Home > D-Link > Router > D-Link Router DIR-300 User Manual

D-Link Router DIR-300 User Manual

Here you can view all the pages of manual D-Link Router DIR-300 User Manual. The D-Link manuals for Router are available online for free. You can easily download all the documents as PDF.

Page 41

1D-Link DIR-300 User Manual
Section 3 - Configuration
Tick this checkbox to enable or disable fixed routes 
to defined destinations. 
Use  the  drop-down  menu  to  choose  the WAN  or 
WAN (Physical Port) Interface the IP packet must 
use to transit out of the Router.  
The  IP  address  of  the  packets  that  will  take  this 
route.
The  subnet  of  the  IP  address  of  the  packets  that 
will take this route.
Specifies  the  next  hop  to  be  taken  if  this  route  is 
used. 
Enable:...

Page 42

D-Link DIR-300 User Manual
Section 3 - Configuration
Enter  a  new  Login  Name  for  the  Administrator 
account.
Enter  a  new  password  for  the Administrator  Login 
Name  and  then  retype  the  new  password  in  the 
Confirm  Password  textbox.  The  administrator  can 
make changes to the settings.
Remote  management  allows  the  DIR-300  to  be 
configured  from  the  Internet  by  a  web  browser.  A 
username  and  password  is  still  required  to  access 
the  Web-Management...

Page 43

3D-Link DIR-300 User Manual
Section 3 - Configuration
Save and Restore
Use this option to save the current router configuration 
settings to a file on the hard disk of the computer you 
are using. First, click the Save button. You will then 
see a file dialog, where you can select a location and 
file name for the settings. 
Use  this  option  to  load  previously  saved  router 
configuration settings. First, use the Browse control 
to find a previously save file of configuration settings. 
Then,...

Page 44

D-Link DIR-300 User Manual
Section 3 - Configuration
Firmware Update
Click the Check Now button (or the link at the top 
of  the  window)  to  find  out  if  there  is  an  updated 
firmware; if so, download the new firmware to your 
hard drive.
After you have downloaded the new firmware, click 
Browse in this window to locate the firmware update 
on your hard drive.  Click Save Settings to complete 
the firmware upgrade.
Firmware 
Upgrade:
Browse:
You can upgrade the firmware of the Router...

Page 45

D-Link DIR-300 User Manual
Section 3 - Configuration
DDNS Setting
Tick the Enable DDNS checkbox to enable support 
for DDNS.
Select one of  the DDNS  registration organizations 
form those listed in the pull-down menu. Available 
servers  include dlinkddns.com(Free),  DynDns.
org(Custom),  Dyn.Dns.org(free), and Dyn.Dns.
org(Static).
Enter the host name of the DDNS server.
Enter  the  username  given  to  you  by  your  DDNS 
server.
Enter  the  password  or  key  given  to  you  by  your...

Page 46

6D-Link DIR-300 User Manual
Section 3 - Configuration
System Check
VCT is an advanced feature that integrates a LAN 
cable  tester  on  every  Ethernet  port  on  the  router. 
Through the graphical user interface (GUI), VCT 
can be used to remotely diagnose and report cable 
faults such as opens, shorts, swaps, and impedance 
mismatch.  This  feature  significantly  reduces 
service calls and returns by allowing users to easily 
troubleshoot their cable connections.
The Ping Test is used to send...

Page 47

D-Link DIR-300 User Manual
Section 3 - Configuration
Schedules
Enter a name for the new schedule rule.
Choose  the  desired  day(s),  either  All  Week  or 
Select Days. If the latter is selected, please use the 
checkboxes directly below to specify the individual 
days.
Tick this check box if the new schedule rule applies 
to the full -hour period.
If  the  new  schedule  rule  does  not  apply  to  the  full 
-hour  period,  untick  the  previous  checkbox  and 
then...

Page 48

8D-Link DIR-300 User Manual
Section 3 - Configuration
Log Settings
Click on the Save button link on this window to save 
the log file to your local hard drive.
Tick the checkbox(es) of the type of log information 
requested:  System  Activity,  Debug  Information, 
Attacks, Dropped Packets, and Notice.
Save Log File:
Log Type:
The system log displays chronological event log data specified by the router user. You may also save a simple text file containing 
the log to your computer. Click the Save...

Page 49

D-Link DIR-300 User Manual
Section 3 - Configuration
Device Info
This window displays the current information for the DIR-300. It will di\
splay the LAN, WAN, and Wireless information.
If  your WAN  connection  is  set  up  for  a  Dynamic  IP  address  then  a DHCP Release  button  and  a DHCP Renew  button  will  be 
displayed. Use DHCP ReleaseRelease to disconnect from your ISP and use DHCP RenewRenew to connect to your ISP. 
If your WAN connection is set up for PPPoE, a Connect button and...

Page 50

0D-Link DIR-300 User Manual
Section 3 - Configuration
Log
First Page:
Last Page:
Previous:
Next:
Clear:
Link to Log 
Settings:
View the first page of the log.
View the last page of the log.
View the previous page.
View the next page.
Clear the log.
Click this button to go directly to the Log Settings 
window (Maintenance > Log Settings).
This  window  allows  you  to  view  a  log  of  activities  on  the  Router.  This  is  especially  helpful  detecting  unauthorized  network 
usage. 
Start reading D-Link Router DIR-300 User Manual

Related Manuals for D-Link Router DIR-300 User Manual

All D-Link manuals