Comdial Executech XE, XL Key System Instructions Manual

							Personal Ring Tones = 
ITCM *t4 +l (Tonel) 
+ 2 (Tone 2) 
+ 3 (Tone 3) 
+ 4 (Tone 4) 
Auto Dials 
1. Press lTCMt+kl. 
2. Press Auto dial softkey. ‘ 
3. Select line or ITCM choice (optional). 
4. Dial number to be stored (up to 15 digits). 
NOTE: l Digits O-9 can be stored 
l Hookflash can be stored by pressing TAP. 
l Intercom can be stored by pressing ITCM. 
l Pause can be stored by pressing HOLD. 
5a. 
Press T/C and repeat steps 2-4. 
-or- 
5b. Press SPKR to quit. 
6. Log all stored numbers on back of this user 
guide. 
Station Speed Dial 
1. Press ITCM +k +k 2. 
2. Press a softkey keypad digit (0 through 9). 
3. Repeat steps 3 through 6 as detailed above 
(Auto Dials). 
DSS 
1. Press ITCM % +# 3. 
2. Press softkey. 
3 Dial extension. 
4. Repeat 2 and 3 as required 
5 Press SPKR to quit. 
AUTO REDIAL KEY 
1. Press lTCM+k-%l. 
2. Press desired softkey. 
3. Press #. 
4. Press SPKR to quit. STATION SPEED DIAL RECORD 
2 
3 
4 
6 
7 
8 
9 
AUTO DIAL RECORD 
010 
O/O 
0 0 
0 0 
0 0 
0 0 
O1O 
COMDIAL 
Charlottesville, Virginia 22906-7266 
1 (804) 978-2200 
ExecuTech 
Model XE/XL Key 
System 
User’s Guide 
Printed in U.S.A. GCA 70-11;;;  
						

							Standard 
e Lift handset. 
l Press flashing LINE or ITCM key 
l Talk. 
Speakerphone 
l Press flashing LINE or ITCM key. 
l Talk. ‘ 
Station ~11th Ringing Line Preference 
With calls ringing at this station, 
. Lift handset. 
. Talk. 
Call Pickup - Direct 
- ITCM. 
. ++4. 
. Station number (of ringing station). 
Call Pickup - System 
l ITCM. 
e #4. 
Standard 
l Lift handset. 
l Select LINE or ITCM key. 
l Dial number or press auto dial key. 
l Talk. 
Speakerphone 
. Press LINE or ITCM key. 
l Dial number or press auto dial key. 
l Talk. 
NOTE: Selecting Autodial/Speed Dial/or DSS 
eliminates need for: select LINE or ITCM + dial no.. 
Voice Announce 
l Lift handset. 
l Press DSS (or Press ITCM and dial station 
number). 
l Make announcement. 
Station Speed Dial 
While station is idle, 
l Press keypad digit 0 - 9 (see Number Record 
on back of this page). 
Sysfem Speed Dial 
While station is idle, 
l Press ?K and two digit memory location (see 
attendant for list). 
Last Number Redial 
While station is idle, 
l Press #. 
Auto Redial 
While station is idle, 
l Press assigned Auto Redial key (refer to 
programming instructions on back of this 
page). 
Transferring Line Call 
. Press T/C. 
l Press DSS (or dial intercom party station num- 
ber). 
When intercom party answers, 
l Announce call and line number. 
l Hang up handset (or speaker off). 
Conferencing 
Multiline conference (2 external parties, 1 internal 
w-04 
To set up, 
l Establish.first outside call and press T/C. 
l Establish second outside call and press T/C. To drop one conferee and remain active with other 
conferee, 
l Press HOLD. Both lines placed on hold. 
l Press LINE key of party to be dropped. 
l Press and release hookswitch. 
l Press LINE key of party to be retained. 
l Resume conversation. 
Add-on conference (1 external party, 2 internal 
parties) 
l Establish outside call. 
l Press ITCM (outside call placed on hold 
automatically). 
0 Dial extension number of intercom party. 
l Waif for answer. 
0 Press T/C (a three-way connection is estab- 
lished) . 
Set 
l While on line, press HOLD (regular HOLD). 
. While on line, press HOLD + HOLD (exclusive 
HOLD). 
Retrieve 
l Press flashing held LINE key. 
Call Attendant = ITCM 0 
Background Music = ITCM *l (ON) #l (OFF) 
Voice Announce Blocked = ITCM *2 (ON) ti (OFF) 
Call Pickup-Directed = ITCM +++4 + Ringing ext. 
Call Pickup-System = ITCM #4 
Zone 1 Paging = ITCM 4 
Zone 2 Paging = ITCM 5 
Zone 3 Paging = ITCM 6 
All Call Paging = ITCU 7