D-Link Router DIR-635 User Manual

1D-Link DIR-635 User Manual
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from 
a DHCP server (i.e. wireless router) automatically. To verify your IP \
address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK.
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and 
the default...

D-Link DIR-635 User Manual
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps 
below:
Step 1
Windows® XP - Click on Start > Control Panel > Network Connections.
Windows® 2000 - From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3...

3D-Link DIR-635 User Manual
Appendix B - Networking Basics
If you are connecting the router to a cable/DSL/satellite modem, please \
follow the steps below:
1. Place the router in an open and central location. Do not plug the power \
adapter into the router. 
2.  Turn the power off on your modem. If there is no on/off switch, then unplug the modem’s power adapter. Shut down 
your computer.
3.  Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into...

D-Link DIR-635 User Manual
Appendix B - Networking Basics
If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have 
to do the following before connecting the router to your network:
• Disable UPnP™
• Disable DHCP
• Change the LAN IP address to an available address on your network. The LAN ports on the router cannot 
accept a DHCP address from your other router.
To connect to another router, please follow the steps below:
1. Plug...

5D-Link DIR-635 User Manual
Appendix B - Networking Basics
6. Disconnect the Ethernet cable from the router and reconnect your compute\
r to your network. 
7.  Connect  an  Ethernet  cable  in  one  of  the  LAN  ports  of  the  router  and  connect  it  to  your  other  router.  Do  not  plug 
anything into the Internet port of the D-Link router. 
8.  You may now use the other 3 LAN ports to connect other Ethernet devices and computers. To configure your wireless 
network, open a web browser and...

6D-Link DIR-635 User Manual
Appendix C - Technical Specifications
Technical Specifications
Standards
 • IEEE 802.11n (draft)
  • IEEE 802.11g
  • IEEE 802.11b
  • IEEE 802.3
  • IEEE 802.3u
Security
 • WPA-Personal
  • WPA2-Personal
  • WPA-Enterprise
  • WPA2-Enterprise
  • 64/128-bit WEP
Wireless Signal Rates*
 • 108Mbps   • 48Mbps
  • 54Mbps   • 24Mbps
  • 36Mbps  • 12Mbps
  • 18Mbps   • 9Mbps
  • 11Mbps   • 5.5Mbps
  • 6Mbps   • 1Mbps
  • 2Mbps      
 MSC (0-15)
  • 130Mbps (270)  • 117Mbps...

D-Link DIR-635 User Manual
Appendix D - Contacting Technical Support
Contacting Technical Support
You can find software updates and user documentation on the D-Link websites.
If you require product support, we encourage you to browse our FAQ section on the Web Site before contacting 
the Support line. We have many FAQ’s which we hope will provide you a speedy resolution for your problem. 
For Customers within The United Kingdom & Ireland:
D-Link UK & Ireland Technical Support over the...