, push the door
switch left, insert a pointed rods as screw-
driver in the right gap, and push the rod left
and pull the door switch forward.
- Be careful not to harm the surface of cabinet
. (Use name plate etc. under the pointed rod)
- Pull the door switch forward and remove the
harness.
- In inserting new door switch, insert the left
part of the switch in the hole then push the
right part of refrigerator.