D-Link Dir655 B1 Manual

67D-Link DIR-655 User Manual
Section 3 - Configuration
Application Level Gateway Configuration
Here you can enable or disable ALG’s. Some protocols and applications require special handling of the IP payload to make them work with network 
address translation (NAT ). Each ALG provides special handling for a specific protocol or application. A number of ALGs for common applications 
are enabled by default.
Allows multiple machines on the LAN to connect to their corporate network using PPTP protocol....

68D-Link DIR-655 User Manual
Section 3 - Configuration
Enter the IP address of packets that will take this 
route.
Enter  the  netmask  of  the  route,  please  note 
that  the  octets  must  match  your  destination  IP 
address.
Enter your next hop gateway to be taken if this 
route is used.
The  route  metric  is  a  value  from  1  to  16  that 
indicates the cost of using this route. A value 1 is 
the lowest cost and 15 is the highest cost. 
Select the interface that the IP packet must use to...

69D-Link DIR-655 User Manual
Section 3 - Configuration
Set the transmit power of the antennas.
Beacons  are  packets  sent  by  an  Access  Point  to 
synchronize a wireless network. Specify a value. 100 
is the default setting and is recommended. 
This  value  should  remain  at  its  default  setting  of 
2432.  If  inconsistent  data  flow  is  a  problem,  only  a 
minor modification should be made.
The  fragmentation  threshold,  which  is  specified 
in  bytes,  deter mines  whether  packets  will...

70D-Link DIR-655 User Manual
Section 3 - Configuration
WISH is short for Wireless Intelligent Stream Handling, a technology developed to enhance your experience of using a wireless network by prioritizing 
the traffic of different applications. 
Enable this option if you want to allow WISH to 
prioritize your traffic. 
Enable WISH:
Allows  the  router  to  recognize  HTTP  transfers 
for many common audio and video streams and 
prioritize them above other traffic. Such streams 
are frequently used by...

71D-Link DIR-655 User Manual
Section 3 - Configuration
Wi-Fi Protected Setup (WPS)
Enable the Wi-Fi Protected Setup feature. 
Locking the wireless security settings prevents the settings from 
being changed by the Wi-Fi Protected Setup feature of the router. 
Devices can still be added to the network using Wi-Fi Protected 
Setup. However, the settings of the network will not change once 
this option is checked.
A PIN is a unique number that can be used to add the router to 
an existing network or to...

72D-Link DIR-655 User Manual
Section 3 - Configuration
To use the Universal Plug and Play (UPnP™) feature 
click  on Enabled.  UPNP  provides  compatibility 
with  net work ing  equipment,  sof t ware  and 
peripherals.
Unchecking the box will not allow the DIR-655 to 
respond to pings. Blocking the Ping may provide 
some extra security from hackers. Check the box 
to allow the Internet port to be “pinged”.
You  may  set  the  por t  speed  of  the  Internet 
port  to  10Mbps,  100Mbps,  1000Mbps,  or...

73D-Link DIR-655 User Manual
Section 3 - Configuration
Guest Zone
Check to enable the Guest Zone feature. 
The schedule of time when the Guest Zone will 
be  active.  The  schedule  may  be  set  to  Always, 
which will allow the particular service to always 
be enabled. You can create your own times in the 
Tools > Schedules section.
Enter  a  wireless  network  name  (SSID)  that  is 
different from your main wireless network.
Check  to  allow  network  connectivity  between 
the different zones...

74D-Link DIR-655 User Manual
Section 3 - Configuration
IPv6 Firewall
The DIR-655’s IPv6 Firewall feature allows you to configure which kind of IPv6 traffic is allowed to pass through the device. The DIR-655’s IPv6 Firewall 
functions in a similar way to the IP Filters feature.
Check the box to enable the IPv6 firewall simple security.
Select an action from the drop-down menu.
Enter a name to identify the IPv6 firewall rule.
Use the drop-down menu to select the time schedule that 
the IPv6 Firewall Rule...

75D-Link DIR-655 User Manual
Section 3 - Configuration
IPv6 Routing
Check the box next to the route you wish to enable. 
Enter a specific name to identify this route.
This  is  the  IP  address  of  the  router  used  to  reach  the 
specified  destination  or  enter  the  IPv6  address  prefix 
length of the packets that will take this route. 
Enter the metric value for this rule here.
Use  the  drop-down  menu  to  specify  if  the  IP  packet 
must  use  the  WAN  or  LAN  interface  to  transit  out...

76D-Link DIR-655 User Manual
Section 3 - Configuration
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that 
can  access  the  management  interface  through  the  web  browser. The  accounts  are  admin  and  user.  Admin  has  read/write  access  while  user  has 
read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both...