Creative Studio 6 Manual

Work Area51
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 51   |  Page Main Screen Layout
Property Window
Stitches per Inch  (SPI) setting will apply to all the patterns selected for the project. 
Stitching Speed
 is measured as a percentage of maximum motor speed. 
50 means 50% of the maximum speed.  
Tie Stitches Per Inch
  is the size of the stitches taken when doing tieoffs.
Tie Stitches 
is the number of stitches taken when doing tieoffs....

Getting Started with CreativeStudio®
52
Changing the Designed Pattern Properties:
General (Stitcher) Settings  for this pattern have values that are inherited from the
project settings
 (which were inherited from the  current defaults
).  If any
setting is changed here, it will apply to the patterns that are moved into the
preview area  after the change
, not those that have already been moved into
the preview area. 
General (Pattern) Settings  have values that are inherited from the pattern (as...

Work Area53
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 53   |  Page Main Screen Layout
Property Windowsize changes. So, if one of the dimensions is changed, CS will change the other
automatically to keep the ratio the same. OFF means CS will allow the ratio to
be distorted.
Designer Notes
 - may have notes from the designer but can be modified to include
your notes about this pattern. 
Margin
 is the closest distance between the stitch lines and...

Getting Started with CreativeStudio®
54
Stitches per Inch  applies to this pattern. 
Pattern Speed
 
is a percentage of maximum motor speed. 50 means 50% of the
maximum speed.
Tie Stitches Per Inch
  is the size of the stitches taken when doing tieoffs.
Tie Stitches
 is the number of stitches taken when doing tieoffs. 
Selected Pattern Width
 is the width of one pattern.
Selected Pattern Height
 is the height of one pattern. 
Freeze Aspect
  - OFF means the Height & Width are independent of each other....

Work Area55
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 55   |  Page Main Screen Layout
Property Window
Pattern Location Point  aligns the repeated patterns (on the CAD) to the quilt top. 
Pattern Location
 uses the position of the sewing head to indicate where to place the
repeated patterns.  
Offsets
 are used if the repeated patterns need to be positioned some distance from
the initial location point. As an example, the location point may be the...

Getting Started with CreativeStudio®
56
Spacing  - The pattern placement can be adjusted as desired. The Horizontal
spacing affects the space between the repeats. The Vertical spacing affects the
space between rows. Space can be increased (positive spacing) or decreased
(negative spacing). CS automatically includes the spacing adjustment when it
calculates the Total Width and Total Height of the area to be quilted.
Quilt angle
 - is the number of degrees that the set of repeated patterns is angled....

Work Area57
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 57   |  Page Main Screen Layout
Property Window
Connect  - True means CS will connect the border patterns to the corners. False
leaves them separated. 
Corner Types:
Orientation
 refers to the shape of the original design. Make a choice based on the
original design; does it look like the corner would fit in the Upper Left corner?
UR? LR? LL? 
Type
 refers to the overall shape and how it should...

Getting Started with CreativeStudio®
58
Size Settings  refer to the quilt pattern chosen (highlighted in the Project Information
box).
Pattern Width
 is the width of one pattern.
Pattern Height
 is the height of one pattern. 
Repeats and Rows
 will be calculated by CS based on the pattern size and the quilt
space (Length and width). Changes to the  number of repeats and rows will adjust
the pattern size to fit the quilt space. 
Spacing
 allows the rows and columns to be nested if needed. The spacing...

Work Area59
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 59   |  Page Main Screen Layout
Property Window not affect other projects but they can be saved with the project.
L5 Settings
 can be changed for a pattern that has been selected
and is visible in the preview area of the screen. These changes are
not retroactive and have no effect on any other patterns in the
project. These changes will not affect the same pattern if it is used
again in this...

Getting Started with CreativeStudio®
60
2.5.3 Preview Area (CAD Screen)
The Preview Area  
–  
(also called the CAD window by techies) is the big, white
area where the images of the patterns, boundaries and photos appear. Think of the
project as a binder, with tabbed dividers. Each tab is a quilt group and each can hold
any of these images. By default, the project starts with Quilt Group1. Each quilt
group added can be given a specific name. CS counts the number of groups being
used, and will assign an...