compaq notebook evo n160 series User Manual

							B–2Maintenance and Service Guide
Power Cord Set Requirements
Country-Specific Requirements
Notes
1. The flexible cord must be  Type HO5VV-F, 
3-conductor, 1.0 mm
2 conductor size. Power cord set fittings 
(appliance coupler and wall plug) must bear the certification 
mark of the agency responsible for evaluation in the country 
where it will be used.
3-Conductor Power Cord Set Requirements
Country Accredited Agency Applicable Note Number
Australia EANSW 1
Austria OVE 1
Belgium CEBC 1
Canada CSA 2
Denmark DEMKO 1
Finland FIMKO 1
France UTE 1
Germany VDE 1
Italy IMQ 1
Japan METI 3
The Netherlands KEMA 1
Norway NEMKO 1
Sweden SEMKO 1
Switzerland SEV 1
United Kingdom BSI 1
United States UL 2 
						

							Power Cord Set Requirements
Maintenance and Service GuideB–3
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 
AWG, 3-conductor. The wall plug must be a two-pole 
grounding type with a NEMA 5-15P (15A, 125V) or NEMA 
6-15P (15A, 250V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear 
a “T” mark and registration number in accordance with the 
Japanese Dentori Law. The flexible cord must be Type VCT 
or VCTF, 3-conductor, 1.00mm
2 conductor size. The wall 
plug must be a two-pole grounding type with a Japanese 
Industrial Standard C8303 (7A, 125V) configuration. 
						

							Maintenance and Service GuideC–1
C
Screw Listing
This appendix provides specification and reference information 
for the screws used in the computer. All screws listed in this 
appendix are available in the Miscellaneous Screw Kit, spare part 
number 251366-001.
Ta b l e  C - 1
Phillips M3 × 8.0 Screw
Color Qty Length ThreadHead 
Width
Silver 1 8.0 mm 3.0 mm 6.0 mm
Where used:
One screw that secures the hard drive to the computer (documented in 
Section 5.3) 
						

							C–2Maintenance and Service Guide
Ta b l e  C - 2
Phillips M3.0 × 4.0 Screw
Color Qty Length ThreadHead 
Width
Black 4 4.0 mm 3.0 mm 6.0 mm
Where used:
Four screws that secure the hard drive to the hard drive sleeve (documented in 
Section 5.3) 
						

							Maintenance and Service GuideC–3
Ta b l e  C - 3
Phillips M2.0 × 5.0 Screw
Color Qty Length ThreadHead 
Width
Silver 4 5.0 mm 2.0 mm 5.0 mm
Where used:
One screw that secures the memory expansion compartment cover to the base 
enclosure (documented in Section 5.4) 
						

							C–4Maintenance and Service Guide
Ta b l e  C - 3
Phillips M2.0 × 5.0 Screw (Continued)
Color Qty Length ThreadHead 
Width
Silver 4 5.0 mm 2.0 mm 5.0 mm
Where used:
Two screws that secure the keyboard shield to the top cover (documented in 
Section 5.7) 
						

							Maintenance and Service GuideC–5
Ta b l e  C - 3
Phillips M2.0 × 5.0 Screw (Continued)
Color Qty Length ThreadHead 
Width
Silver 4 5.0 mm 2.0 mm 5.0 mm
Where used:
One screw that secures the system board to the base enclosure (documented 
in Section 5.16) 
						

							C–6Maintenance and Service Guide
Ta b l e  C - 4
Phillips M2.0 × 9.0 Screw
Color Qty Length ThreadHead 
Width
Black 15 9.0 mm 2.0 mm 5.0 mm
Where used:
Two screws that secure the switch cover to the base enclosure memory 
expansion compartment cover to the base enclosure (documented in 
Section 5.6) 
						

							Maintenance and Service GuideC–7
Ta b l e  C - 4
Phillips M2.0 × 9.0 Screw (Continued)
Color Qty Length ThreadHead 
Width
Black 15 9.0 mm 2.0 mm 5.0 mm
Where used:
Eight screws that secure the top cover to the base enclosure (documented in 
Section 5.11) 
						

							C–8Maintenance and Service Guide
Ta b l e  C - 4
Phillips M2.0 × 9.0 Screw (Continued)
Color Qty Length ThreadHead 
Width
Black 15 9.0 mm 2.0 mm 5.0 mm
Where used:
Two screws that secure the top cover to the base enclosure (documented in 
Section 5.11)