D-Link Router DIR-635 User Manual

1D-Link DIR-635 User Manual
Section 3 - Configuration
SPI  (Stateful  Packet  Inspection,  also  known  as  dynamic  packet 
filtering) helps to prevent cyber attacks by tracking more state per 
session.  It  validates  that  the  traffic  passing  through  the  session 
conforms to the protocol.
Select one of the following for TCP and UDP ports:
Endpoint Independent - Any incoming traffic sent to an open port 
will be forwarded to the application that opened the port. The port 
will close if idle...

D-Link DIR-635 User Manual
Section 3 - ConfigurationVPN Passthrough
RTSP
H.323
SIP (VoIP)
MMS
Application Level Gateway (ALG) Configuration
Here you can enable or disable ALG’s. Some protocols and applications require special handling of the IP payload to 
make them work with network address translation (NAT). Each ALG provides special handling for a specific protocol 
or application. A number of ALGs for common applications are enabled by \
default.
Allows multiple machines on the LAN to...

3D-Link DIR-635 User Manual
Section 3 - Configuration
Set the transmit power of the antennas.
Beacons  are  packets  sent  by  an  Access  Point  to 
synchronize  a  wireless  network.  Specify  a  value. 
100 is the default setting and is recommended. 
This  value  should  remain  at  its  default  setting  of 
2432. If inconsistent data flow is a problem, only a 
minor modification should be made.
The  fragmentation  threshold,  which  is  specified 
in  bytes,  determines  whether  packets  will...

D-Link DIR-635 User Manual
Section 3 - ConfigurationUPnP
Internet Ping Block
Internet Port Speed
Multicast Streams
To  use  the  Universal  Plug  and  Play  (UPnP™) 
f e a t u r e   c l i c k   o n  E n a b l e d.   U P N P   p r o v i d e s 
compatibility with networking equipment, software 
and peripherals.
Unchecking the box will not allow the DIR-635 to 
respond to pings. Blocking the Ping may provide 
some extra security from hackers. Check the box 
to allow the Internet port to be...

5D-Link DIR-635 User Manual
Section 3 - ConfigurationChange Password
Remote Management
Enter  a  new  password  for  the  Administrator  Login  Name. 
The administrator can make changes to the settings.
Enter the new password for the User login. If you login as 
the User, you can only see the settings, but cannot change 
them.
Enter a name for the DIR-635 router.
Remote management allows the DIR-635 to be configured 
from  the  Internet  by  a  web  browser.  A  username  and 
password is still...

6D-Link DIR-635 User Manual
Section 3 - Configuration
Time Settings
Select  the  Time  Zone  from  the  drop-down 
menu.
To select Daylight Saving time manually, select 
enabled or disabled, and enter a start date and 
an end date for daylight saving time.
NTP  is  short  for  Network  Time  Protocol.  NTP 
synchronizes computer clock times in a network 
of  computers.  Check  this  box  to  use  a  NTP 
server. This will only connect to a server on the 
Internet, not a local server.
Enter  the...

D-Link DIR-635 User Manual
Section 3 - Configuration
SysLog
The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs 
to a SysLog server on your network.
Enable Logging to 
SysLog Server:
SysLog Server IP 
Address:
Check  this  box  to  send  the  router  logs  to  a 
SysLog Server.
The address of the SysLog server that will be 
used  to  send  the  logs.  You  may  also  select 
your computer from the drop-down menu (only 
if...

D-Link DIR-635 User Manual
Section 3 - Configuration
Email Settings
The Email feature can be used to send the system log files, router alert messages, and firmware update notification 
to your email address. 
Enable Email 
Notification: 
From Email 
Address:
To Email Address:
SMTP Server 
Address:
Enable 
Authentication:
Account Name:
Password:
On Log Full:
On Schedule:
Schedule:
When this option is enabled, router activity logs 
are e-mailed to a designated email address.
This  email  address...

D-Link DIR-635 User Manual
Section 3 - Configuration
Use  this  option  to  save  the  current  router 
configuration settings to a file on the hard disk 
of  the  computer  you  are  using.  First,  click  the 
Save  button.  You  will  then  see  a  file  dialog, 
where you can select a location and file name 
for the settings. 
Use  this  option  to  load  previously  saved 
router  configuration  settings.  First,  use  the 
Browse  control  to  find  a  previously  save  file 
of...

50D-Link DIR-635 User Manual
Section 3 - Configuration
Click on Check Online Now for Latest Firmware 
Version to find out if there is an updated firmware; 
if  so,  download  the  new  firmware  to  your  hard 
drive.
After  you  have  downloaded  the  new  firmware, 
click Browse  to  locate  the  firmware  update  on 
your  hard  drive.    Click Upload  to  complete  the 
firmware upgrade.
Check Automatically Check Online for Latest 
Firmware  Version  to  have  the  router  check 
automatically  to...