D-Link Router DIR-600 User Manual

41
D-Link DIR-600 User Manual
Section 3 - Configuration
To  use  the  Universal  Plug  and  Play  (UPnP
™) 
f e a t u r e   t i c k   t h i s   c h e c k b o x .   U P N P   p r o v i d e s 
compatibility with networking equipment, software 
and peripherals.
Unchecking  the  box  will  not  allow  the  DIR-600  to 
respond  to  Pings.  Blocking  the  Ping  may  provide 
s o m e   e x t r a   s e c u r i t y   f r o m   h a c k e r s .   T i c k   t h i s 
checkbox to allow the WAN port to be “Pinged”....

42
D-Link DIR-600 User Manual
Section 3 - Configuration
Ti c k   t h i s   c h e c k b ox   to   e n a b l e   o r   d i s a b l e   f i xe d 
routes to defined destinations.
Use  the  drop-down  menu  to  choose  the  WAN  or 
WAN  (Physical  Port)  Interface  the  IP  packet  must 
use to transit out of the Router.
The  IP  address  of  the  packets  that  will  take  this 
route.
The  subnet  of  the  IP  address  of  the  packets  that 
will take this route.
Specifies  the  next  hop  to  be  taken...

43
D-Link DIR-600 User Manual
Section 3 - Configuration
Enter a new Login Name for the Administrator account.
Enter  a  new  password  for  the  Administrator  Login  Name 
and  then  retype  the  new  password  in  the  Confirm  Password 
t e x t b o x .   T h e   a d m i n i s t r a t o r   c a n   m a k e   c h a n g e s   t o   t h e 
settings.
Remote  management  allows  the  DIR-600  to  be  configured 
f ro m   t h e   I n t e r n e t   by   a   we b   b row s e r.   A   u s e r n a m e   a n d...

44
D-Link DIR-600 User Manual
Section 3 - Configuration
Save	and	Restore
U s e   t h i s   o p t i o n   t o   s a v e   t h e   c u r r e n t   r o u t e r 
configuration settings to a file on the hard disk of the 
computer you are using. First, click the  Save button. 
You  will  then  see  a  file  dialog,  where  you  can  select 
a location and file name for the settings. 
Use  this  option  to  load  previously  saved  router 
configuration  settings.  First,  use  the  Browse 
control to find a...

45
D-Link DIR-600 User Manual
Section 3 - Configuration
Firmware Update
Click  the  Check  Now  button  (or  the  link  at  the  top 
of  the  window)  to  find  out  if  there  is  an  updated 
firmware;  if  so,  download  the  new  firmware  to  your 
hard drive.
Af ter  you  have  downloaded  the  new  fir mware, 
click  Browse  in  this  window  to  locate  the  firmware 
update  on  your  hard  drive.    Click  Save	Settings  to 
complete the firmware upgrade.
Firmware 
Upgrade:
Browse:
You  can...

46
D-Link DIR-600 User Manual
Section 3 - Configuration
DDNS	Setting
Tick  the  Enable  DDNS  checkbox  to  enable  support 
for DDNS.
Select  one  of  the  DDNS  registration  organizations 
form  those  listed  in  the  pull-down  menu.  Available 
servers  include  dlinkddns.com(Free),  DynDns.
org(Custom),  Dyn.Dns.org(free),  and Dyn.Dns.
org(Static).
Enter the host name of the DDNS server.
Enter  the  username  given  to  you  by  your  DDNS 
server.
Enter  the  password  or  key  given  to  you...

47
D-Link DIR-600 User Manual
Section 3 - Configuration
System Check
VCT  is  an  advanced  feature  that  integrates  a 
LAN  cable  tester  on  ever y  Ethernet  port  on  the 
router.  Through  the  graphical  user  interface 
(G U I ) ,   V C T   c a n   b e   u s e d   to   re m o te l y   d i a gn o s e 
and  repor t  cable  faults  such  as  opens,  shor ts, 
swaps,  and  impedance  mismatch.  This  feature 
significantly  reduces  service  calls  and  returns  by 
allowing  users  to  easily...

48
D-Link DIR-600 User Manual
Section 3 - Configuration
Schedules
Enter a name for the new schedule rule.
C h o o s e   t h e   d e s i re d   d ay ( s ) ,   e i t h e r   A l l   We e k   o r 
Select  Days.  If  the  latter  is  selected,  please  use  the 
checkboxes  directly  below  to  specify  the  individual 
days.
Tick  this  check  box  if  the  new  schedule  rule  applies 
to the full 24-hour period.
If  the  new  schedule  rule  does  not  apply  to  the  full 
24-hour  period,  untick  the...

49
D-Link DIR-600 User Manual
Section 3 - Configuration
Log Settings
Click  on  the  Save  button  link  on  this  window  to 
save the log file to your local hard drive.
click  the  checkbox  to  save  the  log  in  the  log  server 
in the LAN side.
Click the checkbox(es) of the type of log information 
requested:  “System, Firewall & Security, Router 
Status, Critical, Warning and Information”
Enter  the  your  SNTP  server  name(or  IP  address) 
and  enter  your  mail  address  before  sending  your...

50
D-Link DIR-600 User Manual
Section 3 - Configuration
Device	Info
T h i s   w i n d o w   d i s p l a y s   t h e   c u r r e n t   i n f o r m a t i o n   f o r   t h e   D I R - 6 0 0 .   I t   w i l l   d i s p l a y   t h e   L A N ,   WA N ,   a n d   Wi r e l e s s 
information.
If  your  WAN  connection  is  set  up  for  a  Dynamic  IP  address  then  a  DHCP Release  button  and  a  DHCP Renew  button 
will be displayed. Use DHCP	Release to disconnect from your ISP and use DHCP	Renew to...