Home > Corbin > Firearms accessories > Corbin Finned Shotgun Slug Swage Instructions Manual

Corbin Finned Shotgun Slug Swage Instructions Manual

Add to Favourites
    Download as PDF

    View the Corbin Finned Shotgun Slug Swage Instructions Manual for free. All the Corbin manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 Finned Shotgun Slug Swage KitThe finned hollow cavity shotgun slug is formed in three steps, using a CSW-1-H core swage, CS-1-H core seater, and PF-1-H point form die. An ejector frame is used, with special ejecting external punch and punch holder, to free the finned slug from the final punch. The usual FPH-1-H floating punch holder is NOT used in the final operation of forming the point. It can be used in the first two steps. The 12-gauge set is designed to make slugs from 1.125 to 1.375 ounces. Heavier...
    Page 2 STEP 4. Finish the slug in the point forming die. The exter- nal punch has an ejector and fits into a special punch holder so that the ejector punch projects from the top. An optional ejection frame fits on the press. Do not tighten the screws at first: instead, slide the two 5/ 16-inch threaded rods down through the two bronze bushings in the top of the press, with the longer threaded ends up. Place a 5/16-18 nut on the lower ends of each rod, and screw the rods into the L-brackets. Snug up the nuts...
    Start reading Corbin Finned Shotgun Slug Swage Instructions Manual

    Related Manuals for Corbin Finned Shotgun Slug Swage Instructions Manual

    All Corbin manuals