compaq lte elite User Manual
Here you can view all the pages of manual compaq lte elite User Manual. The Compaq manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 301
![Page 301
3. Compress the spring by holding the horizontal guide and rotating the
bent leg of the spring [1] toward the guide (Figure 9-56).](http://img.usermanuals.tech/thumb/1258/38935/w300_compaq-lte-elite-300.png "Page 301
3. Compress the spring by holding the horizontal guide and rotating the
bent leg of the spring [1] toward the guide (Figure 9-56).")
3. Compress the spring by holding the horizontal guide and rotating the bent leg of the spring [1] toward the guide (Figure 9-56).
Page 302
![Page 302
NOTE: The horizontal guide mounts on the horizontal guide pivot post [1] in
the top cover with the curved surface of the horizontal guide in the
horizontal guide slot [2] (Figure 9-57).](http://img.usermanuals.tech/thumb/1258/38935/w300_compaq-lte-elite-301.png "Page 302
NOTE: The horizontal guide mounts on the horizontal guide pivot post [1] in
the top cover with the curved surface of the horizontal guide in the
horizontal guide slot [2] (Figure 9-57).")
NOTE: The horizontal guide mounts on the horizontal guide pivot post [1] in the top cover with the curved surface of the horizontal guide in the horizontal guide slot [2] (Figure 9-57).
Page 303
4. Keeping the spring compressed, place the horizontal guide over the horizontal guide pivot post in the top cover and the curved surface of the horizontal guide into the horizontal guide slot and release the spring (Figure 9-58).
Page 304
5. Replace the eject switch and screw (Figure 9-59).
Page 305
![Page 305
NOTE: The screw that attaches the eject switch to the top cover is also
used to attach the horizontal guide.
Power Switch Side
To replace the horizontal guide and spring for the power switch side,
complete the following steps:
1. Position the spring so that the legs of the spring are on the top [1]
(Figure 9-60).
2. With the curved surface of the horizontal guide [2] facing left, place
the spring post of the horizontal guide [3] in the coil of the spring
[4]. Ensure that both legs of the spring are to...](http://img.usermanuals.tech/thumb/1258/38935/w300_compaq-lte-elite-304.png "Page 305
NOTE: The screw that attaches the eject switch to the top cover is also
used to attach the horizontal guide.
Power Switch Side
To replace the horizontal guide and spring for the power switch side,
complete the following steps:
1. Position the spring so that the legs of the spring are on the top [1]
(Figure 9-60).
2. With the curved surface of the horizontal guide [2] facing left, place
the spring post of the horizontal guide [3] in the coil of the spring
[4]. Ensure that both legs of the spring are to...")
NOTE: The screw that attaches the eject switch to the top cover is also used to attach the horizontal guide. Power Switch Side To replace the horizontal guide and spring for the power switch side, complete the following steps: 1. Position the spring so that the legs of the spring are on the top [1] (Figure 9-60). 2. With the curved surface of the horizontal guide [2] facing left, place the spring post of the horizontal guide [3] in the coil of the spring [4]. Ensure that both legs of the spring are to...
Page 306
![Page 306
3. Compress the spring by holding the horizontal guide and rotating the
straight leg of the spring [1] toward the guide (Figure 9-61).](http://img.usermanuals.tech/thumb/1258/38935/w300_compaq-lte-elite-305.png "Page 306
3. Compress the spring by holding the horizontal guide and rotating the
straight leg of the spring [1] toward the guide (Figure 9-61).")
3. Compress the spring by holding the horizontal guide and rotating the straight leg of the spring [1] toward the guide (Figure 9-61).
Page 307
![Page 307
NOTE: The horizontal guide mounts on the horizontal guide pivot post [1] in
the top cover with the curved surface of the horizontal guide in the
horizontal guide slot [2] (Figure 9-62).](http://img.usermanuals.tech/thumb/1258/38935/w300_compaq-lte-elite-306.png "Page 307
NOTE: The horizontal guide mounts on the horizontal guide pivot post [1] in
the top cover with the curved surface of the horizontal guide in the
horizontal guide slot [2] (Figure 9-62).")
NOTE: The horizontal guide mounts on the horizontal guide pivot post [1] in the top cover with the curved surface of the horizontal guide in the horizontal guide slot [2] (Figure 9-62).
Page 308
4. Keeping the spring compressed, place the horizontal guide over the horizontal guide pivot post in the top cover and the curved surface of the horizontal guide into the horizontal guide slot and release the spring (Figure 9-63).
Page 309
5. Replace the power switch and screw (Figure 9-64).
Page 310
NOTE: The screw that attaches the power switch to the top cover is also used to attach the horizontal guide. 9.20 Top Cover To remove the top cover, complete the following steps: 1. Remove the bottom cover (Section 9.6). 2. Remove any installed drives and drive bezels (Section 9.15). 3. Remove the drive cages (Section 9.16). 4. Remove the power switch and eject switch cable harnesses (Section 9.17) 5. Remove the PCMCIA card sensor (Section 9.17). 6. Remove the horizontal guides and springs (Section...