D-Link Router DIR-636L User Manual

							57
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
H\bwe\fer,  if  the  aut\bmatic  detecti\bn  fails,  the  user  will  be  pr\bmpt  t\b  either  Try.
again. \br t\b click \bn the  Guide.me.through. the.IPv6. settings butt\bn t\b initiate the 
manual c\bntinual \bf the wizard.
There  are  se\feral  c\bnnecti\bn  types  t\b  ch\b\bse  fr\bm.  If  y\bu  are  unsure  \bf  y\bur 
c\bnnecti\bn meth\bd, please c\bntact y\bur IP\f6 Internet Ser\fice Pr\b\fider. 
Note:  If  using  the  PPP\bE  \bpti\bn,  y\bu  will  need  t\b  ensure  that  any  PPP\bE  client 
s\bftware \bn y\bur c\bmputers has been rem\b\fed \br disabled. The 3 \bpti\bns a\failable 
\bn this page are. IPv6.over. PPPoE,. Static.IPv6.address. and.Route, and  Tunne\bing.
Connection. 
Ch\b\bse  the  required  IP\f6  Internet  C\bnnecti\bn  type  and  click  \bn  the  Next butt\bn 
t\b  c\bntinue.  Click  \bn  the  Prev butt\bn  t\b  return  t\b  the  pre\fi\bus  page.  Click  \bn  the 
Cance\b butt\bn t\b discard all the changes mad\le and return t\b the main page.
Click \bn the Next butt\bn t\b c\bntinue. Click \bn the Prev butt\bn t\b return t\b the pre\fi\bus page.
Click \bn the Cance\b butt\bn t\b discard all the changes mad\le and return t\b the main page.  
						

							58
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
IPv6.over.PPPoE
After  selecting  the  IP\f6  \b\fer  PPP\bE  \bpti\bn,  the  user  will  be  able  t\b  c\bnfigure  the 
IP\f6  Internet  c\bnnecti\bn  that  requires  a  username  and  passw\brd  t\b  get  \bnline. 
M\bst DSL m\bdems use \lthis type \bf c\bnnecti\bn.
The f\bll\bwing parameters will be a\failable f\br c\bnfigurati\bn:
PPPoE.Session: Select  the  PPP\bE  Sessi\bn  \falue  used  here.  This 
\bpti\bn  will  state  that  this  c\bnnecti\bn  shares  it’s 
inf\brmati\bn  with  the  already  c\bnfigured  IP\f6 
PPP\bE  c\bnnecti\bn,  \br  the  user  can  create  a  new 
PPP\bE c\bnnecti\bn here.
User.Name: Enter the PPP\bE username used here. If y\bu d\b n\bt 
kn\bw y\bur user name, please c\bntact y\bur ISP.
Password: Enter the PPP\bE passw\brd used here. If y\bu d\b n\bt 
kn\bw y\bur passw\brd, please c\bntact y\bur ISP.
Verify.Password: Re-enter the PPP\bE passw\brd used here.
Service.Name: Enter  the  ser\fice  name  f\br  this  c\bnnecti\bn  here. 
This \bpti\bn is \bpti\bna\ll.  
						

							59
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
Static.IPv6.Address.Connection
This m\bde is used when y\bur ISP pr\b\fides y\bu with a set IP\f6 addresses that d\bes n\bt change. The IP\f6 inf\brmati\bn is manually entered in y\bur 
IP\f6  c\bnfigurati\bn  settings. Y\bu  must  enter  the  IP\f6  address,  Subnet  Prefix  Length,  Default  Gateway,  Primary  DNS  Ser\fer,  and  Sec\bndary  DNS 
Ser\fer. Y\bur ISP pr\b\fides y\bu with all this inf\brmati\bn.
Use.Link-Loca\b.
Address:
IPv6.Address: Subnet.Prefix. Length:
Defau\bt.Gateway:
Primary.IPv6.DNS. Address:
Secondary.IPv6. DNS.Address:
LAN.IPv6.Address: The  Link-l\bcal  address  is  used  by  n\bdes  and  r\buters  when 
c\bmmunicating  with  neighb\bring  n\bdes  \bn  the  same  link. 
This  m\bde  enables  IP\f6-capable  de\fices  t\b  c\bmmunicate 
with each \bther \bn th\le LAN side.
Enter the WAN IP\f6 address f\br the r\buter here.
Enter the WAN subnet prefix length \falue used here.
Enter the WAN default gateway IP\f6 address used here.
Enter the WAN primary DNS Ser\fer address used here.
Enter the WAN sec\bndary DNS Ser\fer address used here.
These  are  the  settings  \bf  the  LAN  (L\bcal  Area  Netw\brk) 
IP\f6  interface  f\br  the  r\buter. The  r\buter’s  LAN  IP\f6  Address 
c\bnfigurati\bn  is  based  \bn  the  IP\f6  Address  and  Subnet 
assigned by y\bur ISP. (A subnet with prefix /64 is supp\brted 
in LAN.)  
						

							60
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
The f\bll\bwing parameters will be a\failable f\br c\bnfigurati\bn:
6rd IPv6 Prefix: Enter the 6rd IP\f6 address and prefix \falue used 
here.
IPv4 Address: Enter the IP\f4 address used here.
Mask Leng\bh: Enter the IP\f4 mask length used \lhere.
Assigned IPv6 Prefix: Displays the IP\f6 assigned prefix \falue here.
6rd Border Relay IPv4  Address:Enter the 6rd b\brder relay IP\f4 address used here.
IPv6 DNS Server: Enter the primary DNS Ser\fer address used here.
The IP\f6 Internet C\bnnecti\bn Setup Wizard is c\bmplete. 
Click \bn the Connect butt\bn t\b c\bntinue. Click \bn the  Prev butt\bn t\b return t\b 
the pre\fi\bus page. Click \bn the  Cance\b butt\bn t\b discard all the changes made 
and return t\b the main page.
Tunne\bing.Connection.(6rd)
After selecting the Tunneling C\bnnecti\bn (6rd) \bpti\bn, the user \lcan c\bnfigure the IP\f6 6rd c\bnnecti\bn settings.  
						

							61
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
IPv6 Manual Se\bup
There are se\feral c\bnnecti\bn types t\b ch\b\bse fr\bm: Aut\b Detecti\bn, Static IP\f6, Aut\bc\bnfigurati\bn (SLAAC/DHCP\f6), PPP\bE, 
IP\f6 in IP\f4 Tunnel, 6t\b4, 6rd, and Link-l\bcal. If y\bu are unsure \bf y\bur c\bnnecti\bn meth\bd, please c\bntact y\bur IP\f6 Internet 
Ser\fice Pr\b\fider. 
Note:  If using the PPP\bE \bpti\bn, y\bu will need t\b ensure that any PPP\bE client s\bftware \bn y\bur c\bmputers has been rem\b\fed 
\br disabled.
Au\bo De\bec\bion
Select  Auto.Detection   t\b  ha\fe  the  r\buter  detect  and  aut\bmatically 
c\bnfigure y\bur IP\f6 setting fr\bm y\bur ISP.  
						

							62
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
S\ba\bic IPv6
Select Static.IPv6 fr\bm the dr\bp-d\bwn menu.
Enter the address settings supplied by y\bur Internet pr\b\fider 
(ISP). 
Enter the LAN (l\bcal) I\lP\f6 address f\br the r\buter. 
Displays the R\buter’s LAN Link-L\bcal Address.
Check t\b enable the Aut\bc\bnfigurati\bn feature.
Select  Statefu\b .(DHCPv6) , SLAAC .+ .RDNSS   \br SLAAC .+.
State\bess.DHCPv6. 
Enter the start IP\f6 Address f\br the DHCP\f6 range f\br y\bur 
l\bcal c\bmputers.
Enter  the  end  IP\f6  Address  f\br  the  DHCP\f6  range  f\br  y\bur 
l\bcal c\bmputers.
Enter the IP\f6 Address Lifetime (in minutes).
My IPv6 Connec\bion:
WAN IPv6 Address  Se\b\bings:
LAN IPv6 Address:
LAN Link-Local Address: Enable 
Au\boconfigura\bion:
Au\boconfigura\bion Type:
IPv6 Address Range  S\bar\b:
IPv6 Address Range  End:
IPv6 Address Life\bime:  
						

							63
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
Au\boconfigura\bion
Select  Autoconfiguration .(State\bess/DHCPv6)   fr\bm  the 
dr\bp-d\bwn menu.
Select either  \fbtain.DNS.server. address. automatica\b\by \br 
Use.the.fo\b\bowing.DNS.Address.
Enter the primary and sec\bndary DNS ser\fer addresses. 
Enter the LAN (l\bcal) I\lP\f6 address f\br the r\buter. 
Displays the R\buter’s LAN Link-L\bcal Address.
Check t\b enable the Aut\bc\bnfigurati\bn feature.
Select  Statefu\b .(DHCPv6) , SLAAC .+ .RDNSS   \br SLAAC .+.
State\bess.DHCPv6.  
Enter the start IP\f6 Address f\br the DHCP\f6 range f\br y\bur 
l\bcal c\bmputers.
Enter  the  end  IP\f6  Address  f\br  the  DHCP\f6  range  f\br  y\bur 
l\bcal c\bmputers.
Enter the IP\f6 Address Lifetime (in minutes).
My IPv6 Connec\bion:
IPv6 DNS Se\b\bings:
Primary/Secondary DNS  Address:
LAN IPv6 Address:
LAN Link-Local Address: Enable 
Au\boconfigura\bion:
Au\boconfigura\bion Type:
IPv6 Address Range  S\bar\b:
IPv6 Address Range  End:
IPv6 Address Life\bime:  
						

							64
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
PPPoE
Select PPPoE fr\bm the dr\bp-d\bwn menu.
Enter  the  PPP\bE  acc\bunt  settings  supplied  by  y\bur  Internet 
pr\b\fider (ISP). 
Select  Static if y\bur ISP assigned y\bu the IP address, subnet mask, 
gateway, and DNS ser\fer addresses. In m\bst cases, select  Dynamic.
Enter the IP address (Static PPP\bE \bnly).
Enter y\bur PPP\bE user name.
Enter y\bur PPP\bE passw\brd and then retype the passw\brd in the 
next b\bx.
Enter the ISP Ser\fice Name (\bpti\bnal).
Select either A\bways-on, \fn-Demand, \br Manua\b.
Enter a maximum idle time during which the Internet c\bnnecti\bn 
is  maintained  during  inacti\fity.  T\b  disable  this  feature,  enable 
Aut\b-rec\bnnect.
Maximum Transmissi\bn Unit - y\bu may need t\b change the MTU f\br 
\bptimal perf\brmance with y\bur specific ISP. 1492 is the default MTU.
Select either  \fbtain.DNS.server. address. automatica\b\by \br  Use.
the.fo\b\bowing.DNS.Address.
Enter the primary and sec\bndary DNS ser\fer addresses. 
Enter the LAN (l\bcal) I\lP\f6 address f\br the r\buter. 
Displays the R\buter’s LAN Link-L\bcal Address.
Check t\b enable the Aut\bc\bnfigurati\bn feature.
My IPv6 Connec\bion:
PPPoE:
Address Mode: IP Address:
User Name: Password:
Service Name:
Reconnec\bion Mode: Maximum Idle Time: 
MTU:
IPv6 DNS Se\b\bings:
Primary/Secondary DNS  Address:
LAN IPv6 Address:
LAN Link-Local Address:
Enable Au\boconfigura\bion:  
						

							65
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
Au\boconfigura\bion Type:
IPv6 Address Range S\bar\b: IPv6 Address Range End: IPv6 Address Life\bime: Select Statefu\b.(DHCPv6), SLAAC.+.RDNSS \br SLAAC.+.State\bess.DHCPv6.
Enter the start IP\f6 Address f\br the DHCP\f6 range f\br y\bur l\bcal c\bmputers.
Enter the end IP\f6 Address f\br the DHCP\f6 range f\br y\bur l\bcal c\bmputers.
Enter the IP\f6 Address Lifetime (in minutes).  
						

							66
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
IPv6 in IPv4 Tunneling
Select IPv6.in.IPv4. Tunne\b fr\bm the dr\bp-d\bwn menu.
Enter the settings sup\lplied by y\bur Internet pr\b\fider (ISP). 
Enter the LAN (l\bcal) I\lP\f6 address f\br the r\buter. 
Displays the R\buter’s LAN Link-L\bcal Address.
Check t\b enable the Aut\bc\bnfigurati\bn feature.
Select  Statefu\b. (DHCPv6),  SLAAC.+.RDNSS \br  SLAAC.+.State\bess.
DHCPv6. 
Enter  the  start  IP\f6  Address  f\br  the  DHCP\f6  range  f\br  y\bur  l\bcal 
c\bmputers.
Enter  the  end  IP\f6  Address  f\br  the  DHCP\f6  range  f\br  y\bur  l\bcal 
c\bmputers.
Enter the R\buter Ad\fertisement Lifetime (in minutes).
My IPv6 
Connec\bion:
IPv6 in IPv4 Tunnel  Se\b\bings:
LAN IPv6 Address: LAN Link-Local  Address:
Enable 
Au\boconfigura\bion:
Au\boconfigura\bion  Type:
IPv6 Address  Range S\bar\b:
IPv6 Address  Range End:
Pv6 Address  Life\bime: