compaq armada m700 User Manual

Illustrated Parts Catalog    3-7
Table 3-1  continued
Item Description Spare Part Number
13 CPU base enclosure (includes modem cover ); used with the
following SKUs:215374-001
215191-XXX
215199-XXX215197-XXX 215198-XXX
does not include modem cover; used with all other SKUs. 135225-001
14 Hard drive
20.0 GB
12.0 GB
10.0 GB
  6.4 GB
  6.0 GB; used only with SKUs 205857-XXX and 205858-XXX216541-001
159759-001
143471-001 and
216396-001
135217-001
190763-001
15 Battery pack
8-cell Li ion
6-cell Li...

3-8    Illustrated Parts Catalog
3.3  Plastics Kit Components
Figure 3-3.  Plastics Kit Components 

Illustrated Parts Catalog    3-9
Table 3-2
Plastics Kit Components
Spare Part Number 135230-001
Item Description
  1a Switch cover without Easy Access buttons; used with the following SKUs:124898-XXX
124899-XXX
124938-XXX
124939-XXX
124940-XXX
124941-XXX
139114-XXX
139116-XXX
139117-XXX
139120-XXX
140141-XXX
140142-XXX
149207-XXX149208-XXX
152550-XXX
159695-XXX
159696-XXX
159697-XXX
164462-XXX
205860-XXX
205861-XXX
205862-XXX
205857-XXX
205858-XXX
205859-XXX400322-XXX
400323-XXX
400324-XXX
400325-XXX...

3-10    Illustrated Parts Catalog
3.4  Cable Kit Components
Figure 3-4.  Cable Kit Components
Table 3-3
Cable Kit Components
Spare Part Number 152605-001
Item Description
  1 RAM board
  2 Real time clock (RTC) battery
not illustrated:
microphone assembly
microphone cable
speaker cable 

Illustrated Parts Catalog    3-11
3.5  Mass Storage Devices
Figure 3-5.  Mass Storage Devices
Table 3-4
Spare Parts:  Mass Storage Devices
Item Description Spare Part Number
  1 Hard drive
20.0 GB
12.0 GB
10.0 GB
  6.4 GB
  6.0 GB; used only with SKUs 205857-XXX and 205858-XXX216541-001
159759-001
143471-001 and
216396-001
135217-001
190763-001
  2 24-speed Max CD-ROM drive
20-speed Max CD-RW drive (not illustrated)315082-002
153992-001
  3 8-speed Max DVD-ROM drive
4-speed Max DVD-ROM drive173949-001...

3-12    Illustrated Parts Catalog
3.6  Miscellaneous
Table 3-5
Spare Parts:  Miscellaneous (not illustrated)
Description Spare Part Number
Armada M700 Maintenance & Service Guide158339-001
Battery Charger 153991-001
Cables
Automobile Power Adapter/Charger cable
Aircraft Power Adapter cable
Composite TV cable
RJ11 modem cable
RJ45 modem cable102257-001
102259-001
102260-001
165224-001
191230-001
Hard Drive Adapter 153100-001
Logo Kit213741-001
Memory expansion board
256 MB
128 MB
  64 MB
  32...

Removal and Replacement Preliminaries    4-1
chapter
 
4
REMOVAL AND REPLACEMENT
PRELIMINARIES
This chapter provides essential information for proper and safe removal and
replacement service.
4.1  Tools Required
You will need the following tools to complete the removal and replacement
procedures:

 Magnetic Torx T-8 screwdriver (for all screws unless otherwise specified)

 9/32-inch socket for bushing guides
4.2  Service Considerations
Listed below are some of the considerations that you should keep in...

4-2    Removal and Replacement Preliminaries
Cables and Connectors
Cables must be handled with extreme care to avoid damage. Apply only the tension
required to unseat or seat the cables during removal and insertion. Handle cables by the
connector whenever possible. In all cases, avoid bending, twisting, or tearing cables.
Ensure that cables are routed in such a way that they cannot be caught or snagged by
parts being removed or replaced. Handle flex cables with extreme care; they tear easily.
CAUTION:...

Removal and Replacement Preliminaries    4-3
4.4  Preventing Electrostatic Damage
Many electronic components are sensitive to electrostatic discharge (ESD). Circuitry
design and structure determine the degree of sensitivity. Networks built into many
integrated circuits provide some protection, but in many cases the discharge contains
enough power to alter device parameters or melt silicon junctions.
A sudden discharge of static electricity from a finger or other conductor can destroy
static-sensitive...

4-4    Removal and Replacement Preliminaries
Workstation Precautions
Use the following grounding precautions at workstations:

 Cover the workstation with approved static-dissipative material (refer to Table 4-2
later in this chapter).

 Use a wrist strap connected to a properly grounded work surface and use properly
grounded tools and equipment.

 Use field service tools, such as cutters, screwdrivers, and vacuums that are
conductive.

 When using fixtures that must directly contact dissipative...