Home
>
Comdial
>
Telephone
>
Comdial Impression Single-Line Proprietary Telephone Station Users Guide
Comdial Impression Single-Line Proprietary Telephone Station Users Guide
Here you can view all the pages of manual Comdial Impression Single-Line Proprietary Telephone Station Users Guide. The Comdial manuals for Telephone are available online for free. You can easily download all the documents as PDF.
Page 21
Conferencing Stations Together 6.1 Conferencing (DigiTech Model) ·To conference any combination of inside stations and outside lines, 1. Make first call. 2. PressTA P. 3. Make next call and pressTA P. 4. Repeatstep2toadduptotwomoreparties. 6.2 Conferencing (Impresion Model) ·To conference any combination of inside stations and outside lines, 1. Make first call. 2. PressTRANSFER/CONFERENCE. 3. Make next call and pressTRANSFER/CONFERENCEto establish conference. 4. Repeatstep2toadduptotwomoreparties. NOTES:...
Page 22
·To drop out of a conference call between you and two outside lines (creating an unsupervised conference), 1. Dial#(when only one party drops out of an unsupervised conference, the other party remains on hold until he or she hangs up or the line is answered). ·To rejoin an unsupervised conference between two outside lines, 1. PressTA P. NOTE: Conference volume levels depend upon the quality of the external lines. Conferencing GCA70-227 6–2 SLPS Station Users Guide
Page 23
Using The Other Features 7.1 Using Call Forwarding ·To forward your calls to another telephone in the system, 1. Lift handset and listen for intercom dial tone. 2. Dial forwarding code: S52= all calls forward immediately, S54= all calls forward after busy or no answer, S51= prime line and personal intercom calls forward immediately, S53= prime line and personal intercom calls forward on busy or no answer. 3. Dial extension number of station to which you want to forward your calls. 4. Hang up handset to...
Page 24
7.2 Making A Paging Announcement ·To send a paging announcement through an external public address speaker, 1. Lift handset and listen for intercom dial tone. 2. Dial assigned code for external paging. 3. Make announcement. 4. Hang up handset. ·To send a paging announcement through some or all system telephone speakers, 1. Lift handset and listen for intercom dial tone. 2. Dial71–77for zones1–8[in the default mode, code70(zone 1) provides an all-call function]. 3. Make announcement. 4. Remain on line if...
Page 25
7.3 Switching the Dialing Mode ·If the local telephone service is pulse (rotary), convert to tone while dialing as follows: 1. Press#at point in dialing sequence where conversion to tone is required. NOTE: You can program pulse/tone switching into memory keys by pressing#at the proper location while you are storing numbers. 7.4 Programming Your Telephone ·To store an outside number as a speed dial number, 1. Lift handset. 2. DialSS1. 3. Dial1–0to choose storage location. 4. Dial01–16to select line...
Page 26
7.5 Setting Your Personal Ringing Tones ·To select one of the ring tones, proceed as follows: 1. Lift handset. 2. DialSS4. 3. Dial number (1–8) to select ring tone. 4. Hang up handset to end. 7.6 Setting The Do Not Disturb ·To enable DND, proceed as follows: 1. Lift handset and dial#01. 2. Hang up handset to end. ·If allowed by system programming, you can override a do not disturb condition at another telephone, 1. Make intercom call and hear DND tone. 2. DialS03(called party will hear several short tone...
Page 27
Using The Messaging Features Your telephone has two non-verbal messaging features. The first one allows you to turn on a message-waiting light on another station, alerting the user of that station that you have a message for him or her. The second feature lets you select one of the system-supplied LCD messages to send to a calling LCD speakerphone. The system can store up to thirty of these messages (for example,I Will Call Back). Your system attendant can give you a list of the messages that are...
Page 28
8.2 Retrieving Messages ·To retrieve a message, 1. Observe flashing message-waiting light. 2. Lift handset and pressHOLD. Connection to station that left message is automatic. NOTE: Only the person sending the message or the person receiving the message can turn off the message-waiting light. 8.3 Using LCD Messaging You can set system-supplied messages to display at any calling LCD speakerphone. ·To turn LCD messaging on, 1. Lift handset. 2. DialS02. 3. Press#to clear current message if you have one...
Page 29
Publication Index A Answering a Subdued Off-Hook Voice Announcement (SOHVA).......................... 2-2 Answering Calls..................................... 2-1 Answering Calls Ringing at Another Station............... 2-1 Answering Calls Ringing at Your Station................. 2-1 Answering Night Calls................................ 2-1 Automatic Call Back, Using............................ 3-3 C Call Forwarding, Using............................... 7-1 Call Holding,...
Page 30
M Making a Screened Transfer............................ 5-1 Making an Unscreened Transfer........................ 5-1 Making a Paging Announcement........................ 7-2 Making Calls........................................ 3-1 Message Waiting Light, Controlling the.................. 8-1 Messages, Retrieving................................. 8-2 Messaging Features, Using............................. 8-1 Messaging, Using LCD............................... 8-2 P...