D-Link Router DIR-810L User Manual

							67
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Autoconfiguration
Se\fect  Autoconfiguration .(State\bess/DHCPv6)   from  the 
drop-down menu.
Se\fect either  \fbtain.DNS.server. address. automatica\b\by or 
Use.the.fo\b\bowing.DNS.Address.
Enter the primary and secondary DNS server addresses. 
Enter the LAN (\foca\f) I\uPv6 address for the router. 
Disp\fays the Router’s LAN Link-Loca\f Address.
Check to enab\fe the Autoconfi\buration feature.
Se\fect  Statefu\b .(DHCPv6) , SLAAC .+ .RDNSS   or SLAAC .+.
State\bess.DHCPv6.  
Enter the start IPv6 Address for the DHCPv6 ran\be for your 
\foca\f computers.
Enter  the  end  IPv6  Address  for  the  DHCPv6  ran\be  for  your 
\foca\f computers.
Enter the IPv6 Address Lifetime (in minutes).
My IPv6 Connection:
IPv6 DNS Settings:
Primary/Secondary DNS  Address:
LAN IPv6 Address:
LAN Link-Local Address: Enable 
Autoconfiguration:
Autoconfiguration Type:
IPv6 Address \fange  Start:
IPv6 Address \fange  End:
IPv6 Address Lifetime:  
						

							68
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
PPPoE
Se\fect PPPoE from the drop-down menu.
Enter  the  PPPoE  account  settin\bs  supp\fied  by  your  Internet 
provider (ISP). 
Se\fect  Static if your ISP assi\bned you the IP address, subnet mask, 
\bateway, and DNS server addresses. In most cases, se\fect  Dynamic.
Enter the IP address (Static PPPoE on\fy).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in the 
next box.
Enter the ISP Service Name (optiona\f).
Se\fect either A\bways-on, \fn-Demand, or Manua\b.
Enter a maximum id\fe time durin\b which the Internet connection 
is  maintained  durin\b  inactivity.  To  disab\fe  this  feature,  enab\fe 
Auto-reconnect.
Maximum Transmission Unit - you may need to chan\be the MTU for 
optima\f performance with your specific ISP. 1492 is the defau\ft MTU.
Se\fect either  \fbtain.DNS.server. address. automatica\b\by or  Use.
the.fo\b\bowing.DNS.Address.
Enter the primary and secondary DNS server addresses. 
Enter the LAN (\foca\f) I\uPv6 address for the router. 
Disp\fays the Router’s LAN Link-Loca\f Address.
Check to enab\fe the Autoconfi\buration feature.
My IPv6 Connection:
PPPoE:
Address Mode: IP Address:
User Name: Password:
Service Name:
\feconnection Mode: Maximum Idle Time: 
MTU:
IPv6 DNS Settings:
Primary/Secondary DNS  Address:
LAN IPv6 Address:
LAN Link-Local Address:
Enable Autoconfiguration:  
						

							69
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Autoconfiguration Type:
IPv6 Address \fange Start: IPv6 Address \fange End: IPv6 Address Lifetime: Se\fect Statefu\b.(DHCPv6), SLAAC.+.RDNSS or SLAAC.+.State\bess.DHCPv6.
Enter the start IPv6 Address for the DHCPv6 ran\be for your \foca\f computers.
Enter the end IPv6 Address for the DHCPv6 ran\be for your \foca\f computers.
Enter the IPv6 Address Lifetime (in minutes).  
						

							70
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
IPv6 in IPv4 Tunneling
Se\fect IPv6.in.IPv4. Tunne\b from the drop-down menu.
Enter the settin\bs supp\fi\ued by your Internet provider (ISP). 
Enter the LAN (\foca\f) I\uPv6 address for the router. 
Disp\fays the Router’s LAN Link-Loca\f Address.
Check to enab\fe the Autoconfi\buration feature.
Se\fect  Statefu\b. (DHCPv6),  SLAAC.+.RDNSS or  SLAAC.+.State\bess.
DHCPv6. 
Enter  the  start  IPv6  Address  for  the  DHCPv6  ran\be  for  your  \foca\f 
computers.
Enter  the  end  IPv6  Address  for  the  DHCPv6  ran\be  for  your  \foca\f 
computers.
Enter the Router Advertisement Lifetime (in minutes).
My IPv6 
Connection:
IPv6 in IPv4 Tunnel  Settings:
LAN IPv6 Address: LAN Link-Local  Address:
Enable 
Autoconfiguration:
Autoconfiguration  Type:
IPv6 Address  \fange Start:
IPv6 Address  \fange End:
Pv6 Address  Lifetime:  
						

							71
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
6 to 4 Tunneling
Se\fect 6.to.4 from the drop-down menu.
Enter the IPv6 settin\bs supp\fied \uby your Internet provider (ISP). 
Enter the primary and secondary DNS server addresses. 
Enter the LAN (\foca\f) I\uPv6 address for the router. 
Disp\fays the Router’s LAN Link-Loca\f Address.
Check to enab\fe the Autoconfi\buration feature.
Se\fect  Statefu\b. (DHCPv6),  SLAAC.+.RDNSS or  SLAAC.+.State\bess.
DHCPv6. 
Enter  the  start  IPv6  Address  for  the  DHCPv6  ran\be  for  your  \foca\f 
computers.
Enter  the  end  IPv6  Address  for  the  DHCPv6  ran\be  for  your  \foca\f 
computers.
Enter the IPv6 Address Lifetime (in minutes).
My IPv6 Connection:
6 to 4 Settings:
Primary/Secondary  DNS Address:
LAN IPv6 Address: LAN Link-Local  Address:
Enable 
Autoconfiguration:
Autoconfiguration  Type:
IPv6 Address \fange  Start:
IPv6 Address \fange  End:
IPv6 Address  Lifetime:  
						

							72
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
6rd
Se\fect 6rd from the drop-down menu.
Enter  the  address  settin\bs  supp\fied  by  your  Internet  provider 
(ISP). 
Enter the LAN (\foca\f) I\uPv6 address for the router. 
Disp\fays the Router’s LAN Link-Loca\f Address.
Check to enab\fe the Autoconfi\buration feature.
Se\fect  Stateful (DHCPv6), SLAAC+\fDNSS or SLAAC + Stateless 
DHCPv6. 
Enter the Router Advertisement Lifetime (in minutes).
My IPv6 Connection:
6\fD Settings:
LAN IPv6 Address:
LAN Link-Local Address: Enable 
Autoconfiguration:
Autoconfiguration Type:
\fouter Advertisement   Lifetime:  
						

							73
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Se\fect Link-Loca\b. \fn\by  from  the  drop-down 
menu.
Disp\fays the IPv6 address of the router.
My IPv6 Connection:
LAN IPv6 Address  Settings:
Link-Local Connectivity  
						

							74
D-Link DIR-810L User Manua\f
mydlinkTM Settings
On this pa\be the user\u can confi\bure the myd\fink settin\bs for this router. 
This feature wi\f\f a\f\fow you to use the myd\fink c\foud services, which in-
c\fude on\fine access and mana\bement of this router throu\bh the myd\fink 
porta\f website or the myd\fink Lite app for iOS and Android mobi\fe 
devices.
In the mydlink section, you can view the re\bistration status of the 
myd\fink account service. The mydlink Service fie\fd wi\f\f either disp\u\fay 
\fegistered or Non-\fegistered.
In the \fegister mydlink Service section, we can re\bister or modify a 
myd\fink account. C\fick on the \fegister mydlink Service button to initi-
ate this procedure.
After c\fickin\b the \fegister mydlink Service button, this window wi\f\f ap -
pear.
\fegister mydlink Service Wizard: Step 1
In this section we can se\fect one of two options.
•  Se\fect the ‘Yes, I have a mydlink account’ option if you a\fready have 
a myd\fink account that you want to use on this router. 
•  Se\fect the ‘No, I want to register and login with a new mydlink ac -
count’ option to re\bister a new account and use it on this \urouter.
C\fick the Next button to proceed to the next step. 
C\fick the Cancel button to discard the chan\bes made a\und return to the 
main pa\be.
The DIR-810L features a new c\foud service that pushes information such as firmware up\brade notifications, user activity, and 
intrusion a\ferts to the myd\fink app on your Android or iOS mobi\fe d\uevice. To ensure that your router is up-to-date with the 
\fatest features, myd\fink wi\f\f notify you when an update is avai\fab\fe for your router. You can a\fso monitor users’ on\fine activity 
with rea\f-time website browsin\b history, maintainin\b a safe and secure environment, especia\f\fy usefu\f f\uor monitorin\b your 
chi\fdren’s Internet usa\be at home.  
						

							75
D-Link DIR-810L User Manua\f
\fegister mydlink Service Wizard: Step 2
When re\bisterin\b a new account, the fo\f\fowin\b pa\be appears. The fo\f-
\fowin\b parameters wi\f\f be avai\fab\fe for confi\buration:
E-mail Address (Account 
Name):Enter your e-mai\f address here. This e-mai\f 
address wi\f\f a\fso become your account 
name.
Password: Enter your preferred password choice 
here.
Confirm Password: Re-enter your preferred password choice 
here.
Last Name: Enter your \fast name here.
First Name: Enter your first name here.
Accept terms and 
conditions: Tick this option to accept the myd\fink 
terms and conditions.
C\fick the Next button to proceed to the next step. 
C\fick the Prev button to return to the previous step.
C\fick the Cancel button to discard the chan\bes made a\und return to the 
main pa\be.
When \fo\b\bin\b in with an existing account, the fo\f\fowin\b pa\be appears. 
The fo\f\fowin\b parameters wi\f\f be avai\fab\fe for confi\buration: E-mail Address (Account 
Name):Enter your e-mai\f address here. This e-mai\f 
address wi\f\f a\fso be your account name.
Password: Enter your preferred password choice 
here.
C\fick the Login button to \fo\bin usin\b these account detai\fs.
C\fick the Prev button to return to the previous step.
C\fick the Cancel button to discard the chan\bes made a\und return to the 
main pa\be.  
						

							76
D-Link DIR-810L User Manua\f
At any point durin\b this wizard, you can chan\be the prefered \fan\bua\be. 
To chan\be the \fan\bua\be, se\fect the desired \fan\bua\be option fr\uom the 
Language drop-down menu, found on the top ri\bht of this pa\be.
End of Wizard