D-Link Dir 600m Instalation Manual

21
D-Link DIR-600 User Manual
Section 3 - Coniguration
Select Dynamic   (most  common)  or  Static.  Select  Static  if  your 
ISP  assigned  you  the  IP  address,  subnet  mask,  gatew ay,  and 
DNS server addresses. 
Enter your PPPoE user name.
Enter  your  PPPoE  password  and  then  retype  the  passw ord  in 
the next box.
Enter the ISP Service Name (optional).
Enter the IP address (Static PPPoE only).
Enter  the  Primary  and  Secondary  DNS  Server  Addresse s  (Static 
PPPoE only).
Enter a...

22
D-Link DIR-600 User Manual
Section 3 - Coniguration
Select Dynamic   (most  common)  or  Static.  Select  Static  if 
your  ISP  assigned  you  the  IP  address,  subnet  mask,  g ateway, 
and DNS server addresses. 
Enter the IP address (Static PPTP only).
Enter  the  Pr imar y  and  S econdar y  DNS  S er ver  Addresse s 
(Static PPTP only).
Enter the Gateway IP Address provided by your ISP.
The  DNS  ser ver  information  will  be  supplied  by  your   ISP 
(Internet Service Provider.)
Enter the...

23
D-Link DIR-600 User Manual
Section 3 - Coniguration
Select Dynamic   (most  common)  or  Static.  Select  Static 
i f   yo u r   I S P   a s s i g n e d   yo u   t h e   I P   a d d re s s,   s u b n e t   m a s k , 
gateway, and DNS server addresses. 
Enter the IP address (Static L2TP only).
Enter  the  Primar y  and  Secondar y  DNS  Ser ver  Addresse s 
(Static L2TP only).
Enter the Gateway IP Address provided by your ISP.
The  DNS  ser ver  information  will  be  supplied  by  your   ISP...

24
D-Link DIR-600 User Manual
Section 3 - Coniguration
Internet Setup
Dual฀Access฀(for฀Russia฀only)
There  are  two  main  steps  to  configure  a  Dual  Access   Internet  connection  for  Russia.  First,  configure  a  PPPoE  connection  (as  previously 
described  for  PPPoE  connections),  and  add  the  physi cal  WAN  IP  settings  as  instructed  from  the  ISP.  Second,  conigure  a  PPTP  connection 
(as  previously  described  for  PPTP  connections).  In  addition,  the  second  step  also...

25
D-Link DIR-600 User Manual
Section 3 - Coniguration
Wireless Setup
Wireless  settings  for  the  router  may  be  configured  
manually  or  by  using  a  wizard.  To  use  the  wizard, 
click the  Wireless฀Connection฀Setup฀Wizard  button 
and  then  follow  the  steps  that  are  described  below. 
To  configure  the  wireless  settings  manually,  click 
the  Manual  Wireless  Connection  Setup  button. 
The  parameters  for  this  window  are  described  later 
in  this  section.  The  Wireless...

26
D-Link DIR-600 User Manual
Section 3 - Coniguration 
Enter  a  Wireless  Security  Password  in  the  tex tbox  a nd  then  click 
Next  to continue.
This  window  displays  a  summary  of  your  wireless  security  settings.  
Please  print  this  out  or  record  this  information  in   a  safe  place  and 
then click  Save to continue.
The  Router  will  save  your  new  settings  and  reboot.  W hen  it  is  inished 
after 1-2 minutes, the opening Wireless Setup window is displayed.    

27
D-Link DIR-600 User Manual
Section 3 - Coniguration
To  implement  Wi-Fi  protection,  or  WCN  2.0,  tick  the   Enable 
checkbox,  click  either  Generate  New  PIN or Reset  PIN  to 
Default ,  and  then  conigure  the Wi-Fi  settings  below.  Please 
see  the  Setting  Up  Wi-Fi  Protection  ( WCN  2.0  in  Win dows 
Vista)  section  later  in  this  manual  for  detailed  co niguration 
information.  
Check  the  box  to  enable  the  wireless  function.  If  y ou  do 
not  want  to  use...

28
D-Link DIR-600 User Manual
Section 3 - Coniguration 1.  To  enable  wireless  security  on  the  Router,  use 
the  drop-down  menu  to  select  the  desired  option.  
To  enable  WEP,  select  E n a b l e   W E P   W i r e l e s s 
Security (basic).
2.   Next  to  Authentication ,  select  either O p e n   
or  Shared  Key .   S h a r e d   K e y   p r o v i d e s   g r e a t e r 
security.
3.   Select  either  64Bit  or  128Bit   encryption  from  the 
drop-down menu next to  WEP Encryption. 
4....

29
D-Link DIR-600 User Manual
Section 3 - Coniguration 1.  To  enable  Enable  WPA/WPA2  Wireless  Security 
(enhanced).
2.   Next  to  Cipher  Type ,  select  TKIP,  AES ,  or  
AUTO.
3.  Next to  PSK/EAP , select PSK.
4.  Next to  Network Key , enter a passphrase. The key 
is an alpha-numeric   
password between 8 and 63 characters long. 
The password can include symbols (!?*&_) and 
spaces. Make sure you enter this key exactly 
the same on all other wireless clients.
5.   Click  Save฀ Settings   to...

30
D-Link DIR-600 User Manual
Section 3 - Coniguration 1.  To  enable  WPA/WPA2  for  a  RADIUS  ser ver,  next 
to  Security  Mode ,  selec  or Enable  WPA/WPA2 
Wireless Security (enhanced).
2.   Next  to  Cipher  Type ,  select  TKIP,  AES ,  or  
Auto.
3.  Next to  PSK/EAP , select EAP.
4.  Next  to  RADIUS฀ Server฀ 1   enter  the IP  Address  
of your RADIUS server.
5.  Next to  Port, enter the port you are using with your 
RADIUS server. 1812 is the default port.
6.  Next to  Shared Secret , enter...