compaq armada 110 User Manual

Power Cord Set Requirements
Maintenance and Service GuideB–3
Notes
1. The flexible cord must be  Type HO5VV-F, 
3-conductor, 1.0 mm
2 conductor size. Power cord set fittings 
(appliance coupler and wall plug) must bear the certification 
mark of the agency responsible for evaluation in the country 
where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 
AWG, 3-conductor. The wall plug must be a two-pole 
grounding type with a NEMA 5-15P (15A, 125V) or NEMA 
6-15P (15A, 250V)...

Maintenance and Service GuideC–1
C
Screw Listing
This appendix provides specification and reference information 
for the screws used in the Compaq Armada 110 Series. All screws 
listed in this appendix are available in the Miscellaneous Screw 
Kit, spare part number 233656-001.
Ta b l e  C - 1
M2.5 × 5 Screw
Color Qty Length ThreadHead 
Width
Black 2 5 mm M2.5 5.5 mm
Where used: 2 screws securing the keyboard to the base enclosure 
(documented in Section 5.7) 

C–2Maintenance and Service Guide
Ta b l e  C - 2
M2.5 × 4.5 Screw
Color Qty Length ThreadHead 
Width
Black 15 4.5 mm M2.5 4 mm
Where used: 2 screws securing the hinge covers to the display hinges 
(documented in Section 5.6). 

Maintenance and Service GuideC–3
Ta b l e  C - 2
M2.5 × 4.5 Screw (Continued)
Color Qty Length ThreadHead 
Width
Black 15 4.5 mm M2.5 4 mm
Where used:
1 1 screw securing the optical drive to the heat sink (documented in 
Section 5.8)
2 1 screw securing the display ground cable to the base enclosure 
(documented in Section 5.9)
3 1 screw securing the heat sink to the base enclosure (documented in 
Section 5.10) 

C–4Maintenance and Service Guide
Ta b l e  C - 2
M2.5 × 4.5 Screw (Continued)
Color Qty Length ThreadHead 
Width
Black 15 4.5 mm M2.5 4 mm
Where used:
1 3 screws securing the top cover to the base enclosure through the battery 
bay (documented in Section 5.11)
2 2 screws securing the top cover to the base enclosure through the top 
(documented in Section 5.11) 

Maintenance and Service GuideC–5
Ta b l e  C - 2
M2.5 × 4.5 Screw (Continued)
Color Qty Length ThreadHead 
Width
Black 15 4.5 mm M2.5 4 mm
Where used:
1 2 screws securing the diskette drive to the top cover (documented in 
Section 5.12)
2 1 screw securing the TouchPad to the top cover (documented in 
Section 5.13) 

C–6Maintenance and Service Guide
Ta b l e  C - 2
M2.5 × 4.5 Screw (Continued)
Color Qty Length ThreadHead 
Width
Black 15 4.5 mm M2.5 4 mm
Where used: 2 screws securing the fan and fan bracket to the base enclosure 
(documented in Section 5.16) 

Maintenance and Service GuideC–7
Ta b l e  C - 3
M2.5 × 7 Screw
Color Qty Length ThreadHead 
Width
Black 25 7 mm M2.5 4.5 mm
Where used:
1 screw securing the modem/network interface card compartment cover to the 
base enclosure (refer to the Hardware Guide included with the computer for 
installation procedure)
2 screws securing the memory expansion compartment cover to the base 
enclosure (refer to the Hardware Guide included with the computer for 
installation procedure)
4 screws securing the display...

C–8Maintenance and Service Guide
Ta b l e  C - 3
M2.5 × 7 Screw (Continued)
Color Qty Length ThreadHead 
Width
Black 25 7 mm M2.5 4.5 mm
Where used:
1 4 screws securing the heat sink to the base assembly (documented in 
Section 5.10)
2 10 screws securing the top cover to the base enclosure through the bottom 
of the computer (documented in Section 5.11) 

Maintenance and Service GuideC–9
Ta b l e  C - 3
M2.5 × 7 Screw (Continued)
Color Qty Length ThreadHead 
Width
Black 25 7 mm M2.5 4.5 mm
Where used: 4 screws securing the system board to the base enclosure 
through the computer bottom (documented in Section 5.17)