D-Link Di624 A Manual

41
Please follow all the instructions in this window:
Networking Basics
Click Next
In the following window, select the best description of your computer. If your computer
connects to the internet through a gateway/router, select the second option as shown.
Click Next 

42
Enter a Computer description and a Computer name (optional.)
Networking Basics
Click Next
Enter a Workgroup name.  All computers on your network should have the same
Workgroup name.
Click Next 

43
Please wait while the Network Setup Wizard applies the changes.
Networking Basics
When the changes are complete, click Next.
Please wait while the Network Setup Wizard configures the computer.
This may take a few minutes. 

44 Networking Basics
In the window below, select the option that fits your needs. In this example, Create a
Network Setup Disk has been selected.  You will run this disk on each of the
computers on your network. Click Next.
Insert a disk into the Floppy Disk Drive, in this case drive A.
Click Next. 

45 Networking Basics
Please read the information under Here’s how in the screen below.  After you complete
the Network Setup Wizard you will use the Network Setup Disk to run the Network
Setup Wizard once on each of the computers on your network. To continue click Next. 

46 Networking Basics
Please read the information on this screen, then click Finish to complete the
Network Setup Wizard.
The new settings will take effect when you restart the computer. Click Ye s to restart
the computer.
You have completed configuring this computer. Next, you will need to run the Network
Setup Disk on all the other computers on your network. After running the Network
Setup Disk on all your computers, your new wireless network will be ready to use. 

47 

48
Networking Basics
Naming your Computer

49 Networking Basics
Checking the IP Address in 
Windows XP
This  window will appear.
Click the
Support tab
Click Close

50 Networking Basics
Assigning a Static IP Address in 
Windows XP/2000