D-Link Di624 A Manual

31
Using the Configuration Menu (continued)
Tools> Admin
At this page, the DI-624 administrator can change the system password. There are two
accounts that can access the Broadband Router’s Web-Management interface. They
are admin and user. Admin has read/write access while user has read-only access. User
can only view the settings but cannot make any changes.
Remote Management- Remote management allows the DI-624 to be configured from
the Internet by a web browser. A username and password is still...

32
Using the Configuration Menu (continued)
Tools > Time
Time Zone-
Select the Time Zone from the pull-down menu.
Daylight
Saving-To select Daylight Saving time manually, select enabled or dis-
abled, and enter a start date and an end date for daylight saving
time.
Set the Time-To manually input the time, enter the values in these fields for
the Year, Month, Day, Hour, Minute, and Second. Click Set Time.
Default
NTP Server-
NTP is short for Network Time Protocol. NTP synchronizes com-
puter clock times...

33
Using the Configuration Menu (continued)
Tools > System
The current system settings can be saved as a file onto the local hard drive. The saved
file or any other saved setting file can be loaded back on the Broadband Router. To reload
a system settings file, click on Browse to browse the local hard drive and locate the
system file to be used. You may also reset the Broadband Router back to factory set-
tings by clicking on Restore.
Click Save to save the current settings to the local Hard Drive
Click...

34
Using the Configuration Menu (continued)
Tools > Firmware
You can upgrade the firmware of the Router here. Make sure the firmware you want to
use is on the local hard drive of the computer. Click on Browse to browse the local hard
drive and locate the firmware to be used for the update. Please check the D-Link support
site for firmware updates at http://support.dlink.com. You can download firmware up-
grades to your hard drive from the D-Link support site.
Firmware Upgrade-
Browse-Click on the link in...

35
Using the Configuration Menu (continued)
Tools > Misc
Ping Test-
Restart
Device-
Block
WAN
Ping-
Discard Ping from
WAN side-
VPN
Pass
Through-
PPTP- select Enabled or Disabled
IPSec- select Enabled or Disabled The Ping Test is used to
send Ping packets to test if
a computer is on the
Internet. Enter the IP Ad-
dress that you wish to Ping,
and click Ping
If you choose to block WAN
Ping, the WAN IP Address
of the DI-624 will not respond
to pings. Blocking the Ping
may provide some extra se-
curity from...

36
Using the Configuration Menu (continued)
Status > Device Info
This page displays the current information for the DI-624. It will display the LAN, WAN
and MAC address information.
If your WAN connection is set up for a Dynamic IP address then a Release button and
a Renew button will be displayed. Use Release to disconnect from your ISP and use
Renew to connect to your ISP.
If your WAN connection is set up for PPPoE, a Connect button and a Disconnect button
will be displayed. Use Disconnect to drop the...

37
The Broadband Router keeps a running log of events and activities occurring on the
Router. If the device is rebooted, the logs are automatically cleared. You may save the log
files under Log Settings.
Using the Configuration Menu (continued)
Status > Log
View Log-
DI-754
First Page - The first page of the log
Last Page - The last page of the log
Previous - Moves back one log page
Next - Moves forward one log page
Clear - Clears the logs completely
Log Settings - Brings up the page to configure the log 

38
Using the Configuration Menu (continued)
Status > Log > Log Settings
Not only does the Broadband Router display the logs of activities and events, it can setup
to send these logs to another location.
 The address of the SMTP server that will be used to send the logs
The email address to which the logs will be sent.
Click on Send Mail Now to send the email.
SMTP Server/
IP Address -
Email Address - 

39
Status > Wireless
Using the Configuration Menu (continued)
Status > Stats
The screen above displays theTraffic Statistics. Here you can view the amount of pack-
ets that pass through the DI-624 on both the WAN and the LAN ports. The traffic counter
will reset if the device is rebooted.
The wireless client table displays a list of current connected wireless clients. This
table also displays the connection time and MAC address of the connected wireless
client.
Click on Help at any time, for more...

40 Using the Network Setup Wizard in Windows XP
In this section you will learn how to establish a network at home or work, using
Microsoft Windows XP.
Note:  Please refer to websites such as 
http://www.homenethelp.com
and 
http://www.microsoft.com/windows2000  for information about networking
computers using Windows 2000, ME or 98.
Go to Start>Control Panel>Network Connections
Select Set up a home or small office network
Networking Basics
When this screen appears, Click Next.