compaq evo notebook n1000 series User Manual

Power Cord Set Requirements
Maintenance and Service GuideB–3
United Kingdom BSI 1
United States UL 2
Notes
1. The flexible cord must be  Type HO5VV-F, 3-conductor, 1.0 mm
2 
conductor size. The power cord set fittings (appliance coupler and wall plug) 
must bear the certification mark of the agency responsible for evaluation in 
the country where they will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG, 
3-conductor. The wall plug must be a two-pole grounding type with a NEMA...

Maintenance and Service GuideC–1
C
Screw Listing
This appendix provides specification and reference information 
for the screws used in the computer. All screws listed in this 
appendix are available in the Miscellaneous Screw Kit, spare part 
number 285542-001.
279372-001.book  Page 1  Friday, July 19, 2002  11:50 AM 

C–2Maintenance and Service Guide
Figure C-1. TM2.5 × 5.0 Screw Locations
Ta b l e  C - 1
Torx T8 Metric 2.5 × 5.0 Screw
Color Qty Length ThreadHead 
Width
Silver 30 5.0 mm 2.5 mm 5.0 mm
Where used:
Two screws that secure the optical drive to the computer
(documented in Section 5.3)
279372-001.book  Page 2  Friday, July 19, 2002  11:50 AM 

Maintenance and Service GuideC–3
Figure C-2. TM2.5 × 5.0 Screw Locations
Ta b l e  C - 1
Torx T8 Metric 2.5 × 5.0 Screw (Continued)
Color Qty Length ThreadHead 
Width
Silver 30 5.0 mm 2.5 mm 5.0 mm
Where used:
Two screws that secure the connector cover to the base enclosure
(documented in Section 5.8)
279372-001.book  Page 3  Friday, July 19, 2002  11:50 AM 

C–4Maintenance and Service Guide
Figure C-3. TM2.5 × 5.0 Screw Locations
Ta b l e  C - 1
Torx T8 Metric 2.5 × 5.0 Screw (Continued)
Color Qty Length ThreadHead 
Width
Silver 30 5.0 mm 2.5 mm 5.0 mm
Where used:
1 One screw that secures the heat spreader to the base enclosure
(documented in Section 5.11)
2 One screw that secures the display video cable ground loop to the heat 
spreader (documented in Sections 5.11 and 5.13)
279372-001.book  Page 4  Friday, July 19, 2002  11:50 AM 

Maintenance and Service GuideC–5
Figure C-4. TM2.5 × 5.0 Screw Locations
Ta b l e  C - 1
Torx T8 Metric 2.5 × 5.0 Screw (Continued)
Color Qty Length ThreadHead 
Width
Silver 30 5.0 mm 2.5 mm 5.0 mm
Where used:
One screw that secures the display inverter cable ground loop to the heat 
spreader (documented in Section 5.13)
279372-001.book  Page 5  Friday, July 19, 2002  11:50 AM 

C–6Maintenance and Service Guide
Figure C-5. TM2.5 × 5.0 Screw Locations
Ta b l e  C - 1
Torx T8 Metric 2.5 × 5.0 Screw (Continued)
Color Qty Length ThreadHead 
Width
Silver 30 5.0 mm 2.5 mm 5.0 mm
Where used:
1 Three screws that secure the diskette drive to the palm rest
(documented in Section 5.15)
2 TouchPad only models—Four screws that secure the TouchPad 
components to the palm rest (documented in Section 5.16)
2 Dual Stick models—Five screws that secure the TouchPad components to 
the palm rest...

Maintenance and Service GuideC–7
Figure C-6. TM2.5 × 5.0 Screw Locations
Ta b l e  C - 1
Torx T8 Metric 2.5 × 5.0 Screw (Continued)
Color Qty Length ThreadHead 
Width
Silver 30 5.0 mm 2.5 mm 5.0 mm
Where used:
Three screws that secure the charger board and shield to the base enclosure
(documented in Section 5.18)
279372-001.book  Page 7  Friday, July 19, 2002  11:50 AM 

C–8Maintenance and Service Guide
Figure C-7. TM2.5 × 5.0 Screw Locations
Ta b l e  C - 1
Torx T8 Metric 2.5 × 5.0 Screw (Continued)
Color Qty Length ThreadHead 
Width
Silver 30 5.0 mm 2.5 mm 5.0 mm
Where used:
Three screws that secure the top cover to the base enclosure
(documented in Section 5.20)
279372-001.book  Page 8  Friday, July 19, 2002  11:50 AM 

Maintenance and Service GuideC–9
Figure C-8. TM2.5 × 5.0 Screw Locations
Ta b l e  C - 1
Torx T8 Metric 2.5 × 5.0 Screw (Continued)
Color Qty Length ThreadHead 
Width
Silver 30 5.0 mm 2.5 mm 5.0 mm
Where used:
1 Two screws that secure the optical drive front alignment rail to the base 
enclosure (documented in Section 5.22)
2 Two screws that secure the optical drive rear alignment rail to the base 
enclosure (documented in Section 5.22)
3 Three screws that secure the system board to the base enclosure...