Compaq IPAQ H3000 Reference Guide

Basic Skills2-1
chapter 2
B
ASIC SKILLS
Learning to use your iPAQ H3000 Pocket PC is easy. This chapter describes the basic con-
cepts of using and customizing your iPAQ H3000 Pocket PC.
Front Panel Components
ItemComponentFunction
1Stylus  Allows you to tap or write on the screen. Push the 
stylus release button (w) to release it from the 
compartment.
2Power Button  Powers the iPAQ H3000. Press and release the 
button to turn on or off your iPAQ H3000. Press 
and hold the button for one second to...

2-2Basic Skills
3Alarm/Charge 
LightServes as both a battery charge indicator and a 
visual alarm indicator. 
• Flashing green: Notification alarm signal.
• Flashing amber: Battery is charging.
• Solid amber: Battery is fully charged
4Light Sensor  Detects the ambient light level so that the back-
light level adjusts to suit the environment (only 
available on iPAQ H3600 Series Pocket PCs).
5Speaker  Sounds alarms and plays back sound recordings.
6iPAQ Navigator/
Action ButtonAllows you to scroll through...

Basic Skills2-3
Bottom Edge Components
ItemComponentFunction
1Communications 
Port Connects your iPAQ H3000 to the cradle or auto-
sync cable.
2Reset Button Lets you reset your iPAQ H3000. For more infor-
mation, see “Reset the iPAQ H3000 and Clear 
Memory” in Appendix A.
3On/Off  Switch Allows you to clear all data, and reset your system 
if you have forgotten your password. Clearing 
memory deletes all data and restores your iPAQ 
H3000 to its default settings. For more informa-
tion, see “Reset the...

2-4Basic Skills
Cradle and AC Adapter
Your iPAQ H3000 comes with either a cradle or auto-sync cable, and an AC adapter. This 
allows you to recharge your iPAQ H3000, as well as synchronize the information between 
your iPAQ H3000 and a computer using ActiveSync. For more information on synchroni-
zation, see ActiveSync Help on your computer.
NOTE:The cradle or auto-sync cable must be plugged into an appropriate port on the back of
your computer. Example, you must plug the serial cradle into a serial port...

Basic Skills2-5
Recharging the Battery
Your iPAQ H3000 contains a rechargeable Lithium Polymer battery that is recharged each 
time you place your iPAQ H3000 in the cradle and connect the cradle to an external power 
source with the AC adapter. You never need to replace the battery. Just place your iPAQ 
H3000 in the cradle for three to four hours for an initial charge before you use it the first 
time. Next, place it in the cradle for a short time each day to recharge the battery to its full 
capacity....

2-6Basic Skills
Compaq iPAQ Expansion Pack System
Your iPAQ features the iPAQ Expansion Pack System, which allows you to personalize 
the appearance of your iPAQ H3000 or add extra functionality. iPAQ Style Packs offer a 
range of styles to customize your iPAQ, while Expansion Packs, such as the Compact-
Flash Card, or PC Card Expansion Pack, let you add extra features. 
Compaq iPAQ Expansion and Style Packs are designed to easily slide on and off your 
Pocket PC without having to power off your Pocket...

Basic Skills2-7
To remove a Compaq iPAQ Expansion Pack:
Slide the Expansion Pack down and off your iPAQ H3000. 
 
Compaq iPAQ CF Card Expansion Pack
The optional Compaq iPAQ CF Card Expansion Pack supports Type I and Type II Com-
pactFlash cards. The CompactFlash slot allows you to install storage cards for backup and 
storage of data and applications. It also allows you to install communication devices such 
as a LAN adapter or a fax/modem. 
To insert a CompactFlash card:
1. Remove the CompactFlash slot...

2-8Basic Skills
2. Push the card, connector-side first into the slot until it stops. 
NOTE:Do not force the card into the slot. If the card does not seem to fit, verify that it is
facing the correct direction and that you are not inserting the card at an angle.
To remove a CompactFlash card:
1. Close all applications on your iPAQ H3000 that have open files on the CompactFlash 
card.
2. Lever the CompactFlash card out of the slot using a fingernail. 
Guidelines for Using CompactFlash Cards
• Your iPAQ...

Basic Skills2-9
The Stylus
Your iPAQ H3000 has a stylus for selecting items and entering information. To use the 
stylus, press and hold the stylus release button while pulling the stylus upward out of its 
compartment. To replace the stylus, just insert it back into the compartment, then push it 
until it clicks into place.
The following actions are available with the stylus: 
•Ta p. Touch the screen once with the stylus to open items and select options.
•Drag. Hold the stylus on the screen and drag it...

2-10Basic Skills
Today Screen
When you turn on your iPAQ H3000 for the first time each day (or after 4 hours of inactiv-
ity), you’ll see the Today screen. You can also display it by tapping   then To d a y. On the 
Today screen, you can see at a glance important information for the day.
You may see the following status icons on the command bar in the Today screen. 
Status Icon
Description
Turns all sounds on and off 
Main battery is charging 
Main battery is low
Main battery is very low 
External (AC)...