Daewoo Dlp 32c3 Instruction Manual

							LCD TELEVISION 
INSTRUCTION MANUAL
DLP-26C2
DLP-26C3
DLP-32C1
DLP-32C2
DLP-32C3
DLP-37C3
DLP-42C1
 
						

							Caution
2 WARNING : 
TO  REDUCE  THE  RISK  OF  FIRE  OR  ELECTRIC  SHOCK  HAZARD,  DO  NOT  EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Disposal of Used Electrical & Electronic Equipment
The meaning of the symbol on the product, its accessory or packaging indicates that this product
shall not be treated as household waste. Please, dispose of this equipment at your applicable collec-
tion point for the recycling of electrical & electronic equipments waste. In the European Union and
Other European countries which there are separate collection systems for used electrical and elec-
tronic product. By ensuring the correct disposal of this product, you will help prevent potentially
hazardous to the environment and to human health, which could otherwise be caused by unsuitable
waste handling of this product. Therecycling of materials will help conserve natural resources.
Please do not therefore dispose of your old electrical and electronic equipment with your household
waste. For more detailed information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you purchased the product.
Europe only
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulat-
ed “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and servic-
ing instructions in the literature accompanying the appliance.
7ownloadeda:roma‘Vd*anualucoma*anuals 
						

							Important
Safeguards
3
Please read the following safeguards for your TV and retain for future reference.
Always follow all warnings and instructions marked on the television.
1. Read, Retain and Follow All InstructionsRead all safety and operating instructions before operating the TV. Retain them safely
for future reference. Follow all operations and instructions accordingly.
2. Heed WarningsAdhere to all warnings on the appliance and in the operating instructions.
3. CleaningUnplug  the  TV  from  the  wall  outlet  before  cleaning.  Do  not  use  liquid,  abrasive,  or  aerosol  cleaners.
Cleaners  can  permanently  damage  the  cabinet  and  screen.  Use  a  lightly  dampened  cloth  for
cleaning. 
4. Attachments and EquipmentNever add any attachment and/or equipment without approval of the manufacturer as such additions may
result in the risk of fire, electric shock or other personal injury.
5. Water and MoistureThe  apparatus  shall  not  be  exposed  to  dripping  or  splashing  and  that  no  objects  filled  with  liquids,
such as vases, shall be placed  on the apparatus.
6. SettingDo  not  place  this  TV  on  an  unstable  cart,  stand  or  table.  Placing  the  TV  on  an  unstable  base  can
cause  the  TV  to  fall,  resulting  in  serious  personal  injuries  as  well  as  damage    to  the  TV.  Use  only  a
cart, stand, bracket or table recommended by the manufacturer or salesperson.
7. VentilationSlots  and  openings  in  the  cabinet  are  provided  for  ventilation  and  to  ensure  reliable  operation  of  the  TV  and  to
protect it from overheating. Do not cover the ventilations openings in the cabinet and never place the set in a confined
space such as built-in cabinet unless proper ventilation is provided. Leave a minimum 10 cm gap all around the unit.
8. Power SourceThis TV should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your appliance dealer or local power company.
9. Grounding or PolarizationThis TV is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This
plug  will  fit  into  the  power  outlet  only  one  way.  This  is  a  safety  feature.  If  you  are  unable  to  insert  the  plug  fully  into
the  outlet,  try  reversing  the  plug.  If  the  plug  should  still  fail  to  fit,  contact  your  electrician  to  replace  your  obsolete
outlet. Do not defeat the safety purpose of the polarized plug. A warning that an apparatus with CLASS I construction
shall be connected to a MAINS socket outlet with a protective earthing connection.
10. Power-Cord ProtectionPower-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, wall outlets, and the point
where they exit from the TV. 
MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.
11. LightningFor added protection for this TV during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the TV due to lightning and power-line surges.
12. Wall or Ceiling MountingWhen mounting the product on a wall or ceiling, be sure to install the product using the designated
mounting tool according to the method recommended by the manufacturer.
7ownloadeda:roma‘Vd*anualucoma*anuals 
						

							Important
Safeguards
4 13. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light
or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching such power lines or circuits as contact with
them might be fatal.
14. OverloadingDo not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
15. Object and Liquid Entr yNever push objects of any kind into this TV through openings as they may touch dangerous voltage points or
short-out parts that could result in fire or electric shock. Never spill liquid of any kind on or into the TV.
16. Outdoor Antenna GroundingIf an outside antenna or cable system is connected to the TV, be
sure the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static charges.
Section 810 of the National Electric Code, ANSI /NFPA No. 70-1984,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead in wire to an antenna
discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
17. Ser vicingDo not attempt to service this TV yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
18. Damage Requiring Ser viceUnplug the TV from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
(a) When the power-supply cord or plug is damaged.
(b) If liquid has been spilled, or objects have fallen into the TV.
(c) If the TV has been exposed to rain or water.
(d) If the TV does not operate normally by following the operating instructions. Adjust only those controls
that are covered by the operating instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to restore the TV to its normal operation.
(e) If the TV has been dropped or the cabinet has been damaged.
(f) When the TV exhibits a distinct change in performance - this indicates a need for service.
19. Replacement PartsWhen replacement parts are required, be sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
20. Safety CheckUpon completion of any service or repair to the TV, ask the service technician to perform safety checks to
determine that the TV is in safe operating condition.
21. HeatThe product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H) GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC — NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING
 
						

							Warning
5
This section must be read carefully and followed by the user prior to the operation of the product.
The manual states important instructions for the user's own safety, and the proper operation of the product.
In case of an accident, please unplug the unit from the outlet immediately.
Hold the plug when unplugging the unit
from the outlet. The cord may cause fire
or electric shock if damaged.Do not cause the product to lean or put it in
an unstable place since it may cause a
serious injury to a person, as well as damage
to the product if it falls. Do not put any object that contains water -
such as flowerpot - 
the unit.
The water may penetrate into the unit, and
be a cause of fire or hazardous electric
shock.To reduce the risk of electric shock, do
not remove cover or back. No user -
serviceable parts inside. Refer to qualified
service personnel for repair.
Do not put on or use the product near water
and moisture-such as in a bathroom,
washbowl, etc. It may be a cause of fire and
electric shock hazards.To prevent fire and damages to the product,
unplug the unit from the outlet during
lightning storm, or when it is left unattended
and unused for a long period of time. 
Do not let children hang on or climb on
the product since it may be a cause of
serious injury.Slots and openings in the case are provided
for ventilation to ensure reliable operation of
the product. Never put in any item-such as a
coin, paper, match- through these openings
since it may touch dangerous voltage points
that could result in fire or shock hazard. 
Do not put volatile substance-such as
benzene, naphtha- near the product since it
may cause a change in the products colour.
Do not view the TV too closely since it
may cause damage in your eyesight.Do not spill water or drop the remote
controller since it may be a cause of
malfunctioning. Refer servicing to qualified service
personnel for cleaning at least once a year
since dust inside the TV set may be a result
or fire and malfunctioning of the product.
 
						

							Warning
6
This section must be read carefully and followed by the user prior to the operation of the product.
The manual states important instructions for the user's own safety, and the proper operation of the product.
Please keep the user's manual in a safe place for future reference.
The product should be situated away from
any heat source-such as radiators, heat
registers, stoves, or other products that
produce heat.Do not put on any heavy item on the
power cord since it may result in fire or
hazardous electric shock if the cord is
damaged.Do not cover the top of the television set.
Ventilation will be prevented, and it may
be a cause of fire if the product is
internally overheated.
Unplug the power from the outlet and all the
related connections from the unit to prevent
electric shock. At least two people must work
together to move the TV set when transporting
to prevent the TV from falling, and
consequently, any serious injury or damage.Do not touch the power cord with
moisturized or wet hands when plugging
to or unplugging from the outlet since it
may be a cause of electric shock. Please be advised of electric wires and cables
when installing the antenna. It may be a cause of
hazardous electric shock and fire if the antenna
touches or falls on the electric wire; thus, it must be
installed firmly, and far away  from  the cables.
Do not expose the product to a dusty or
moisturized place since it may be a cause
of malfunctioning.The screen case of the product
(32C1/42C1) is scratched easily.
When cleaning, use the microfiber sheet
which enclosed.
When a force to give it cleans strongly, it
will be scratched and the products colour
will be changed. If foreign material gets in
the fiber, the product will be scratched.
Shake off the fiber cleanly and use.
 
						

							Table of
Contents
7
Installation and Maintenance
Antenna Connection 9
Video Connection 12
Camcorder & Video Game Connection 13
DVD Player Connection 14
STB Connection 15
PC Connection 16
Cable TV Broadcasting Connection 18
Connect with the Dolby Digital AMP 19
Name of Each Part 20
Basic Guide
Parts of the Remote Controller 22
Method To Use Basic Menu 24
To Watch TV 25
Setting Up TV Stations 27
Selection of AV and Multimedia Input Signal 31
Application Guide
Screen Adjustment 33
POP Mode37
Sound Adjustment 38
Selection of Language 41
Adjustment of Time 42
Other Functions 44
Teletext45
Troubleshooting 46
Standard of Product 48
7ownloadeda:roma‘Vd*anualucoma*anuals 
						

							Supplied
Accessories
8
Make sure that the following accessories are provided with the product.
AC cord
AC cordInstruction manual
MUTEPICTURE
P.MODE
STILL
3
D
 P
A
N
O
R
A
M
AP
.
P
R
P
.
P
R
LOCKSLEEP P.STILLP. SWA P
P.INPUT ASPECTSOUND
POWERRECALL
PREV PROKMULTIMEDIAM
E
N
UV
O
LV
O
L P
RP
R
1234567890X?
D
Y
N
A
M
IC
 B
A
S
S
Remote controllerBatteries
Cover Bottom
-When you install wall mounting you set
up cover bottom like upper picture.
Cable holderMicrofiber sheet
(32/42C1 ONLY) 
1
23
The method of wire arrangement
1. Assemble  the  cable  holder  enclosed  on  the  back
of TV. (PICTURE 1) 
(ASSEMBLY  METHOD:  After  you  push  the
"A"(prominence  part  of  cable  holder)  in  the
hole,  rotate  the  cable  holder  clockwise  as  an
angle  of  90°.  You  can  separate  in  reverse  order
of assembly.)
2. Open the cable holder. (PICTURE 2)
(  you  can  open  the  cable  holder  that  press  and
push "B" part.)
3. After arrange lines with the cable holder, lock the
"B" again. (PICTURE 3)
7ownloadeda:roma‘Vd*anualucoma*anuals 
						

							Antenna
Connection
9
Indoor Antenna Connection
1. Connect the feeder cable of the antenna to the combining adapter.
WHEN THE IMAGE IS NOT CLEAR : Unclear screen image and bad reception may be a cause of wrong
antenna connection. Be sure to check its direction and place when
installing.
2. Connect the combining adapter to the antenna input at the left side of the TV set.
WHEN USING THE COMBINING ADAPTER : You may obtain the combining adapter at your closest
Service Center.
HDMI INPUT AV1 AV2
PC INPUT   AUDIOS-VHS
AV3 L - AUDIO - R
OPTICAL UP-GRADE PCRT
COMPONENTPr
RLPb Y
Antenna Input BACK OF THE TV SET       
7ownloadeda:roma‘Vd*anualucoma*anuals 
						

							Antenna
Connection
10
Antenna socket at the left side of the TV set
ANT/CABLE
ANT/CABLE
CTV Antenna Connection
Such community TV Antenna installation may be found in most of co-op apartments.
When a coaxial cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to
the right.
When a feeder cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to
the right.
Antenna socket at the left side of the TV set
7ownloadeda:roma‘Vd*anualucoma*anuals