D-Link Router DIR-300 User Manual

1D-Link DIR-300 User Manual
Section 3 - Configuration
Select Dynamic (most common) or Static. Select Static if 
your ISP assigned you the IP address, subnet mask, gateway, 
and DNS server addresses.
Enter the IP address (Static PPTP only).
Enter  the  Primary  and  Secondary  DNS  Server  Addresses 
(Static PPTP only).
Enter the Gateway IP Address provided by your ISP.
The  DNS  server  information  will  be  supplied  by  your  ISP 
(Internet Service Provider.)
Enter the Server IP provided by your...

D-Link DIR-300 User Manual
Section 3 - Configuration
Select Dynamic (most common) or Static. Select Static if your 
ISP  assigned  you  the  IP  address,  subnet  mask,  gateway,  and 
DNS server addresses.
Enter the IP address (Static L2TP only).
Enter the Primary and Secondary DNS Server Addresses (Static 
L2TP only).
Enter the Gateway IP Address provided by your ISP.
The DNS server information will be supplied by your ISP (In-
ternet Service Provider.)
Enter the Server IP provided by your...

3D-Link DIR-300 User Manual
Section 3 - Configuration
Enter your Big Pond user name.
Enter your Big Pond password and then retype the 
password in the next box.
Enter the IP address of the login server.
Enter the IP address of the login server.
The  default  MAC  Address  is  set  to  the  WAN’s 
physical interface MAC address on the Broadband 
Router. It is not recommended that you change the 
default MAC address unless required by your ISP.
The  default  MAC  address  is  set  to  the  WAN’s...

D-Link DIR-300 User Manual
Section 3 - Configuration
Enter the IP address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
The default MAC Address is set to the WAN’s physical 
interface MAC address on the Broadband Router. It is 
not  recommended  that  you  change  the  default  MAC 
address unless required by your ISP.
The default MAC address is set to the WAN’s physical 
interface MAC address on the Broadband Router. You 
can use the...

D-Link DIR-300 User Manual
Section 3 - Configuration
Wireless Setup
Wireless  settings  for  the  router  may  be  configured 
manually or by using a wizard. To use the wizard, click 
the Wireless Connection Setup Wizard button and then 
follow the steps that are described below. To configure the 
wireless  settings  manually,  click  the Manual  Wireless 
Connection Setup button. The parameters for this window 
are described later in this section. The Wireless Security 
section  that...

6D-Link DIR-300 User Manual
Section 3 - Configuration
Use the radio buttons to select the desired level of wireless security, Best, 
Better, or Good, and then click Next to continue.
Enter a Wireless Security Password in the textbox and then click Next to 
continue.
This window displays a summary of your wireless security settings. Please print this 
out or record this information in a safe place and then click Save to continue.
The Router will save your new settings and reboot. When it is finished...

D-Link DIR-300 User Manual
Section 3 - Configuration
To implement Wi-Fi protection, or WCN 2.0, tick the 
Enable  checkbox,  click  either Generate  New  PIN 
or Reset PIN to Default, and then configure the Wi-
Fi  settings  below.  Please  see  the  Setting  Up  Wi-Fi 
Protection (WCN 2.0 in Windows Vista) section later 
in this manual for detailed configuration information. 
Check the box to enable the wireless function. If you 
do not want to use wireless, uncheck the box to disable 
all...

8D-Link DIR-300 User Manual
Section 3 - Configuration
1. To enable wireless security on the Router, use the drop-
down menu to select the desired option. To enable WEP, 
select Enable WEP Wireless Security (basic).
2. Next to Authentication, select either Open   or Shared 
Key. Shared Key provides greater security.
3. Select either 64Bit or 128Bit encryption from the drop-
down menu next to WEP Encryption. 
4. Next to Default Key Type, select WEP Key 1 and enter 
a WEP key that you create. Make...

D-Link DIR-300 User Manual
Section 3 - Configuration
1. To enable WPA, WPA2, or WPA/WPA2, select either 
Enable WPA Only Wireless Security (enhanced), Enable 
WPA2  Only  Wireless  Security  (enhanced), or Enable 
WPA/WPA2 Wireless Security (enhanced).
2. Next to Cipher Type, select TKIP, AES, or Both.
3. Next to PSK/EAP, select PSK.
4. N e x t   t o  N e t w o r k   K e y,   e n t e r   a 
p a s s p h r a s e .   T h e   k e y   i s   a n   a l p h a - n u m e r i c  
password  between  8...

30D-Link DIR-300 User Manual
Section 3 - Configuration
1. To enable WPA, WPA2, or WPA/WPA2 for a RADIUS 
server,  next  to Security  Mode,  select Enable  WPA 
Only Wireless Security (enhanced), Enable WPA2 Only 
Wireless  Security  (enhanced), or  Enable  WPA/WPA2 
Wireless Security (enhanced).
2. Next to Cipher Type, select TKIP, AES, or Auto.
3. Next to PSK/EAP, select EAP.
4. Next  to RADIUS  Server  1  enter  the IP Address  of 
your RADIUS server.
5. Next  to Port,  enter  the  port  you  are...