Home > Corbin > Firearms accessories > Corbin FJFB-3-S Instructions Manual

Corbin FJFB-3-S Instructions Manual

Add to Favourites
    Download as PDF

    View the Corbin FJFB-3-S Instructions Manual for free. All the Corbin manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 How to Swage Bullets Using The FJFB-3-S or -M Die Set Type -S dies are 1-inch in diameter, with a 5/8-24 shank, and fit into the ram of the Corbin CSP-1 All-Steel press. The type -M dies are 3/4-inch in diameter, with a 5/8-24 shank, and fit into the ram of the CSP-1 or the CSP-3 Silver Press (horizontal). The 3-die set consists of a CORE SWAGE (CSW-1), a CORE SEAT(CS-1), and a POINT FORM (PF-1) die, each with one internal and one external punch. The external punch is held in the floating punch...
    Page 2 Instructions for the FJFB-3-S or -M die set, Page 2 The core seating die (CS-1-H) is NOT used when making rebated boattail bullets: instead, a pair of RBT dies is used in sequence to seat the core. The external punch can also have a projecting cone on the end to make hollow points. The internal punch can be flat, domed or have a conical projection to form the mirror image of that shape in the bullet base. Place the clean core into the jacket, and put both into the core seating die with the jacket mouth...
    Start reading Corbin FJFB-3-S Instructions Manual

    Related Manuals for Corbin FJFB-3-S Instructions Manual

    All Corbin manuals