Home > Daewoo > Television > Daewoo Dtf 2950 Service Manual

Daewoo Dtf 2950 Service Manual

Here you can view all the pages of manual Daewoo Dtf 2950 Service Manual. The Daewoo manuals for Television are available online for free. You can easily download all the documents as PDF.

Page 21

CP-850FX Service Manual 
 
Europe R&D 
20 23  IR  IN  Remote control signal input 
24  INT  IN  Interrupt input from audio processor 
25 n.c.   
26 n.c.   
27 n.c.   
28 n.c.   
29 VSS IN Ground (0V) 
30 VDD3.3 IN Input/Output 3.3V 
31 n.c.   
32 n.c.   
33  RESET  IN  A low level on this pin resets the device. 
34  XTAL2  OUT  Output of the inverting oscillator amplifier 
35  XTAL1  IN  Input of the inverting oscillator amplifier 
36  VSSA  IN  Ground for analog components 
37  VDDA2.5  IN  Supply...

Page 22

CP-850FX Service Manual 
 
Europe R&D 
21 4.2  VSP94x5B (version C4)– OPTIMUS Color Decoder and Scan-Rate Converter
  
The VSPB family supports 15/32kHz systems and is available with different options. VSP 94x5B 
has one channel only. 
 
4.2.1  BLOCK DIAGRAM OF THE VSP94x5B 
 
 

Page 23

CP-850FX Service Manual 
 
Europe R&D 
22 4.2.2 Feature Overview 
-  Different application modes 
z  FSM : Frame based high performance master with PIP 
z  SSC : Split screen (Double Window) 
-  Data acquisition connectivity 
z  Up to seven (VSP 9425B/9427B: nine) CVBS inputs, up to two Y/C inputs 
z  Up to three CVBS outputs (even when Y/C input) 
z  ITU-R 656 compatible digital input 
z  RGB/FBL or YUV or YUV-H-V input 
z  9 bit amplitude resolution for CVBS/Y/C A/D converter 
z  8 bit amplitude...

Page 24

CP-850FX Service Manual 
 
Europe R&D 
23 z  2D and 3D frames for master and slave channel 
z  Vertical chrominance shift for improved VCR picture quality 
z  Contrast, brightness and saturation control 
- Sharpness improvement 
z  Digital color transition improvement (DCTI) 
z  Adaptive horizontal and vertical peaking (luminance) 
z  Digital luminance transition improvement (DLTI) 
z  Digital contrast improvement (DCI, master channel only) 
-  Three D/A converters 
-  9 bit amplitude resolution for YUV,...

Page 25

CP-850FX Service Manual 
 
Europe R&D 
24 33  VSSD4  S  Supply voltage for digital (0 V digital) 
34  VDDD4  S  Supply voltage for digital 1.8 V digital 
35  VDDAFBL  S  Supply voltage for FBL (1.8 V) 
36  VSSAFBL  S  Supply voltage for FBL (0 V) 
37  FBL1  I  Fast Blank input 1 (H1) (Analog input) 
38  FBL2  I  Fast Blank input 2 (H2) (Analog input) 
39  RIN1  I  R or V in1 (Analog input) 
40  GIN1  I  G or Y in1 (Analog input) 
41  BIN1  I  B of U in1 (Analog input) 
42  VDDARGB  S  Supply voltage for...

Page 26

CP-850FX Service Manual 
 
Europe R&D 
25 4.3  DDP 3315C – DISPLAY AND DEFLECTION PROCESSOR
 
 
The DDP 3315C is a mixed-signal single-chip digital display and deflection processor, designed 
for high-quality backend applications in double scan and HDTV TV sets with 4:3 or 16:9 picture 
tubes. The interfaces qualify the IC to be combined with state of the art digital scan rate 
converters, as well as analog HDTV sources. The DDP 3315C contains the entire digital video 
component, deflection processing,...

Page 27

CP-850FX Service Manual 
 
Europe R&D 
26 – horizontal frequency for VGA/SVGA/1080I 
– black switch off procedure 
– supports horizontal and vertical dynamic focus 
Miscellaneous 
– selectable ITU-R 601 4:1:1 / 4:2:2 YC r C b input at 27/32 MHz or double scan ITU-R 656 input 
at 54 MHz line-locked clock 
– crystal oscillator for horizontal safety 
– picture frame generator 
– hardware for simple 50/60 Hz to 100/120 Hz conversion (display frequency doubling) 
– PQFP80 package, 5 V analog and 3.3 V digital...

Page 28

CP-850FX Service Manual 
 
Europe R&D 
27 4.3.3 PINNING 
Pin No. Pin Name I/O Description Remarks 
1  Y6  I  Picture bus Luma   
2  Y7  I  Picture bus Luma (MSB)   
3  656EN  I  Enable 656 input mode   
4  LLC2  I  System clock input   
5 HS I Horizontal Sync Input   
6  VS  I  Vertical Sync Input   
7 FREQSEL I Selection of H-Drive Frequency Range   
8  CM1  I  Clock select 1   
9  CM0  I  Clock select 0   
10  VS2  I  Additionnal VSYNC input   
11  XTAL2  O  Analog Crystal Output   
12  XTAL1  I...

Page 29

CP-850FX Service Manual 
 
Europe R&D 
28 48  VRD/BCS  I  DAC Reference, Beam current safety   
49  AGND  S  Analog Ground for Analog Matrix   
50 FBLIN1 I Fast Blank1input   
51  RIN1  I  Analog Red1input    
52  GIN1  I  Analog Green1 input   
53  BIN1  I  Analog Blue1input    
54  FBLIN2  I  Fast Blank2 input   
55  RIN2 / PR  I  Analog Red2 input / PR Input   
56  GIN2 / Y  I  Analog Green2 input / Y Input   
57 BIN2/ PB  I  Analog Blue2 input / PB Input   
58  ASG2  S  Analog Shield Ground   
59 HCS...

Page 30

CP-850FX Service Manual 
 
Europe R&D 
29 4.4 MSP341X MULTISTANDARD SOUND PROCESSOR
 
The MSP 341x is designed as a single-chip Multistandard Sound Processor for applications in 
analogue and digital TV sets, video recorders, and PC cards. 
 
The MSP3411 has all functions of MSP3410 with the addition of a virtual surround sound 
features. 
Surround sound can be reproduced to a certain extent with two loudspeakers. The MSP3411 
includes virtualizer algorithm “3D Panorama” which has been approved by the...
Start reading Daewoo Dtf 2950 Service Manual

Related Manuals for Daewoo Dtf 2950 Service Manual

All Daewoo manuals