Creative Studio 6 Manual

							Quick Ref Restart271
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 271   |  Page Quick Reference Sheets
 
5.16 Quick Ref Restart
Feature: Restart  
 
Restarts are needed for a variety of reasons. Either the thread break sensor stops the
machine or the machine is stopped by the quilter or an obstacle.
1A. Thread Break : If the machine stopped because it detected a thread break, the pop-up
box offers an  Auto Restart
 option, so press that button.  The machine head moves to
where CS detected the thread break.
1B. Manual Stop : If the machine was stopped for any other reason, click the  Restart
Quilting Icon.  The sewing head goes back to the spot where it detected the  ‘Stop ’
command. 
2 . CS asks if you want to confirm or move the Restart Point. If the stitcher is close to the
right spot, use  Back
 and/or  Forward
 to move the sewing head 7 stitches at a time until the
sewing head is positioned properly.  Press Quilt
 when ready, and continue to sew. 
3.  Because there is a delay between the thread breaking and the sensor stopping the
machine, the Restart Point probably needs to be moved. Press “ PickNewPoint
” to release
the sewing head so you can move it to a different spot. The new point can be identified
using the stitcher or the computer screen. 
3A.  To find the restart point 
using the sewing head  -  move the machine until the needle is
just above the point where you want to continue stitching.  Press “Use This Pt
” on the
keypad. CS moves to the closest stitch and waits for another response. If it looks good,
Press Quilt  and continue to sew. If not, try again by pressing “ Use This Pt
” until the right
spot is found.
3B.  To find the restart point
 using the computer screen  - look at the image on the screen
and find the crosshair mark - it is a long, skinny blue plus “+” sign. Zoom in and out using
the roller on the mouse. Find the spot on the screen that corresponds to the restart point on
the quilt, and click that spot with the mouse. The blue crosshair will move to this location on
the screen and the stitcher will move to that location on the quilt.
4.  When ready,  press Quilt
, and continue to sew. 
Copyright © 2015 Gammill, Inc. | All Rights Reserved
Statler Stitcher® and CreativeStudio® are registered trademarks of Gammill, Inc 
						

							272
Getting Started with CreativeStudio®
Index - . - .csq file extension     74
.csqx file extension     74
.pat file extension     74
- 3 - 3-point arc     153
- A - Absolute height     93
Absolute length     93
Absolute width     93
Active Screen     64
Add New Text Fonts     105
Add pattern     48
Add Pattern Icon     48, 82
Add Quilt Group icon     49, 70
Add Text Fonts     24
Adjusting patterns     88, 100
Adjustments     200, 212, 215
Advance and Continue Icon     40
Alternating type     96
Anchor point for boundary     85
Anchor Types     43
Angle of rotation     93
Applique background     200, 221
applique boundary     121, 128, 130
Apply Icon     46
Apply Pattern     46, 258
Apply Pattern - About     114
Apply Pattern Icon     46
Apply Pattern limitations     114
Arc nodes     75, 88, 116
Array Number of copies     111
Array Pattern     46
Array rotation angle     111
Audition design over image     101
Auto Laser     164
Auto Restart     228
Auto Toggle As Unsewn     164
Automatic resize     82 - B -
Back     228
Back 7 stitches     228, 230
Background fill pattern     121, 130, 221
background filler pattern     122
Background filler patterns     225
Background fillers     200, 221
Background pattern     128
Backgrounds     200, 221
Baseline     85, 86, 149, 177, 200, 215
Baseline for boundary     85
Baste - How To     168
Baste Icon     42
Baste settings     Angle     168
Channel Lock     168
Flip Angle     168
Needle Position     168
Radiating Lines     168
Record     168
Shift     168
Single Stitch     168
Start     168
Stitches Per Inch     168
Basting     168
Belts     Disengaged belts     160
Engaged Belts     160
Belts disengaged     170
Black pattern image     228, 230
Block boundary     225
Block Perimeter boundary     121
Blue Filter     101
Blue Square handles     88, 146
Bobbin (pull up on keypad)     61
Bobbin Pullup     96, 200, 212, 215
Bobbin refill     230
Bobbin Stitch     164
Border     246
Border Corner Icon     41, 190
Border Corner settings     54, 190
Border Settings     Connect     54
Margin     54
Quilt Length     54
Border/corner     246
Borders     190
Boundaries     82 
						

							Index273
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 273   |  Page
Boundary - delete     133
Boundary Icon     39, 85, 177, 221, 225
Boundary points     Left registration mark     200, 215
Lower Left Corner of E2E     200, 215
Lower Right Corner of E2E     200, 215
Right registration mark     200, 215
Boundary to Pattern - About     124
Boundary to Trim - About     124
Buttons     Channel lock     173
OK     173
Shift     173
Stop     173
- C - Cables     10
CAD screen     60 Preview Area     12
Calibrate All     232
Calibrate automatic     234
Calibrate manual     234
Calibrate Power Assist     234
Calibrate Record     234
Calibrate Stitcher     Z-counts     234
Cardinal Spline     155
Center Anchor     88, 146
Change pattern shape     116
Change Stitch path     Nodes icon     106
Order Join icon     106
Reverse start / end icon     106
Change Stitch Status     Delete     106
Toggle Sewn icon     106
Toggle Unsewn icon     106
Changing Project Properties     Customer     50
Margin     50
Project Name     50
Project Notes     50
Stitch Counter     50
Stitches Per Inch     50
Stitching Speed     50
Tie Stitches     50
Tie Stitches Per Inch     50
Channel Lock     170, 242
Check Belts     164 Chunking     195
Circular Array     46, 258
Circular Array - About     111
Circular array icon     46, 111
Click sound     173
Combine     258
Combine Icon     47
Combine Patterns     47, 258
Combine Patterns icon     46, 138
Combines the patterns     110
Command Bar     27, 232, 233 Commands     29
Competitive Ties     164
Composite block     244
Composite pattern     111
Composite patterns     74, 157, 187
Computer CPU     10
Computer Equipment     10
Computer files     Disk Drive     18
File Folder     18
Path     18
Computer Skills     18
Concatonating P2P patterns     77
Connect     96
Connect Start and End     200, 215
Connect Start End     96
Constant Speed Icon     42
Continue Icon     40
Continue Method     End of Set     200
Place 2 Pins     200
Use Start End     200
Continuous Curves     74
Continuous line designs     74, 190
Continuous Line Patterns     74
Continuous Patterns     Border     76
Border to Border     76
Corners     76
Edge to Edge     76
Pantograph     76
Sashing     76
Specialty     76
Control Points     212, 214
Controller     Mod     10
Power Switches - red and green     10
Controller Definition     232
Controller Mod     34 
						

							274
Getting Started with CreativeStudio®
Controller serial number     74
Controller Serial numbers     34
Convert     143
Convert  Pattern to Boundary - How To     122
Convert  Pattern to Curve - How To     124
Convert  Pattern to Outline - How To     123
Convert  Pattern to Trim - How To     121
Convert Boundary to Pattern     225
Convert Boundary to Pattern - How To     124
Convert Boundary to Trim - How To     125
Convert Curve     124
Convert outline     123
Convert Pattern     47, 122, 124, 258
Convert Pattern Icon     46
Convert Pattern to Boundary     225
Convert Trim     126
Convert Trim to Boundary - How To     126
Convert Trim to Pattern - How To     126
Copy files     20
Copy measurements     93
Copy pattern     46
Corner     246
Corner orientation     54, 190
Corner type     Angled corner     190
Corner Orientation     54
Corner Type     54
L shaped     190
Square corner     190
Square oriented corner     190
Corners     190
Create New Patterns     Apply Pattern icon     106
Circular Array Icon     106
Combine Patterns icon     106
Echo Pattern icon     106
icon     106
Rubber Stamp Pattern icon     106
Creating custom patterns     187
Crosshair     30, 71, 230
Crosshair check     214
Crosshatch     156
Current  Session Setting Shortcuts     Laser     32
Needle Off     32
Needle On     32
Power Assist     32
Stitch in Points     32
Thread Break Detect     32
Tie offs - Competitive     32 Tie Offs - regular     32
Current operation     63
Current Session settings     58
Current settings     33
Cycle Anchor     43
Cycle Pattern Anchor Type     43, 88, 146
Cycle through the stack     110
- D - Dec Speed button     61
Decrease SPI     168
Default settings     58
Define boundary     85
Defining the boundary points     177
Delete - About     133
Delete boundary     85
Delete hierarchy     133
Delete icon     46, 47
Delete pattern icon     47
Deleting a boundary     85
Dense quilting     200, 215, 221
derivative pattern     123
Derivative patterns     20, 74, 139
Deselect patterns     88
Design boundary     225
Design density     75
Design group     101
Design Group created by Image Import     69
Design Icons     38
Designed Pattern Details     79
Designed Pattern Properties     Pattern Name     51
Pattern Speed     51
Stitches Per Inch     51
Tie Stitches     51
Tie Stitches Per Inch     51
Designer node keywords     116
Designer Node Marks     140
Designer node Pause     75
Designer node Speed     75
Designer node SPI     75
Designer nodes     75, 116
Designer Notes     95
destination field     159
Diagnostic test     233
Diagonal     93
Diagram the borders     190
Dialog Box     Dropdown box     12 
						

							Index275
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 275   |  Page
Dialog Box    
Popup box     12
Display Grid     145, 264
Divide - About     118
Divide at nodes     116
Divide Pattern     258
Divide Shortcut Keyboard D     118
Dongle     10
dongle serial number     34
Download files     20
Draw Arc     264
Draw Arc on CAD     43, 44
Draw Boundary     30, 101, 264 Alt B     145
Draw Boundary Alt+B     149
Draw Boundary on CAD     43, 44
Draw cursor     153
Draw Curve     264
Draw Curve on CAD     43, 45
Draw Freehand on CAD     43, 45
Draw Line on CAD     43, 45
Draw Measure     30 Alt M     145
Draw Measure icon     93, 159
Draw Mode     43
Draw on touchscreen     157
Draw Options     30, 105, 145, 264
Draw P2P Line     264
Draw P2P Pattern     264
Draw P2P Pattern on CAD     43, 45
Draw Pattern on CAD     45
Draw Sewable     264 Alt A - Draw Arc     145
Alt C - Draw Curve     145
Alt L - Draw P2P Line     145
Alt P - Draw P2P Pattern     145
Draw Sewable Arc     30
Draw Sewable Curve     30
Draw Sewable P2P Line     30
Draw Sewable P2P Pattern     30
Draw Sewable Arc     153
Draw Sewable Curve     155
Draw Sewable P2P Line     156
Draw Sewable P2P Pattern     157
Draw Shortcuts     153
Draw Trim     30, 127, 264 Alt T     145
Draw Trim Icon     151, 221
Draw Trim Inside     151
Draw Trim on CAD     43, 44 Drill Down     18
duplicate pattern     109, 110
- E - E button     63
E2E     200, 215, 250
E2E alternating     250
E2E Alternating Minus     200, 215
E2E Alternating Plus     200, 215
E2E Automatic     142, 200
E2E ConcatenateConstraints     218
E2E concatonating     250
E2E Continue Icon     40, 200, 215
E2E Icon     200
E2E patterns     74
E2E Primary settings     57
E2E Relocate     214
E2E settings     209
E2E Setup     54
E2E size     58
E2E Variable Settings     58
Echo - inside     112
Echo - outside     112
Echo copies     112
Echo icon     112
Echo Pattern     46
Echo Pattern Icon     46
Echo spacing     112
Echo Stitch - About     112
Edge anchor     88, 146
Edge to Edge     200, 250
Edge To Edge Icon     41, 215
Edit Command     Redo     29
Undo     29
Edit framed in magenta     79
Encrypted patterns     20, 67
Encrypted projects     67
encrypting patterns     34
Encryption     139
End of Set     214
Endpoint     200, 212, 215
Endpoint Anchor     88, 146
Endpoint node     118
Endpoint nodes     75, 88, 116
Endpoint Snap     63
endpoint snaps     120
Equipment     10
Error messages     63 
						

							276
Getting Started with CreativeStudio®
Exit Regulated Sewing     170
Exit Setup Mode     180
Explore     18
Explore function     18
Export CAD screen     103
Export icon     49, 139
Export Image     29
Export images - About     103
Export multiple examples     103
Export Pattern     49, 187, 258
Export Picture     29
Export recorded pattern     160
- F - F1     27
F1 - Help     27
F1 Help     37
F10     88
F10 Center Pattern Anchor     37
F11     88
F11 Endpoint Pattern Anchor     37
F12     88
F12 Stretch Pattern Anchor     37
F2     27
F2 Virtual Stitchout     37
F3     27
F5     27
F5 Keypad Reset     37
F7 Node Mode     37
F8 Set Sewing Order     37
F9     88
F9 Edge Pattern Anchor     37
File     18
File Command     Exit CreativeStudio     29
Export Image     29
Import Image     29
New Project     29
Open Project     29
Save Project     29
Save Project As     29
File Explorer     20
File Extension     20 .doc     18
.dxf     18
.pat     18
.proj     67
.projx     67
.qli     18 .rtf     18
.skf     18
.txt     18
File Cabinet     18
File Drawer     18
File Extension     18
File name     18
File path     67
File Structure     18
File type .csq     139
File type .csqx     139
File type .dxf     139
Fill in corners     187
Fill Inside     47, 225, 258
Fill Inside - About     128
Fill Inside - How To     128
Fill Inside Icon     46
Fill Outside     47, 258
Fill Outside - About     128
Fill Outside - How To     130
Fill Outside Icon     46
Flip Angle     242
Flip H     46
Flip Horizontal     258
Flip pattern - About     108
Flip Pattern Horizontal     46
Flip Pattern Horizontal Icon     46
Flip pattern Horizontally     108
Flip Pattern Icon     46
Flip Pattern Vertical Icon     46
Flip pattern Vertically     108
Flip V     46
Flip Vertical     258
Flip Vertical Pattern     46
Folder     18
Forward     228
Forward 7 stitches     228, 230
Freeze Aspect     75, 77, 88, 95, 178, 180, 196
- G - G button     63
Galil Settings     232
General Pattern Settings     Designer Notes     52, 53
Freeze Aspect     51, 52, 53
Margin     51, 52
Pattern height     51, 52
Pattern Width     51, 52
Selected Pattern Height     53 
						

							Index277
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 277   |  Page
General Pattern Settings    
Selected Pattern Rotation     53
Selected Pattern Width     53
General Stitcher Settings     Pattern Speed     52, 53
Stitches Per Inch     52, 53
Tie Stitches     52, 53
Tie Stitches Per Inch     52, 53
Gray Handles     88, 146
Green Filter     101
Grid Size     30, 71, 145, 264
Gridpoint snap     63, 71, 153, 156
Group Pattern Icon     221
- H - Hand-guided     170
Handle buttons     61
Help     43
Help command     About Help     34
Contents Help     34
Index Help     34
Search help     34
Help Icon     45
Hit the Pickup roller     209
Hopping foot     170
Horizontal spacing     96
Hover over pink     118
Hovering     38
- I - Icons     18, 38
Icons with choices     39
Image Attributes     101
Image Opacity     101
Import Images     29
Import images - About     101
Import pictures     29
Inc Speed button     61
Increase SPI     168
Individual Pattern Details     Freeze Aspect     54, 180
Individual Pattern Rotation     54
Pattern Height     54, 180
Pattern Width     54, 180
Reset to Designed     54, 180
Rotation     180 Individual Pattern Rotation     180
Individual patterns     196
Inherited Settings     Level 0 control     58
Level 1 Defaults     58
Level 2 Current Session     58
Level 3 Current Project     58
Level 4 Current Pattern     58
Level 5 Selected Pattern     58
Inner Border boundary     190
Irregular boundaries     184
- J - Jump Stitch     74, 75, 138
Jump Stitches     120, 126, 128
- K - Key Combinations     16
Keyboard     10, 14 Control Key     16
Ctl     16
Ctrl     16
Del     16
Delete key     16
Ent     16
Enter key     16
Esc     16
Escape Key     16
Keyboard Shortcuts     16
Keypad     10, 14, 30, 38
Keypad Backup     61
Keypad Controls - Idle     Bobbin     61
Mode     61
Select     61
Select Pattern     61
Single Stitch     61
Stop     61
Keypad Controls - Running     Dec Speed     61
Inc Speed     61
Quick Pause     61
Quick Start     61
Stop     61
Keypad Window     61 
						

							278
Getting Started with CreativeStudio®
- L - Laser Control     164
Laser light     196
Left Handle Button     170
Line Thickness     101
- M - Main Screen     Details     27
Preview Area     27
Project Information     27
Properties Window     27
Working Area     27
Maintain Aspect     54
Make next Left Click a Right Click     43
Manual Stop     230
Manual stops     228
Margin     95
Margins     164
Marqee     88
Measure function     196
Measure Icon     41, 93
Measure on CAD     159
Measure with mouse on CAD     43
Measurement transfer     93
Measuring     Binding space     190
Margins     190
Min SPI     164
Minimize to a button     64
Minus Row on top     96
Mirror - About     109
Mirror combines the copies     109
Mirror Icon     46
Mirror Pattern     258
Mirror Pattern Icon     46
Mode button     38, 61
Modify Pattern     Convert incon     106
Fill Inside icon     106
Fill Outside icon     106
Monitor     Computer monitor     10
Display screen     10
Motor speed     63
Mouse     10 Mouse Buttons     14
Mouse Roller     14
Move files     20
Multiple Trim Inside boundaries     221
My Quilt Project     29
My Quilt Project default name     67
- N - Navigate     18
Navigate Pattern files     82, 93
Navigating     Click     14
Cursor     14
Double Click     14
Drag     14
Hovering     14
Panning     14
Right Click     14
Scroll     14
Scroll bars     14
Scrolling     14
Zoom     14
Zooming     14
Needle     164
Needle Off     160
Needle position     242
Needle positioner     170
Needle status     63
Nesting patterns     200, 212, 221
Next Click Right Click Icon     44
No Sew lines     140
Node Mode     75, 88, 140
Node Mode - About     116
Node Mode Icon     47
Node Mode pink     118
Nodes     75
Nodes Icon     46, 47
- O - Object     12
Offset     96
Offset from Point     180
Oil Stitcher     232
Oil Stitcher Routine     233
Open Pattern     82, 93
Operating system     10
Orange handles     88, 146 
						

							Index279
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 279   |  Page
Order Join     47, 258
Order Join - About     120
Order Join Icon     46
Origin Point     67, 233
Outer Border boundary     190
Outline pattern     123
Overlapping patterns     187
- P - P2P buttons     Channel lock     196
P2P Concatonate     77
P2P concatonation     114
P2P Freeze Aspect impact     77
P2P Icon     196
P2P Line     253
P2P Line on CAD     45
P2P Line Speed     164
P2P Pattern     114, 254
P2P pattern restrictions     77
P2P patterns     196
P2P Settings     Angle     196
Array Mode     196
Flip Angle     196
P2P Type     164
Pan Patterns     43
Pantographs     200, 215
Path     18
Pattern - delete     133
Pattern Anchor     88, 145, 264 Center Anchor     30
Center anchor F10     146
Edge Anchor     30
Edge anchor F9     146
Endpoint Anchor     30
Endpoint anchor  F11     146
Node Mode F7     146
Resizing handles     30
Stretch Anchor     30
Stretch Anchor F12     146
Pattern Color     Black - Unsewn     200
Red - Sewn     200
Teal - Wont fit     200
Pattern Deselecting     80
Pattern Design Options     Export Pattern icon     106
Pattern Options     106 Relocate icon     106
Pattern details     88, 95 Framed in Blue     51
Pattern Encryption     74
Pattern files     20
Pattern height     95
Pattern image color     228, 230
Pattern Location Point     96, 180 Offset     54
Pattern Location     54
Pattern path     114
Pattern Placement     190
Pattern Repeats     190
Pattern rotation     85
Pattern Rows     190
Pattern scale     200, 212, 215
Pattern Segment grouping     120
Pattern segments     75, 116
Pattern Select all icon     80
Pattern Selection     80
Pattern Selection - Ctrl+click     80
Pattern Selection - Marque (click and drag)     80
Pattern Selection - specific     80
Pattern Selection - stacked     80
Pattern Settings     58
Pattern speed     95
Pattern to Boundary - About     121
Pattern to Boundary choices     Squeeze fit     86
Standard fit     86
Stretch fit     86
Pattern To Boundary Icon     86, 190, 221 Squeeze Fit     40, 178
Standard Fit     40, 178
Stretch Fit     40, 178
Pattern to Curve - About     121
Pattern to Outline - About     121
Pattern to Trim     121
Pattern width     95
PAUSE messages     116
Perimeter boundary     121, 122, 128, 130
Phase 1     168
Phase 2 - Blocks     177
photo .jpg image     101
Pick New Point     228, 230
Place Array Center Point     111
Plan the Point layout     196
Planning the Quilt     Preview Patterns     66
WYSIWYQ     66 
						

							280
Getting Started with CreativeStudio®
Plus Row on Top     96
Point of origin     67
Point to Point     196, 253, 254
Point To Point - Line     173
Point to Point Icon     40
Point to Point Pattern     187
Point To Point Pattern Icon     196
Point to Point Patterns     74, 77
Power Assist     234
Power Down     12
Power Up     12
Preview area     60, 93 CAD screen     48
Preview P2P line     173
Preview Patterns     66
Preview patterns together     60
Primary Settings     Quilt length     54, 200, 212, 215
Process Details     Framed in Gray     54
Project     12
Project Encryption     74
Project File Names     67
Project files     20
Project Information     48, 70, 73 Pattern file name     48
Pattern thumbnail image     48
Selected Patterns     48
Project Information Icons     Add Pattern Icon     48
Add Quilt Group Icon     48
Export Icon     48
Project Properties Icon     48
Remove Pattern Icon     48
Remove Quilt Group Icon     48
Save Project Icon     48
Undo Icon     48
Virtual Stitchout Icon     48
Project Names     67
Project Properties     67 Framed in Yellow     50
Project Properties Icon     49
Project Settings     58
Properties Box     Details     12
Properties     12
Properties Settings     Pattern Details framed in Cyan     49
Process Detailsframed in Gray     49
Project Details framed in Yellow     49 Selected Pattern Details framed in Magenta    
49
Properties Window     48
Property Window     49
Purple Handles     88, 146
- Q - Quick Pause button     61
Quick Start button     61
Quilt Angle     96, 180
Quilt Group     12, 60 Preview Area     69
Tab name     69
Quilt Group created by Border Corner     69
Quilt Group created by E2E     69
Quilt Group tabs     69
Quilt Group unique name     70
Quilt Icon     40
Quilt Length     Adjusted quilt length     200, 215
Oversized     200, 215
Quilt Pattern Edit Mode     79
Quilt Pattern Setup Mode     79
Quilt Patterns     74
Quilt Project     12
Quilt Projects     Files     66
Project information     66
Projects     66
Save projects     66
Quilting sequence     Background     164
Baste to stabilize     164
Blocks     164
Borders     164
- R - Radiating Lines     242
Recall E2E settings     142
Reconnect pattern segments     120
Record Mode - About     160
Record Options     105
Record Patterns     269
Record stitching path     42
Recorded Patterns folder     160
Recording OFF     160
Recording ON     160