D-Link Router DIR-636L User Manual

							27
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
In\berne\b Connec\bion Se\bup
Click  Manua\b. Internet. Connection. Setup t\b c\bnfigure y\bur 
c\bnnecti\bn manually and c\bntinue t\b the next page.
If y\bu want t\b c\bnfigure y\bur r\buter t\b c\bnnect t\b the Internet 
using the wizard, click  Internet.Connection. Setup.Wizard. 
Y\bu will be directed t\b the Quick Setup Wizard. Please refer 
t\b page 14.  
						

							28
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
Select Static.IP   t\b  manually  enter  the  IP  settings  supplied  by 
y\bur ISP.
Ad\fanced  D\bmain  Name  System  (DNS)  ser\fices  enhances  y\bur 
Internet  perf\brmance  by  getting  y\bu  the  inf\brmati\bn  and  web 
pages  y\bu  are  l\b\bking  f\br  faster  and  m\bre  reliably.  In  additi\bn, 
it  impr\b\fes  y\bur  \b\ferall  Internet  experience  by  c\brrecting  many 
c\bmm\bn  typ\b  mistakes  aut\bmatically,  taking  y\bu  where  y\bu 
intended t\b g\b and sa\fing y\bu \faluable time.
Disclaimer:  D-Link makes no warranty as to the a\failability, reliability, 
functionality and operation of the Ad\fanced DNS ser\fice or its features.
Check  t\b  enable  true  Gigabit  r\buting.  This  will  increase  the 
thr\bugh-put \bf the WAN-LAN c\bnnecti\fity \bf the r\buter.
Enter the IP address assigned by y\bur ISP.
Enter the Subnet Mask assigned by y\bur ISP.
Enter the Gateway assigned by y\bur ISP.
The DNS ser\fer inf\brmati\bn will be supplied by y\bur ISP (Internet 
Ser\fice Pr\b\fider.)
Maximum Transmissi\bn Unit - y\bu may need t\b change the MTU f\br \bptimal perf\brmance with y\bur specific ISP. 1500 is the 
default MTU.
My In\berne\b Connec\bion:
Enable Advanced DNS  Service:
Enable True \figabi\b 
Rou\bing Connec\bivi\by:
IP Address:
Subne\b Mask:
Defaul\b \fa\beway: DNS Servers:
MTU:
Manual In\berne\b Se\bup
S\ba\bic (assigned by ISP)
Select Static IP Address if all the Internet p\brt’s IP inf\brmati\bn is pr\b\fided t\b y\bu by y\bur ISP. Y\bu will need t\b enter in the IP address, subnet mask, 
gateway address, and DNS address(es) pr\b\fided t\b y\bu by y\bur ISP. Each IP address entered in the fields must be in the appr\bpriate IP f\brm, which 
are f\bur \bctets separated by a d\bt (x.x.x.x). The R\buter will n\bt accept the IP address if it is n\bt in\l this f\brmat.  
						

							29
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
MAC Address: The default MAC Address is set t\b the Internet p\brt’s physical interface MAC address \bn the Br\badband R\buter. It is n\bt rec\bmmended 
that y\bu change the default MAC address unless required by y\bur ISP.  Y\bu can use the  Copy.Your.PC’s.MAC. Address butt\bn t\b 
replace the Internet p\brt’s MAC address with the MAC address \bf y\bur Ethernet card.  
						

							30
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
S e l e c t  D ynamic .IP .(DHCP)   t\b   \b b t a i n   I P   Ad d re s s   i n f\b r m at i \b n 
aut\bmatically fr\bm y\bur ISP. Select this \bpti\bn if y\bur ISP d\bes n\bt gi\fe 
y\bu  any  IP  numbers  t\b  use. This  \bpti\bn  is  c\bmm\bnly  used  f\br  cable 
m\bdem ser\fices.
Ad\fanced D\bmain Name System (DNS) ser\fices enhances y\bur Internet 
perf\brmance  by  getting  y\bu  the  inf\brmati\bn  and  web  pages  y\bu 
are  l\b\bking  f\br  faster  and  m\bre  reliably.  In  additi\bn,  it  impr\b\fes  y\bur 
\b\ferall Internet experience by c\brrecting many c\bmm\bn typ\b mistakes 
aut\bmatically,  taking  y\bu  where  y\bu  intended  t\b  g\b  and  sa\fing  y\bu 
\faluable time.
Disclaimer:   D-Link  makes  no  warranty  as  to  the  a\failability,  reliability, 
functionality and operation of the Ad\fanced DNS ser\fice or its features.
Check t\b enable true Gigabit r\buting. This will increase the thr\bugh-put 
\bf the WAN-LAN c\bnnecti\fity \bf the r\buter.
The H\bst Name is \bpti\bnal but may be required by s\bme ISPs. Lea\fe 
blank if y\bu are n\bt sure.
Check  the  b\bx  if  y\bu  are  ha\fing  pr\bblems  \bbtaining  an  IP  address 
fr\bm y\bur ISP.
Enter the Primary and sec\bndary DNS ser\fer IP addresses assigned by y\bur ISP. These addresses are usually \bbtained aut\bmatically 
fr\bm y\bur ISP. Lea\fe at 0.0.0.0 if y\bu did n\bt specifica\llly recei\fe these fr\bm y\bur ISP.
Maximum Transmissi\bn  Unit  -  y\bu  may  need  t\b  change  the  MTU  f\br  \bptimal  perf\brmance  with  y\bur  specific  ISP.  1500  is  the 
default MTU.
The default MAC Address is set t\b the Internet p\brt’s physical interface MAC address \bn the Br\badband R\buter. It is n\bt rec\bmmended 
that y\bu change the default MAC address unless required by y\bur ISP.  Y\bu can use the  Copy.Your.PC’s.MAC. Address butt\bn t\b 
replace the Internet p\brt’s MAC address with the MAC address \bf y\bur Ethernet card.
My In\berne\b 
Connec\bion:
Enable Advanced  DNS Service:
Hos\b Name:
MAC Address:
Dynamic (Cable)
Primary/Secondary  DNS Server:
MTU:
Use Unicas\bing:
Enable True \figabi\b 
Rou\bing Connec\bivi\by:  
						

							31
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
Select PPPoE.(Username/Password) fr\bm the dr\bp-d\bwn menu.
Ad\fanced  D\bmain  Name  System  (DNS)  ser\fices  enhances  y\bur  Internet 
perf\brmance by getting y\bu the inf\brmati\bn and web pages y\bu are l\b\bking 
f\br  faster  and  m\bre  reliably.  In  additi\bn,  it  impr\b\fes  y\bur  \b\ferall  Internet 
experience by c\brrecting many c\bmm\bn typ\b mistakes aut\bmatically, taking 
y\bu where y\bu intended t\b g\b and sa\fing y\bu \faluable time.
Disclaimer: D-Link makes no warranty as to the a\failability, reliability, functionality 
and operation of the Ad\fanced DNS ser\fice or its features.
Check t\b enable true Gigabit r\buting. This will increase the thr\bugh-put \bf 
the WAN-LAN c\bnnecti\fity \bf the r\buter.
Select  Static.IP  if y\bur ISP assigned y\bu the IP address, subnet mask, gateway, 
and DNS ser\fer addresses. In m\bst cases, select Dynamic.
Enter the IP address (Static PPP\bE \bnly).
Enter y\bur PPP\bE user name.
Enter y\bur PPP\bE passw\brd and then retype the passw\brd in the next b\bx.
Enter the ISP Ser\fice Name (\bpti\bnal).
Select either A\bways-on, \fn-Demand, \br Manua\b.
My In\berne\b 
Connec\bion:
Enable 
Advanced DNS  Service:
Enable True 
\figabi\b Rou\bing  Connec\bivi\by:
Address Mode:
IP Address:
User Name: Password:
Service Name: Reconnec\b  Mode:
In\berne\b Se\bup
PPPoE (DSL)
Ch\b\bse  PPP\bE  (P\bint  t\b  P\bint  Pr\bt\bc\bl  \b\fer  Ethernet)  if  y\bur  ISP  uses  a  PPP\bE  c\bnnecti\bn. Y\bur  ISP  will  pr\b\fide  y\bu  with  a 
username and passw\brd. This \bpti\bn is typically used f\br DSL ser\fices. Make sure t\b rem\b\fe y\bur PPP\bE s\bftware fr\bm y\bur 
c\bmputer. The s\bftware is n\b l\bnger neede\ld and will n\bt w\brk thr\bugh a r\buter.  
						

							32
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
Maximum Idle Time:
DNS 
Addresses:
MTU:
MAC Address: Enter  a  maximum  idle  time  during  which  the  Internet  c\bnnecti\bn  is  maintained  during  inacti\fity. T\b  disable  this  feature,  enable 
Aut\b-rec\bnnect.
Enter the Primary and Sec\bndary DNS Ser\fer Addresses (Static PPP\bE \bnly).
Maximum Transmissi\bn Unit - y\bu may need t\b change the MTU f\br \bptimal perf\brmance with y\bur specific ISP. 1492 is the default 
MTU.
The default MAC Address is set t\b the Internet p\brt’s physical interface MAC address \bn the Br\badband R\buter. It is n\bt rec\bmmended 
that y\bu change the default MAC address unless required by y\bur ISP.  Y\bu can use the 
Copy.Your.PC’s.MAC. Address butt\bn t\b 
replace the Internet p\brt’s MAC address with the MAC address \bf y\bur Ethernet card.  
						

							33
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
Select PPTP.(Username/Password) fr\bm the dr\bp-d\bwn menu.
Ad\fanced D\bmain Name System (DNS) ser\fices enhances y\bur Internet 
perf\brmance  by  getting  y\bu  the  inf\brmati\bn  and  web  pages  y\bu 
are l\b\bking f\br faster and m\bre reliably. In additi\bn, it impr\b\fes y\bur 
\b\ferall Internet experience by c\brrecting many c\bmm\bn typ\b mistakes 
aut\bmatically, taking y\bu where y\bu intended t\b g\b and sa\fing y\bu 
\faluable time.
Disclaimer:  D-Link  makes  no  warranty  as  to  the  a\failability,  reliability, 
functionality and operation of the Ad\fanced DNS ser\fice or its features.
Check t\b enable true Gigabit r\buting. This will increase the thr\bugh-
put \bf the WAN-LAN c\bnnecti\fity \bf the r\buter.
Select  Static  if  y\bur  ISP  assigned  y\bu  the  IP  address,  subnet  mask, 
gateway, and DNS ser\fer addresses. In m\bst cases, select Dynamic.
Enter the IP address (Static PPTP \bnly).
Enter the Primary and Sec\bndary DNS Ser\fer Addresses (Static PPTP 
\bnly).
Enter the Gateway IP Address pr\b\fided by y\bur ISP.
Enter the Ser\fer IP pr\b\fided by y\bur ISP (\bpti\bnal).
In\berne\b Se\bup
PPTP
Ch\b\bse PPTP (P\bint-t\b-P\bint-Tunneling Pr\bt\bc\bl ) if y\bur ISP uses a PPTP c\bnnecti\bn. Y\bur ISP will pr\b\fide y\bu with a username 
and passw\brd. This \bpti\bn is typically used f\br DSL ser\fices. 
My In\berne\b 
Connec\bion:
Enable 
Advanced DNS  Service:
Enable True 
\figabi\b Rou\bing  Connec\bivi\by:
Address Mode:
PPTP IP Address: PPTP Subne\b  Mask:
PPTP \fa\beway:
PPTP Server IP:  
						

							34
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
Enter y\bur PPTP username.
Enter y\bur PPTP passw\brd and then retype the passw\brd in the next b\bx.
Select either A\bways-on, \fn-Demand, \br Manua\b.
Enter  a  maximum  idle  time  during  which  the  Internet  c\bnnecti\bn  is  maintained  during  inacti\fity. T\b  disable  this  feature,  enable 
Aut\b-rec\bnnect.
The DNS ser\fer inf\brmati\bn will be supplie\ld by y\bur ISP (Internet Ser\fice Pr\b\fider.)
Maximum Transmissi\bn Unit - y\bu may need t\b change the MTU f\br \bptimal perf\brmance with y\bur specific ISP. 1400 is the default 
MTU.
The default MAC Address is set t\b the Internet p\brt’s physical interface MAC address \bn the Br\badband R\buter. It is n\bt rec\bmmended 
that y\bu change the default MAC address unless required by y\bur ISP.  Y\bu can use the  C\bone.Your.PC’s.MAC. Address butt\bn t\b 
replace the Internet p\brt’s MAC address with the MAC address \bf y\bur Ethernet card.
Username:
Password:  
Reconnec\b  Mode:
Maximum Idle  Time:
DNS Servers: MTU:
MAC Address:  
						

							35
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
Select L2TP.(Username/Password)  fr\bm the dr\bp-d\bwn menu.
Ad\fanced D\bmain Name System (DNS) ser\fices enhances y\bur 
Internet perf\brmance by getting y\bu the inf\brmati\bn and web 
pages y\bu are l\b\bking f\br faster and m\bre reliably. In additi\bn, 
it impr\b\fes y\bur \b\ferall Internet experience by c\brrecting many 
c\bmm\bn  typ\b  mistakes  aut\bmatically,  taking  y\bu  where  y\bu 
intended t\b g\b and sa\fing y\bu \faluable time.
Disclaimer:   D-Link  makes  no  warranty  as  to  the  a\failability, 
reliability, functionality and operation of the Ad\fanced DNS ser\fice 
or its features.
Check  t\b  enable  true  Gigabit  r\buting.  This  will  increase  the 
thr\bugh-put \bf the WAN-LAN c\bnnecti\fity \bf the r\buter.
Select  Static  if  y\bur  ISP  assigned  y\bu  the  IP  address,  subnet 
mask, gateway, and DNS ser\fer addresses. In m\bst cases, select 
Dynamic.
Enter the L2TP IP addr\less supplied by y\bur ISP (Static \bnly).
Enter the Subnet Mask supplied by y\bur ISP (Static \bnly).
Enter the Gateway IP Address pr\b\fided by y\bur ISP.
Enter the Ser\fer IP pr\b\fided by y\bur ISP (\bpti\bnal).
My In\berne\b 
Connec\bion:
Enable 
Advanced DNS  Service:
Enable True 
\figabi\b Rou\bing  Connec\bivi\by:
Address Mode:
L2TP IP Address: L2TP Subne\b  Mask:
L2TP \fa\beway:
L2TP Server IP:
In\berne\b Se\bup
L2TP
Ch\b\bse L2TP (Layer 2 Tunneling Pr\bt\bc\bl) if y\bur ISP uses a L2TP c\bnnecti\bn. Y\bur ISP will pr\b\fide y\bu with a username and 
passw\brd. This \bpti\bn is typically used f\br DSL ser\fices.   
						

							36
D-Link DIR-636L User Manual
Secti\bn 3 - C\bnfigurati\bn
Username:Password:
Reconnec\b  Mode:
Maximum Idle  Time: 
DNS Servers: MTU:
Clone MAC  Address: Enter y\bur L2TP username.
Enter y\bur L2TP passw\brd and then retype the passw\brd in the next b\bx.
Select either A\bways-on, \fn-Demand, \br Manua\b.
Enter  a  maximum  idle  time  during  which  the  Internet  c\bnnecti\bn  is  maintained  during  inacti\fity. T\b  disable  this  feature,  enable 
Aut\b-rec\bnnect.
Enter the Primary and Sec\bndary DNS Ser\fer Addresses (Static L2TP \bnly).
Maximum Transmissi\bn Unit - y\bu may need t\b change the MTU f\br \bptimal perf\brmance with y\bur specific ISP. 1400 is the default 
MTU.
The default MAC Address is set t\b the Internet p\brt’s physical interface MAC address \bn the Br\badband R\buter. It is n\bt rec\bmmended 
that y\bu change the default MAC address unless required by y\bur ISP.  Y\bu can use the 
C\bone.Your.PC’s.MAC. Address butt\bn t\b 
replace the Internet p\brt’s MAC address with the MAC address \bf y\bur Ethernet card.